Linux crontab каждый день

Use the Crontab Utility to Schedule Tasks on Oracle Linux

This tutorial shows you how to use the crontab command on Oracle Linux. This tutorial is targeted at Oracle Linux 8 users, but the commands are also available on other Oracle Linux releases.

Background

Oracle Linux can run programs automatically as scheduled tasks or jobs. You can either schedule programs to run as system-level tasks by editing cron configuration in /etc/cron* ; or you can schedule programs to run as jobs within your user crontab. If you do not have system administrator access on a system or the programs that you wish to schedule are specific to your user account, the crontab utility provides a good mechanism to run programs on a regular schedule under your own user credentials. The crontab allows you to schedule jobs to run as often as every minute or as infrequently as once a year; however you should note that cron job will not run if the system is down during the time that the job was scheduled to run.

This tutorial is targeted at Oracle Linux 8 users, but the crontab is also available for Oracle Linux 7 and the contents of this tutorial should equally apply on that platform. Note that cron configuration is standard on most Linux systems and has been available for Unix-like systems since 1975. More complex scheduling solutions are included in Systemd in the form of timers and users are encouraged to explore Systemd timers in more depth to solve specific requirements. However, this tutorial provides foundational training that is more suitable for the average user.

What Do You Need?

Objectives

In this tutorial you learn to:

• List the contents of an existing crontab
• Create and edit crontab entries
• Access crontab output
• Remove the full crontab for a user

List the contents of your crontab file

Note: When using the free lab environment, see Oracle Linux Lab Basics for connection and other usage instructions.

Use the crontab -l command to list the contents of your crontab file.

If no crontab entry exists for the user, the following message is displayed:

Create or edit your crontab

• You can jump to the bottom of the file by pressing ‘Shift-g’.
• Hit the ‘i’ key to enter insert mode.
• Enter the crontab line.
• Hit the ‘Esc’ key to exit insert mode.
• Enter ‘:wq’ to write the file and to quite the editor.

This step installs the crontab and makes it active immediately:

crontab: installing new crontab 

Each job appears on its own line in the crontab. The crontab has 5 space separated fields that define the different time periods that can be configured, followed by the command that is run for the job. The command can be equivalent to any command that you can run on the command line on the system, allowing you to run your own scripts or to take advantage of pipes and redirection operators.

Check your cron entry output

No Mail Transport Agent (MTA) is installed on a minimal Oracle Linux system or on an Oracle Linux platform image, by default. When no MTA is found, the cron daemon directs the output from commands specified in the crontab to the Syslog daemon. On a new install of Oracle Linux 8, you can view crontab output in the log file at /var/log/cron .

Run the following command to view the output generated by your new crontab entry:

Note that the cron task only runs every minute, so you may need to wait for a minute before you run the command. The output for this cron entry should appear similar to:

Jun 30 12:39:02 ol8-server CROND[68564]: (oracle) CMD (echo "Hello World") Jun 30 12:39:02 ol8-server CROND[68551]: (oracle) CMDOUT (Hello World) 

This output shows the user that the command is run as, the command that was run and then shows the command output.

If an MTA, such as postfix or sendmail is installed, cron directs the output from the crontab entry to the mail spool for the user that the crontab entry runs as. This is discussed further, later in this tutorial.

Crontab time sequence options

Crontab time fields are defined in the following sequence:

• minute: From 0 to 59
• hour: From 0 to 23
• day: From 1 to 31
• month: From 1 to 12, or the name of the month
• day-of-week: From 0 to 7, or the abbreviated name of day. Note that 0 and 7 both represent Sunday.

Special characters can be used within any of the time fields:

• Asterisk (*): Specifies that the command should be run for every instance of the field
• Hyphen (-): Can be used to indicate a range. For example, in the day-of-week field, you might specify 1-5 to schedule the task to run from Monday to Friday, but not to run on Saturday or Sunday.
• Comma (,): Can be used to specify a list of values for a field. For example, in the hour field, you might specify 6,18 to schedule the task to run at 6am and 6pm.
• Forward slash (/): Can be used to specify step values. For example, you could specify */15 in the minutes field to schedule a task to run every 15 minutes.

The crontab also allows you to use a special shorthand extension to replace the time fields for general time requirements. Importantly, this shorthand also includes an option to run a command after reboot:

• @reboot : Run once after reboot.
• @yearly : Run once a year, ie. “0 0 1 1 *”.
• @annually : Run once a year, ie. “0 0 1 1 *”.
• @monthly : Run once a month, ie. “0 0 1 * *”.
• @weekly : Run once a week, ie. “0 0 * * 0”.
• @daily : Run once a day, ie. “0 0 * * *”.
• @hourly : Run once an hour, ie. “0 * * * *”.

