Linux команда очистки кэша

How do you empty the buffers and cache on a Linux system?

Prior to doing some benchmarking work how would one free up the memory (RAM) that the Linux Kernel is consuming for its buffers and cache? Note that this is mostly useful for benchmarking. Emptying the buffers and cache reduces performance! If you’re here because you thought that freeing buffers and cache was a positive thing, go and read Linux ate my RAM!. The short story: free memory is unused memory is wasted memory.

@innocent-world — never saw these when I was searching, so it appeared to be a hole in the knowledge base on this site, and was attempting to fill it in.

@innocent-world — in looking at those 2 Q’s I think there is still room for this Q&A. This one acts as a canonical Q&A on the site. Those are fairly specific in what they’re addressing. Additionally this one shows information about analyzing the buffers & cache and also how to set the parameters using sudo. Neither of the other 2 questions address any of this.

Please read this article linuxatemyram.com If you understand the risk then you can do free && sync && echo 3 > /proc/sys/vm/drop_caches && free

1 Answer 1

Emptying the buffers cache

If you ever want to empty it you can use this chain of commands.

# free && sync && echo 3 > /proc/sys/vm/drop_caches && free total used free shared buffers cached Mem: 1018916 980832 38084 0 46924 355764 -/+ buffers/cache: 578144 440772 Swap: 2064376 128 2064248 total used free shared buffers cached Mem: 1018916 685008 333908 0 224 108252 -/+ buffers/cache: 576532 442384 Swap: 2064376 128 2064248 

You can signal the Linux Kernel to drop various aspects of cached items by changing the numeric argument to the above command.

# echo 1 > /proc/sys/vm/drop_caches 

# echo 2 > /proc/sys/vm/drop_caches 

# echo 3 > /proc/sys/vm/drop_caches 

The above are meant to be run as root. If you’re trying to do them using sudo then you’ll need to change the syntax slightly to something like these:

$ sudo sh -c 'echo 1 >/proc/sys/vm/drop_caches' $ sudo sh -c 'echo 2 >/proc/sys/vm/drop_caches' $ sudo sh -c 'echo 3 >/proc/sys/vm/drop_caches' 

NOTE: There’s a more esoteric version of the above command if you’re into that:

$ echo "echo 1 > /proc/sys/vm/drop_caches" | sudo sh 

Why the change in syntax? The /bin/echo program is running as root, because of sudo , but the shell that’s redirecting echo’s output to the root-only file is still running as you. Your current shell does the redirection before sudo starts.

Seeing what’s in the buffers and cache

Take a look at linux-ftools if you’d like to analyze the contents of the buffers & cache. Specifically if you’d like to see what files are currently being cached.

fincore

With this tool you can see what files are being cached within a give directory.

fincore [options] files. --pages=false Do not print pages --summarize When comparing multiple files, print a summary report --only-cached Only print stats for files that are actually in cache. 

For example, /var/lib/mysql/blogindex :

root@xxxxxx:/var/lib/mysql/blogindex# fincore --pages=false --summarize --only-cached * stats for CLUSTER_LOG_2010_05_21.MYI: file size=93840384 , total pages=22910 , cached pages=1 , cached size=4096, cached perc=0.004365 stats for CLUSTER_LOG_2010_05_22.MYI: file size=417792 , total pages=102 , cached pages=1 , cached size=4096, cached perc=0.980392 stats for CLUSTER_LOG_2010_05_23.MYI: file size=826368 , total pages=201 , cached pages=1 , cached size=4096, cached perc=0.497512 stats for CLUSTER_LOG_2010_05_24.MYI: file size=192512 , total pages=47 , cached pages=1 , cached size=4096, cached perc=2.127660 stats for CLUSTER_LOG_2010_06_03.MYI: file size=345088 , total pages=84 , cached pages=43 , cached size=176128, cached perc=51.190476 stats for CLUSTER_LOG_2010_06_04.MYD: file size=1478552 , total pages=360 , cached pages=97 , cached size=397312, cached perc=26.944444 stats for CLUSTER_LOG_2010_06_04.MYI: file size=205824 , total pages=50 , cached pages=29 , cached size=118784, cached perc=58.000000 stats for COMMENT_CONTENT_2010_06_03.MYI: file size=100051968 , total pages=24426 , cached pages=10253 , cached size=41996288, cached perc=41.975764 stats for COMMENT_CONTENT_2010_06_04.MYD: file size=716369644 , total pages=174894 , cached pages=79821 , cached size=326946816, cached perc=45.639645 stats for COMMENT_CONTENT_2010_06_04.MYI: file size=56832000 , total pages=13875 , cached pages=5365 , cached size=21975040, cached perc=38.666667 stats for FEED_CONTENT_2010_06_03.MYI: file size=1001518080 , total pages=244511 , cached pages=98975 , cached size=405401600, cached perc=40.478751 stats for FEED_CONTENT_2010_06_04.MYD: file size=9206385684 , total pages=2247652 , cached pages=1018661 , cached size=4172435456, cached perc=45.321117 stats for FEED_CONTENT_2010_06_04.MYI: file size=638005248 , total pages=155763 , cached pages=52912 , cached size=216727552, cached perc=33.969556 stats for FEED_CONTENT_2010_06_04.frm: file size=9840 , total pages=2 , cached pages=3 , cached size=12288, cached perc=150.000000 stats for PERMALINK_CONTENT_2010_06_03.MYI: file size=1035290624 , total pages=252756 , cached pages=108563 , cached size=444674048, cached perc=42.951700 stats for PERMALINK_CONTENT_2010_06_04.MYD: file size=55619712720 , total pages=13579031 , cached pages=6590322 , cached size=26993958912, cached perc=48.533080 stats for PERMALINK_CONTENT_2010_06_04.MYI: file size=659397632 , total pages=160985 , cached pages=54304 , cached size=222429184, cached perc=33.732335 stats for PERMALINK_CONTENT_2010_06_04.frm: file size=10156 , total pages=2 , cached pages=3 , cached size=12288, cached perc=150.000000 --- total cached size: 32847278080 

With the above output you can see that there are several *.MYD, *.MYI, and *.frm files that are currently being cached.

