Linux info cpu ram

Linux: How to get CPU and memory information

To see what type of processor/CPU your computer system has, use this Linux command:

As you can see, all you have to do is use the Linux cat command on this special /proc/cpuinfo file on your Linux system. (See below for sample processor output.)

How to show Linux memory information

To see your Linux memory information and memory stats use this command:

(See below for sample output.)

Linux processor command output

When I issue that Linux processor information command on my current hardware system, I see this output:

# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Pentium(R) 4 CPU 3.00GHz stepping : 1 cpu MHz : 3007.103 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pni monitor ds_cpl cid xtpr bogomips : 6016.05 processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Pentium(R) 4 CPU 3.00GHz stepping : 1 cpu MHz : 3007.103 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pni monitor ds_cpl cid xtpr bogomips : 6012.84

From that output I can see my current system is a two-processor Intel system, with additional information about the Intel CPU (CPUs, actually).

Linux memory information command

When I issue the Linux memory information command, I see the following output:

# cat /proc/meminfo MemTotal: 2067508 kB MemFree: 92788 kB Buffers: 246168 kB Cached: 1362296 kB SwapCached: 0 kB Active: 1073132 kB Inactive: 637304 kB HighTotal: 1171392 kB HighFree: 7228 kB LowTotal: 896116 kB LowFree: 85560 kB SwapTotal: 2096472 kB SwapFree: 2096352 kB Dirty: 6584 kB Writeback: 0 kB AnonPages: 101832 kB Mapped: 20440 kB Slab: 255360 kB PageTables: 1760 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 3130224 kB Committed_AS: 306204 kB VmallocTotal: 114680 kB VmallocUsed: 3708 kB VmallocChunk: 110860 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 Hugepagesize: 4096 kB

As you can see, my current Linux system has 2 GB RAM, with all the additional memory information shown there.

Summary: Linux processor and memory commands

I hope these Linux processor and memory commands have been helpful. When you have some spare time, take a look at the /proc filesystem on your Linux system for other system information you can find, including /proc/loadavg , /proc/vmstat , and much more.

Источник

7 Linux commands to gather information about your system

There are many situations when you need to obtain information about your Linux system, whether it’s hardware, embedded software such as the BIOS, or how they relate to the operating system.

You need this information to understand your system better, install appropriate software and drivers, apply patches, obtain vendor support, plan expansions and upgrades, and use your system fully.

Great Linux resources

In general, Linux distributions provide many tools you can use to display system information. Often, you can query one of the virtual filesystems like /proc or /sys directly, but they may provide basic information that’s hard to understand at a glance.

This article looks at seven commands that provide details about your system’s CPU, disk, RAM, devices, and firmware, in a direct and easy-to-understand way. These utilities compile information from different sources to present a relevant summary that aids you in understanding the system’s capabilities.

I’ll start by looking at the CPU.

Display CPU information

The lscpu utility provides a comprehensive summary of your CPU’s capabilities, including model information, the number of cores, speeds, flags, virtualization capabilities, and security mitigations applied.

$ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Address sizes: 48 bits physical, 48 bits virtual Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Vendor ID: AuthenticAMD Model name: AMD Ryzen 7 PRO 5850U with Radeon Graphics CPU family: 25 Model: 80 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 2 Stepping: 0 BogoMIPS: 3792.88 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm rep_good nop l cpuid extd_apicid tsc_known_freq pni pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor l ahf_lm cmp_legacy svm cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw perfctr_core ssbd ibrs ibpb stibp vmmcall fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves clzero xsaveerptr wbnoinvd arat npt lbrv nrip_save tsc_scale vmcb_clean pausefilter pfthreshold v_vmsave_vmload vgif umip pku ospke vaes vpclmulqdq rdpid fsrm arch_capabilities Virtualization features: Virtualization: AMD-V Hypervisor vendor: KVM Virtualization type: full

You can also use lscpu with the -p option to print specific fields only or -J for JSON output. Both of these options are great to parse with other programs or scripts.

Next, I’ll look at the storage.

Gather disk information

Linux provides many utilities to look at the storage and disks attached to your system, such as df , fdisk , or mount . These are great options for gathering specific information. You can also use lsblk to get an overview of your block devices at a glance:

$ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS sr0 11:0 1 1024M 0 rom zram0 251:0 0 3.8G 0 disk [SWAP] vda 252:0 0 32G 0 disk ├─vda1 252:1 0 600M 0 part /boot/efi ├─vda2 252:2 0 1G 0 part /boot └─vda3 252:3 0 30.4G 0 part /home /

This utility provides much more information, and you should check all of its options using man lsblk . I often use two options: —fs to include the filesystem type in the output and -J for JSON output to parse using other programs.

Show USB information

Use the lsusb utility to gather information about available USB devices. Your distribution may not include this utility by default. Install the usbutils package to access it:

$ sudo dnf install -y usbutils

Then use lsusb to see a list of USB devices:

$ lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd QEMU USB Tablet Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

For a more detailed output, use the -v or -t option to format the output as a tree hierarchy.

