Linux and to default gateway

How to set the Default gateway

You can use route like in route add default gw 192.168.0.254 for example.

And if route is not present, but ip is, you can use it like this: ip route add default via 192.168.0.254 dev eth0 , assuming that 192.168.0.254 is the ip of your gateway

ifconfig is deprecated on Linux and furthermore, it’s the wrong tool for the job. To set the default gateway on Linux use the ip command as follows:

ip route add default via dev # e.g. ip route add default via 192.168.0.101 dev eth0 

For remove gateway in Linux Command : route delete default gw 192.168.1.1 eth1

For add gateway in Linux Command : route add default gw 192.168.1.250 eth1

example: route add default gw 192.168.1.2 eth0

OR use hostname such as dsl-router:

route add default gw dsl-router eth0 

Or use the ip command (newer syntax) to route all traffic via 192.168.1.254 gateway connected via eth0 network interface for example:

ip route add 192.168.1.0/24 dev eth0 

ip route add 192.168.1.0/24 via 192.168.1.254 

You must log in to answer this question.

Highly active question. Earn 10 reputation (not counting the association bonus) in order to answer this question. The reputation requirement helps protect this question from spam and non-answer activity.

Linked

Related

Hot Network Questions

Subscribe to RSS

To subscribe to this RSS feed, copy and paste this URL into your RSS reader.

Site design / logo © 2023 Stack Exchange Inc; user contributions licensed under CC BY-SA . rev 2023.7.14.43533

Linux is a registered trademark of Linus Torvalds. UNIX is a registered trademark of The Open Group.
This site is not affiliated with Linus Torvalds or The Open Group in any way.

By clicking “Accept all cookies”, you agree Stack Exchange can store cookies on your device and disclose information in accordance with our Cookie Policy.

Источник

How to Add or Change the Default Gateway in Linux

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 14 people, some anonymous, worked to edit and improve it over time.

This article has been viewed 1,011,156 times.

If you need to find or change the IP address of your default gateway or router on Linux, you’re in luck—it’s super easy to do. This wikiHow article will show you how to use the route command to find the default gateway IP address on Linux, and how to set a new default gateway in your /etc/network/interfaces configuration file.

Using the Terminal

Open the Terminal. You can open the Terminal from the side bar, or by pressing Ctrl + Alt + T . [1] X Research source

View your current default gateway. You can check what your default gateway is set to by typing route and pressing ↵ Enter . The address next to «default» shows your default gateway, and the interface it is assigned to is displayed on the right side of the table.

• Type sudo route delete default gw IP Address Adapter . For example, to delete the default gateway 10.0.2.2 on the eth0 adapter, type sudo route delete default gw 10.0.2.2 eth0 .

Type . sudo route add default gw IP Address Adapter . For example, to change the default gateway of the eth0 adapter to 192.168.1.254, you would type sudo route add default gw 192.168.1.254 eth0 . [3] X Research source You’ll be prompted for your user password in order to complete the command.

Editing Your Configuration File

Open the configuration file in an editor. Type sudo nano /etc/network/interfaces to open the file in the nano editor. Editing your configuration file will keep your changes every time the system restarts. [4] X Research source

Navigate to the correct section. Find the section for the adapter you want to change the default gateway for. For a wired connection, this is usually eth0 .

Add . gateway IP Address to the section. For example, type gateway 192.168.1.254 to make the default gateway 192.168.1.254. [5] X Research source

Restart your network. Restart your network by typing sudo /etc/init.d/networking restart . [6] X Research source

Community Q&A

Thanks! We’re glad this was helpful.
Thank you for your feedback.
As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy! Claim Your Gift If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow

Tips

You Might Also Like

A Complete Guide to Managing an iPod in Linux

Can Linux Run .exe Files? How to Run Windows Software on Linux

How to Open Linux Firewall Ports: Ubuntu, Debian, & More

How to Run an INSTALL.sh Script on Linux in 4 Easy Steps

Use Ping in Linux: Tutorial, Examples, & Interpreting Results

How to Delete Read-Only Files in Linux

How to Install Linux on Your Computer

Источник

How to Set the Default Gateway on Ubuntu

All the devices on your network rely on the default gateway for communication. Data packets pass through the router to and from your network before being routed to the particular device that owns the packet.