Swap

If you want to clear out your swap you can use the following commands.

$ free total used free shared buffers cached Mem: 7987492 7298164 689328 0 30416 457936 -/+ buffers/cache: 6809812 1177680 Swap: 5963772 609452 5354320 

Then use this command to disable swap:

You can confirm that it’s now empty:

$ free total used free shared buffers cached Mem: 7987492 7777912 209580 0 39332 489864 -/+ buffers/cache: 7248716 738776 Swap: 0 0 0 

And now reconfirm with free :

$ free total used free shared buffers cached Mem: 7987492 7785572 201920 0 41556 491508 -/+ buffers/cache: 7252508 734984 Swap: 5963772 0 5963772 

Источник

How to Clear RAM Memory Cache, Buffer and Swap Space on Linux

Like any other operating system, GNU/Linux has implemented memory management efficiently and even more than that. But if any process is eating away your memory and you want to clear it, Linux provides a way to flush or clear ram cache.

How to Clear Cache in Linux?

Every Linux System has three options to clear cache without interrupting any processes or services.

1. Clear PageCache only.

# sync; echo 1 > /proc/sys/vm/drop_caches

2. Clear dentries and inodes.

# sync; echo 2 > /proc/sys/vm/drop_caches

3. Clear pagecache, dentries, and inodes.

# sync; echo 3 > /proc/sys/vm/drop_caches

Explanation of the above command.

sync will flush the file system buffer. Command Separated by “;” run sequentially. The shell waits for each command to terminate before executing the next command in the sequence. As mentioned in the kernel documentation, writing to drop_cache will clean cache without killing any application/service, command echo is doing the job of writing to file.

If you have to clear the disk cache, the first command is safest in enterprise and production as “. echo 1 > ….” will clear the PageCache only. It is not recommended to use the third option above “. echo 3 >” in production until you know what you are doing, as it will clear pagecache, dentries, and inodes.

Is it a good idea to free Buffer and Cache in Linux that might be used by Linux Kernel?

Free Buffer and Cache in Linux

When you are applying various settings and want to check, if it is actually implemented specially on the I/O-extensive benchmark, then you may need to clear the buffer cache. You can drop cache as explained above without rebooting the System i.e., no downtime required.

Linux is designed in such a way that it looks into the disk cache before looking onto the disk. If it finds the resource in the cache, then the request doesn’t reach the disk. If we clean the cache, the disk cache will be less useful as the OS will look for the resource on the disk.

Moreover, it will also slow the system for a few seconds while the cache is cleaned and every resource required by OS is loaded again in the disk cache.

Now we will be creating a shell script to auto clear RAM cache daily at 2 am via a cron scheduler task. Create a shell script clearcache.sh and add the following lines.

#!/bin/bash # Note, we are using "echo 3", but it is not recommended in production instead use "echo 1" echo "echo 3 > /proc/sys/vm/drop_caches"

Set execute permission on the clearcache.sh file.

Now you may call the script whenever you are required to clear the ram cache.

Now set a cron to clear RAM cache every day at 2 am. Open crontab for editing.

Append the below line, save and exit to run it at 2 am daily.

0 2 * * * /path/to/clearcache.sh

For more details on how to cron a job, you may like to check our article on 11 Cron Scheduling Jobs.

Is it a good idea to auto clear the RAM cache on the production server?

Clear RAM Cache on Linux Production Server?

No! it is not. Think of a situation when you have scheduled the script to clear ram cache every day at 2 am. Every day at 2 am the script is executed and it flushes your RAM cache. One day for whatsoever reason may be more than expected users are online on your website and seeking resources from your server.

At the same time, the scheduled script runs and clears everything in the cache. Now all the users are fetching data from the disk. It will result in a server crash and corrupt the database. So clear ram-cache only when required, and known your footsteps, else you are a Cargo Cult System Administrator.

How to Clear Swap Space in Linux?

If you want to clear Swap space, you may like to run the below command.

Also, you may add the above command to a cron script above, after understanding all the associated risks.

Now we will be combining both above commands into one single command to make a proper script to clear RAM Cache and Swap Space.

# echo 3 > /proc/sys/vm/drop_caches && swapoff -a && swapon -a && printf '\n%s\n' 'Ram-cache and Swap Cleared' OR $ su -c "echo 3 >'/proc/sys/vm/drop_caches' && swapoff -a && swapon -a && printf '\n%s\n' 'Ram-cache and Swap Cleared'" root

After testing both the above commands, we will run the command “free -h” before and after running the script and will check the cache.

That’s all for now, if you liked the article, don’t forget to provide us with your valuable feedback in the comments to let us know, what you think is a good idea to clear ram cache and buffer in production and Enterprise?

Источник