Linux checking user permissions

How to check permissions of a specific directory?

I know that using ls -l «directory/directory/filename» tells me the permissions of a file. How do I do the same on a directory? I could obviously use ls -l on the directory higher in the hierarchy and then just scroll till I find it but it’s such a pain. If I use ls -l on the actual directory, it gives the permissions/information of the files inside of it, and not of the actual directory. I tried this in the terminal of both Mac OS X 10.5 and Linux (Ubuntu Gutsy Gibbon), and it’s the same result. Is there some sort of flag I should be using?

10 Answers 10

-d, --directory list directory entries instead of contents, and do not dereference symbolic links 

You might be interested in manpages. That’s where all people in here get their nice answers from.

I think the man page is poorly worded. I scoured it five times before I started googling. I don’t want directory ‘entries’ (thing ‘entered’ into directories? Like their files and sub-directories?) nor their ‘contents’ (they sound like the same concept to me), I want the directories themselves.

it’s completely standard terminology, the directories themselves are the directory entries, i.e. entries in the filesystem

It may be standard terminology, but to someone who would likely be asking such a question, it is probably confusing jargon.

You can also use the stat command if you want detailed information on a file/directory. (I precise this as you say you are learning ^^)

— indicates the beginning of the command options.

l asks for a long list which includes the permissions.

d indicates that the list should concern the named directory itself; not its contents. If no directory name is given, the list output will pertain to the current directory.

In GNU/Linux, try to use ls , namei , getfacl , stat .

For Dir

[flying@lempstacker ~]$ ls -ldh /tmp drwxrwxrwt. 23 root root 4.0K Nov 8 15:41 /tmp [flying@lempstacker ~]$ namei -l /tmp f: /tmp dr-xr-xr-x root root / drwxrwxrwt root root tmp [flying@lempstacker ~]$ getfacl /tmp getfacl: Removing leading '/' from absolute path names # file: tmp # owner: root # group: root # flags: --t user::rwx group::rwx other::rwx [flying@lempstacker ~]$ 

[flying@lempstacker ~]$ stat -c "%a" /tmp 1777 [flying@lempstacker ~]$ stat -c "%n %a" /tmp /tmp 1777 [flying@lempstacker ~]$ stat -c "%A" /tmp drwxrwxrwt [flying@lempstacker ~]$ stat -c "%n %A" /tmp /tmp drwxrwxrwt [flying@lempstacker ~]$ 

For file

[flying@lempstacker ~]$ ls -lh /tmp/anaconda.log -rw-r--r-- 1 root root 0 Nov 8 08:31 /tmp/anaconda.log [flying@lempstacker ~]$ namei -l /tmp/anaconda.log f: /tmp/anaconda.log dr-xr-xr-x root root / drwxrwxrwt root root tmp -rw-r--r-- root root anaconda.log [flying@lempstacker ~]$ getfacl /tmp/anaconda.log getfacl: Removing leading '/' from absolute path names # file: tmp/anaconda.log # owner: root # group: root user::rw- group::r-- other::r-- [flying@lempstacker ~]$ 

[flying@lempstacker ~]$ stat -c "%a" /tmp/anaconda.log 644 [flying@lempstacker ~]$ stat -c "%n %a" /tmp/anaconda.log /tmp/anaconda.log 644 [flying@lempstacker ~]$ stat -c "%A" /tmp/anaconda.log -rw-r--r-- [flying@lempstacker ~]$ stat -c "%n %A" /tmp/anaconda.log /tmp/anaconda.log -rw-r--r-- [flying@lempstacker ~]$ 

Источник

Linux File Permission Tutorial: How to Check and Change Permissions

Linux, like other Unix-like operating systems, allows multiple users to work on the same server simultaneously without disrupting each other.

Individuals sharing access to files pose a risk exposing classified information or even data loss if other users access their files or directories. To address this, Unix added the file permission feature to specify how much power each user has over a given file or directory.

In this tutorial, you will learn how to view and change file permissions in Linux.

How to View Check Permissions in Linux

To start with file permissions, you have to find the current Linux permission settings. There are two options to choose from, depending on your personal preference: checking through the graphical interface or using the command.

Check Permissions using GUI

Finding the file (directory) permission via the graphical user interface is simple.

1. Locate the file you want to examine, right-click on the icon, and select Properties.

2. This opens a new window initially showing Basic information about the file.
Navigate to the second tab in the window, labeled Permissions.

3. There, you’ll see that the permission for each file differs according to three categories:

• Owner (the user who created the file/directory)
• Group (to which the owner belongs to)
• Others (all other users)

For each file, the owner can grant or restrict access to users according to the categories they fall in.

In our example, the owner of the file test.txt has access to “Read and write”, while other members of its group, as well as all other users, have “Read-only” access. Therefore, they can only open the file, but cannot make any modifications.

To alter the file configuration, the user can open the drop-down menu for each category and select the desired permission.

Additionally, you can make the file executable, allowing it to run as a program, by checking the Execute box.