Each operating system comes with a default gateway. However, you can temporarily or permanently change the default gateway to add another route for your network devices. You can use the IP command on Ubuntu to modify your default gateway.

Checking the Default Gateway

Changing the default gateway is common when you have different sub-networks or when you must point a specific machine to a particular gateway. Before changing the default gateway, let’s list the available routes.

Use the list option with the IP command or its shorthand r to stand for the route.

The default gateway has the default keyword in it. If you configured multiple routes on your network, you can use the grep command to filter the router and get the default gateway.

Use the following command:

The current default gateway is 192.168.88.1 on enp0s3 interface. Let’s proceed to set a new default gateway.

How to Set a New Default Gateway

The ip command uses the route option to set the new default gateway. You must specify the type of route that you want to add. In our case, it’s “default”.

For instance, let’s set the default gateway as 192.168.88.10.

Suppose we want to set the default gateway for a particular network interface. In that case, specify the network interface after the gateway. In our case, the interface is enp0s3.

Note that we must add sudo to use the administrator privileges since we are editing the routing table for Ubuntu which is an administrative task.

We can use the list or route options to verify the newly added default gateway.

Note how the currently added default gateway is the one that we specified earlier. In the previous output, we now have two default gateways. The keynote is that the changes we made are temporary until you add them to the network manager configuration files.

In the previous case, we can delete the added gateway such that we remain with only one.

Use the delete keyword to remove the added gateway.

If we check the available default gateway after running the delete command, we confirm that we only have one default gateway remaining which is 192.168.88.1.

Suppose we want to make the permanent network changes to implement the new gateway. We must edit the configuration file. Open the network manager file using a file editor of your choice. In this case, let’s use gedit with the following command:

Add the new gateway using the following presented format. Make sure that the spacing is set to two whitespaces with the correct indention. Once edited, save the file and exit the editor.

Before applying the changes using the netplan command, run a dry test.

If you are sure with the new network configuration, press the enter key. Otherwise, the changes will revert to the previous settings after the specified seconds.

Conclusion

Ubuntu comes with a default gateway, but that doesn’t mean that you can’t set a new gateway. This guide covered everything about adding a new gateway using the ip command and how to save the changes permanently to the configuration file.

About the author

Denis Kariuki

Denis is a Computer Scientist with a passion for Networking and Cyber Security. I love the terminal, and using Linux is a hobby. I am passionate about sharing tips and ideas about Linux and computing.

Источник

How To Add or Change Default Route or Default Gateway in Ubuntu, Linux?

Systems connected to the network will generally access to the internet. In order to access to the internet they need some network configuration like gateway or default gateway. In this tutorial we will examine how to add or change default gateway in Ubuntu, Debian, CentOS, Fedora, Mint, Kali operating systems.

List Routing Table

Routing table is used to route IP network communication. Hosts generally uses default route to send packages which will redirect them accordingly to transmit destination. We will start by listing current routing table. We will use ip route show command like below.

Our default gateway line is

default via 192.168.122.1 dev ens3

• default means this line is default gateway
• via 192.168.122.1 specifies next hop which is default gateway IP address
• dev ens3 is the interface we want use to access default gateway

Remove Existing Default Gateway

Removing default gateway is easy if we list routing table because routing table line is used with del command like below. But keep in mind if you are connecting system remotely from different network which means if you are using default route you connection will be lost.

$ ip route del default via 192.168.122.1 dev ens3

• ip route del is our key line which deletes specified default gateway
• default via 192.168.122.1 dev ens3 is the same as routing table

Add New Default Gateway

As stated previously default gateway is used to send packages in order to transmit to the destination. We can add new default gateway with the ip route add command like below.

$ ip route add default via 192.168.1.1 dev ens3

• ip route add will add provided default gateway
• default means target network is all which is default
• via 192.168.1.1 is our default gateway network address
• dev ens3 is network interface for default gateway

Check

List routing table again and ping some of remote networks will give the status of default gateway

$ ip route show default via 192.168.1.1 dev ens3 10.0.3.0/24 dev lxcbr0 proto kernel scope link src 10.0.3.1 192.168.122.0/24 dev ens3 proto kernel scope link src 192.168.122.211

How To Add or Change Default Route or Default Gateway in Ubuntu, Linux? Infografic

Источник