Note that the crontab only provide 1 minute granularity. It is not straightforward to set a crontab entry that runs more frequently than every minute. If you are looking for a tool that can handle this, consider looking into Systemd timer units.

Edit the crontab to try different running commands at different time sequences

*/15 * * * * echo "This crontab entry runs every 15 minutes" 10 * * * * echo "This crontab entry runs at 10 minutes past every hour" 30 13 * * 3 echo "This crontab entry runs at 13h30 on every Wednesday" @reboot echo "This command runs once after a reboot event" 

Crontab command syntax

The crontab command runs under the credentials of the user that the crontab belongs to and runs with some default environment variables set, including:

• HOME: The home directory for the user that the crontab runs as
• LOGNAME: Equivalent to the user name of the user that the crontab runs as
• USER: The user name of the user that the crontab runs as
• SHELL: The shell binary that is used to run commands. This is set to /bin/sh by default.
• PATH: The path available to the crontab utility. This is set to /usr/bin:/bin by default.

You can set alternate environment variables by specifying them as lines within the crontab that do not include time fields, for example if you would prefer to use the bash shell and you want to regularly import all of the variables and settings withing your personal .bashrc configuration, you may edit your crontab to look as follows:

SHELL=/bin/bash * * * * * source $HOME/.bashrc; 

Since the command run for a crontab job is executed within a shell environment, standard shell syntax applies and can be used to pipe or redirect output. For example to redirect all output to /dev/null, disabling any mailed output for the job as a result, use standard shell redirects for the STDOUT and STDERR output on the command:

* * * * * /path/to/command > /dev/null 2>&1 

Alternately, you could redirect output to append to a file that you could use to track command output for each time it is run:

* * * * * /path/to/command >> $HOME/command.log 

Edit your crontab to experiment with command syntax

*/15 * * * * echo "This 'silent' crontab entry runs every 15 minutes but output is redirected to /dev/null" > /dev/null 2>&1 * * * * * echo "The date and time is $(date +\%Y-\%m-\%d\ \%H:\%M:\%S)" >> $HOME/crontab.log 

Within a minute, a crontab.log file should appear in the $HOME directory. You can view the contents of this file by running:

Access crontab output in the local mail spool

If an MTA is installed, all crontab output is mailed to the user’s system mail spool, by default.

Note: The following instructions are for example purposes only, and do describe not a complete configuration for a mail transfer agent (MTA). The configuration defaults may not be appropriate for your installation. If you are enabling postfix on a system, please also read Oracle Linux: Install the Postfix Email Server for information on configuring it properly.

For crontab mail handling to work correctly, you must install, configure and enable an MTA correctly. For the purpose of this exercise, you can simply perform the following steps to enable the postfix MTA to handle local mail:

sudo dnf install -y postfix 

sudo systemctl enable --now postfix.service 

sudo systemctl restart crond.service 

If you have not configured your crontab to redirect output to an alternate mail address or to discard output for your cron jobs, the output for each job is automatically delivered into the local mail spool for the user. The mail spool is usually stored as a single mail file that can be accessed at /var/spool/mail/$USER. If you are simply monitoring recent activity, it is easiest to tail this file to see mail as it is delivered:

To review the output of each cron job in a manageable interface, install the mailx package and use the mail command to view the contents of the mail spool:

Mail is listed in the following way:

Mail version 12.5 7/5/10. Type ? for help. "/var/spool/mail/oracle": 1 messages 1 new >N 1 (Cron Daemon) Wed Aug 5 23:48 30/1436 "Cron oracle & 

Enter the number of the mail message to view. For example, enter 1 to view the first message in the queue:

Use the header command to return to the mail headers listing, or use the quit command to exit the application.

You can change the email address that is used to mail cron output by setting the MAILTO environment variable in your crontab, but your system must be configured to handle external mail delivery. If you set the MAILTO environment to an empty value, output is discarded and no mail is sent for any cron job in the crontab.

Remove the entire crontab

Use the crontab -r command to remove the entire crontab for a user.

This command removes all cron job entries that you have specified for your user. If you only want to remove a specific job entry, use crontab -e to edit the crontab and remove the line for the job that you want to remove.

Video Demonstration

A video demonstration is provided at https://www.youtube.com/watch?v=BpPGoRYTv9I if you need more information on working with the crontab utility on Oracle Linux 8.

More Information

More Learning Resources

Explore other labs on docs.oracle.com/learn or access more free learning content on the Oracle Learning YouTube channel. Additionally, visit education.oracle.com/learning-explorer to become an Oracle Learning Explorer.

For product documentation, visit Oracle Help Center.

Use the Crontab Utility to Schedule Tasks on Oracle Linux

Copyright © 2021, Oracle and/or its affiliates.

Источник