Check Permissions in Command-Line with Ls Command

If you prefer using the command line, you can easily find a file’s permission settings with the ls command, used to list information about files/directories. You can also add the –l option to the command to see the information in the long list format.
To check the permission configuration of a file, use the command:

For instance, the command for the previously mentioned file would be:

As seen in the image above, the output provides the following information:

• file permission
• the owner (creator) of the file
• the group to which that owner belongs to
• the date of creation.

It shows the permission settings, grouped in a string of characters (-, r, w, x) classified into four sections:

1. File type. There are three possibilities for the type. It can either be a regular file (–), a directory (d) or a link (i).
2. File permission of the user (owner)
3. File permission of the owner’s group
4. File permission of other users

The characters r, w, and x stand for read, write, and execute.
The categories can have all three privileges, just specific ones, or none at all (represented by –, for denied).

Users that have reading permission can see the content of a file (or files in a directory). However, they cannot modify it (nor add/remove files in a directory). On the other hand, those who have writing privileges can edit (add and remove) files. Finally, being able to execute means the user can run the file. This option is mainly used for running scripts.

In the previous example, the output showed that test.txt is a regular file with read and write permission assigned to the owner, but gives read-only access to the group and others.

Using Chmod Command to Change File Permissions

As all Linux users, you will at some point need to modify the permission settings of a file/directory. The command that executes such tasks is the chmod command.

chmod [permission] [file_name]

There are two ways to define permission:

1. using symbols (alphanumerical characters)
2. using the octal notation method

Define File Permission with Symbolic Mode

To specify permission settings using alphanumerical characters, you’ll need to define accessibility for the user/owner (u), group (g), and others (o).

Type the initial letter for each class, followed by the equal sign (=) and the first letter of the read (r), write (w) and/or execute (x) privileges.

To set a file, so it is public for reading, writing, and executing, the command is:

chmod u=rwx,g=rwx,o=rwx [file_name]

To set permission as in the previously mentioned test.txt to be:
• read and write for the user
• read for the members of the group
• read for other users

Use the following command:

Note: There is no space between the categories; we only use commas to separate them.

Another way to specify permission is by using the octal/numeric format. This option is faster, as it requires less typing, although it is not as straightforward as the previous method.

Instead of letters, the octal format represents privileges with numbers:

The privileges are summed up and depicted by one number. Therefore, the possibilities are:

• 7 – for read, write, and execute permission
• 6 – for read and write privileges
• 5 – for read and execute privileges
• 4 – for read privileges

As you have to define permission for each category (user, group, owner), the command will include three (3) numbers (each representing the summation of privileges).

For instance, let’s look at the test.txt file that we symbolically configured with the chmod u=rw,g=r,o=r test.txt command.

The same permission settings can be defined using the octal format with the command:

Define File Permission in Octal/Numeric Mode

Note: If you need a more in-depth guide on how to use Chmod In Linux to change file permissions recursively, read our Chmod Recursive guide.

Changing User File and Group Ownership

Aside from changing file permissions, you may come across a situation that requires changing the user file ownership or even group ownership.

Performing either of these tasks requires you first need to switch to superuser privileges. Use one of the options outlined in the previous passage.

To change the file ownership use the chown command:

chown [user_name] [file_name]

Instead of [user_name] type in the name of the user who will be the new owner of the file.

To change the group ownership type in the following command:

chgrp [group_name] [file_name]

Instead of [group_name] type in the name of the group that will be the new owner of the file.

Learning how to check and change permissions of Linux files and directories are basic commands all users should master. To change file’s group permissions, you might find helpful our article on how to use the chgrp command.

No matter whether you prefer using the GUI or command-line, this article should help you better understand how to use file permissions.

Источник

How do I know a specified user’s permissions on Linux with root access?

I have root access to my local server. Some days ago, my colleague created a user on that server, giving me the username and password, but the user has minimized permissions. For instance, the user can’t even create a file under its own home directory. Is there any concept about «the permissions of a user»? If there is, how do I check/modify it?

3 Answers 3

It may be the case that your colleague, while creating the account, created the home directory «by hand» which resulted in it being owned by root . Try running the following as root :

chown -R username ~username chgrp -R $(id -gn username) ~username 

Where username is the name of the problematic account.

If this turns out to be your problem, to avoid this happening in the future, you want to add the -m switch to the useradd command line used to create the user account. This ensures that the user’s selected home directory is created if it doesn’t exist. This creates the home directory with the «right» ownership and permissions so you don’t face this kind of issue.

The chgrp command added above will change group ownership of the entire home directory of username to username ‘s primary group. Depending on your environment, this may not be exactly what you want and you’ll possibly need to change group ownership of specific sub-directories inside the home-directory «manually», thereby setting different group ownership for different sub-directories. This is usually not the case for personal computers, but since you mentioned «a colleague», I’m assuming we’re talking about a networked office environment, in which case group ownership is important for shared directories.

Источник