Display PCI information

Next on the list is lspci to get information about your PCI devices. This utility is part of the pciutils package, and you may need to install it, depending on your distribution:

$ sudo dnf install -y pciutils

Run lspci for a summary of all attached PCI devices:

$ lspci 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller 00:01.0 VGA compatible controller: Red Hat, Inc. Virtio GPU (rev 01) 00:02.0 PCI bridge: Red Hat, Inc. QEMU PCIe Root port 00:02.1 PCI bridge: Red Hat, Inc. QEMU PCIe Root port 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 Ethernet controller: Red Hat, Inc. Virtio network device (rev 01) 02:00.0 Ethernet controller: Red Hat, Inc. Virtio network device (rev 01) 03:00.0 USB controller: Red Hat, Inc. QEMU XHCI Host Controller (rev 01) 04:00.0 Communication controller: Red Hat, Inc. Virtio console (rev 01) 05:00.0 SCSI storage controller: Red Hat, Inc. Virtio block device (rev 01) 06:00.0 Unclassified device [00ff]: Red Hat, Inc. Virtio memory balloon (rev 01) 07:00.0 Unclassified device [00ff]: Red Hat, Inc. Virtio RNG (rev 01)

You can use the -v option for a more detailed output, -k to list the Linux kernel module in use by the device, and -s to filter specific devices based on their ID. For example, to list kernel modules for device 05:00.0 , use:

$ lspci -s 05:00.0 -k 05:00.0 SCSI storage controller: Red Hat, Inc. Virtio block device (rev 01) Subsystem: Red Hat, Inc. Device 1100 Kernel driver in use: virtio-pci

The lspci utility provides many other options, so check its man pages for more details.

Show RAM information

For basic RAM utilization information, use the command free :

$ free -m total used free shared buff/cache available Mem: 3899 269 2616 13 1013 3396 Swap: 3898 0 3898

For additional information about your RAM hardware, including the number and type of slots available, manufacturing information, sizes, and other physical details, use the dmidecode utility. This generic utility provides information about many hardware and firmware components. You can install it with the dmidecode package :

$ sudo dnf install -y dmidecode

Since dmidecode provides a huge dump of information, you can filter its output using the option -t TYPE to list specific types only. For example, to display only RAM-related information, use -t memory :

$ sudo dmidecode -t memory # dmidecode 3.3 Getting SMBIOS data from sysfs. SMBIOS 2.8 present. Handle 0x1000, DMI type 16, 23 bytes Physical Memory Array Location: Other Use: System Memory Error Correction Type: Multi-bit ECC Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 1 Handle 0x1100, DMI type 17, 40 bytes Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: 4 GB Form Factor: DIMM Set: None Locator: DIMM 0 Bank Locator: Not Specified Type: RAM Type Detail: Other Speed: Unknown Manufacturer: QEMU Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Rank: Unknown Configured Memory Speed: Unknown Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown

This command has more capabilities. I’ll check some of these out, beginning with the BIOS information.

Display BIOS information

Use dmidecode -t bios to see a summary of your BIOS information:

$ sudo dmidecode -t bios # dmidecode 3.3 Getting SMBIOS data from sysfs. SMBIOS 2.8 present. Handle 0x0000, DMI type 0, 26 bytes BIOS Information Vendor: EFI Development Kit II / OVMF Version: 0.0.0 Release Date: 02/06/2015 Address: 0xE8000 Runtime Size: 96 kB ROM Size: 64 kB Characteristics: BIOS characteristics not supported Targeted content distribution is supported UEFI is supported System is a virtual machine BIOS Revision: 0.0

The output includes the firmware version and developer information, useful for planning updates.

[ Boost security, flexibility, and scale at the edge with Red Hat Enterprise Linux. ]

Show system information

Finally, for general hardware information, including manufacturing and product serial numbers, use dmidecode -t system :

$ sudo dmidecode -t system # dmidecode 3.3 Getting SMBIOS data from sysfs. SMBIOS 2.8 present. Handle 0x0100, DMI type 1, 27 bytes System Information Manufacturer: QEMU Product Name: Standard PC (Q35 + ICH9, 2009) Version: pc-q35-7.0 Serial Number: Not Specified UUID: 3e45ed98-4c27-4566-8ac0-612cb3e956ba Wake-up Type: Power Switch SKU Number: Not Specified Family: Not Specified Handle 0x2000, DMI type 32, 11 bytes System Boot Information Status: No errors detected

This information is useful for finding online documentation about your hardware or obtaining vendor support.

What’s next?

I’ve listed some command-line utilities that help you to understand the system and hardware where you run your Linux operating system. Some of these utilities are specialized, while dmidecode is generic. You can see all information that it can provide by using dmidecode -t :

$ sudo dmidecode -t dmidecode: option requires an argument -- 't' Type number or keyword expected Valid type keywords are: bios system baseboard chassis processor memory cache connector slot

Other high-level utilities provide detailed information about hardware like hwinfo or GUI tools such as cpu-x . I will cover some of these tools in future articles.

Источник