Linux Mint Forums
Forum rules
Before you post please read how to get help. Topics in this forum are automatically closed 6 months after creation.
HDMI monitor not detected
Post by weblike » Tue Jul 17, 2018 3:57 am
I have installed Linux mint 19 on my laptop a week ago and used it at my office with 1 HDMI monitor (worked fine). At home I have used it with 2 aditional monitors: 1 VGA and 1 HDMI.
1. Last evening I wanted to work just on my laptop, opened a the browser, but the window run outside the desktop like the system detected a second monitor (I mention again that I did not had any second monitor attached). Went to «Displays» ->I saw a VGA monitor and disabled it -> from than I could work only on my laptop.
2. Today came back to office-> attached the HDMI monitor, but the laptop did not detected it. Few restarts, but doesn’t want to detect the HDMI anymore.
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
ClixTrix Level 6
Posts: 1069 Joined: Wed Dec 09, 2015 11:40 am Location: Columbus, Ohio, USA
Re: HDMI monitor not detected
Post by ClixTrix » Tue Jul 17, 2018 7:57 am
The first case, where the VGA was active but not connected, I’m guessing you returned the Laptop from Sleep or Hibernate when the VGA was present before it went into sleep or hibernate state. Is that the possible explanation for that case?
The second case might be tied to a problem with the HDMI port, or cable, or monitor. If you use the Display utility in Menu-Preferences and select the «Detect Displays» button, does that refresh and bring back the HDMI. Do you use the home HDMI monitor for any other purposes?
Linux Mint 19.2 x64 Cinnamon 4.15.0-118-generic
Gigabyte GA-AB350M-D3H (F20) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 2x8GB / Sapphire Radeon HD6450
NVMe-SSD: Samsung 960 EVO 250GB / SATA-SSD: Samsung 850 EVO 250GB + Toshiba OCZ VX500 512GB
Re: HDMI monitor not detected
Post by weblike » Tue Jul 17, 2018 8:05 am
1. Work at work with HDMI monitor. -> all OK. Shut down the laptop normally
2. Go home and work just on laptop-> when opened the browser ->the browser opened like was a second monitor active (outside the laptop monitor) -> So opened Displays and saw a seconf VGA monitor (I disabled it) -> the browser opened OK on laptop’s monitor.
Shutdown the laptop corectly
3. In morning I’ve came to the office and before powering on-> connected the HDMI monitor -> powering on the laptop -> no HDMI
4. Opened Displays -> clicked «Detect monitors» but no detection.
ClixTrix Level 6
Posts: 1069 Joined: Wed Dec 09, 2015 11:40 am Location: Columbus, Ohio, USA
Re: HDMI monitor not detected
Post by ClixTrix » Tue Jul 17, 2018 8:11 am
I’d also like you to run the following command in Terminal while connected to the problem HDMI monitor (not detected) and post back the results.
Linux Mint 19.2 x64 Cinnamon 4.15.0-118-generic
Gigabyte GA-AB350M-D3H (F20) / Ryzen 5 1600 / Micron Ballistix Sport DDR4 2400 2x8GB / Sapphire Radeon HD6450
NVMe-SSD: Samsung 960 EVO 250GB / SATA-SSD: Samsung 850 EVO 250GB + Toshiba OCZ VX500 512GB
Re: HDMI monitor not detected
Post by weblike » Tue Jul 17, 2018 10:18 am
Arrived home where I have 2 monitors: 1VGA, 1HDMI
plugged in both and guess what, both are working. without doing anything
I’m curious when I go back to the office if is connecting there.
Re: HDMI monitor not detected
Post by weblike » Fri Jul 20, 2018 2:25 am
Arrived at the office ->where I have only 1 monitor and there is not connecting.
I changed the HDMI cable & monitor and no result.
inxi -Fxz System: Host: XXXXX-K75VJ Kernel: 4.15.0-24-generic x86_64 bits: 64 gcc: 7.3.0 Desktop: Cinnamon 3.8.7 (Gtk 3.22.30-1ubuntu1) Distro: Linux Mint 19 Tara Machine: Device: laptop System: ASUSTeK product: K75VJ v: 1.0 serial: N/A Mobo: ASUSTeK model: K75VJ v: 1.0 serial: N/A BIOS: American Megatrends v: 234 date: 11/25/2014 Battery BAT1: charge: 23.1 Wh 80.3% condition: 28.7/50.8 Wh (57%) model: COMPAL PABAS0241231 status: Discharging hidpp__1: charge: N/A condition: NA/NA Wh model: Logitech Wireless Keyboard K360 status: Discharging CPU: Quad core Intel Core i7-3630QM (-MT-MCP-) arch: Ivy Bridge rev.9 cache: 6144 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 19154 clock speeds: max: 3400 MHz 1: 1236 MHz 2: 1286 MHz 3: 1385 MHz 4: 1276 MHz 5: 1376 MHz 6: 1480 MHz 7: 1232 MHz 8: 1278 MHz Graphics: Card-1: Intel 3rd Gen Core processor Graphics Controller bus-ID: 00:02.0 Card-2: NVIDIA GF108M [GeForce GT 635M] bus-ID: 01:00.0 Display Server: x11 (X.Org 1.19.6 ) drivers: modesetting,nvidia (unloaded: fbdev,vesa,nouveau) Resolution: 1600x900@60.00hz OpenGL: renderer: GeForce GT 635M/PCIe/SSE2 version: 4.6.0 NVIDIA 390.48 Direct Render: Yes Audio: Card Intel 7 Series/C216 Family High Def. Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0 Sound: Advanced Linux Sound Architecture v: k4.15.0-24-generic Network: Card-1: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller driver: r8169 v: 2.3LK-NAPI port: d000 bus-ID: 02:00.0 IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: Card-2: Qualcomm Atheros AR9485 Wireless Network Adapter driver: ath9k bus-ID: 03:00.0 IF: wlp3s0 state: down mac: Drives: HDD Total Size: 1000.2GB (71.6% used) ID-1: /dev/sda model: Samsung_SSD_860 size: 250.1GB ID-2: /dev/sdb model: ST750LM022_HN size: 750.2GB Partition: ID-1: / size: 229G used: 38G (18%) fs: ext4 dev: /dev/sda1 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: System Temperatures: cpu: 57.0C mobo: 27.8C gpu: 0.0:51C Fan Speeds (in rpm): cpu: N/A Info: Processes: 289 Uptime: 9 min Memory: 1952.8/15919.8MB Init: systemd runlevel: 5 Gcc sys: 7.3.0 Client: Shell (zsh 5.4.2) inxi: 2.3.56 grep HDMI /var/log/Xorg.0.log [ 7.517] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event17) Linux mint hdmi драйвер
Добрый день. Решил подключить второй монитор к ноутбуку Lenovo Ideapad S340-14IWL с процессором Intel Pentium Gold 5405U. Стоит LM Cinammon x64 последней версии.
System: Kernel: 5.4.0-48-generic x86_64 bits: 64 compiler: gcc v: 9.3.0
Desktop: Cinnamon 4.6.7 Distro: Linux Mint 20 Ulyana base: Ubuntu 20.04 focal
Machine: Type: Laptop System: LENOVO product: 81N7 v: Lenovo IdeaPad S340-14IWL
serial:
Mobo: LENOVO model: LNVNB161216 v: No DPK serial: UEFI: LENOVO
v: ALCN28WW(V2.05) date: 11/25/2019
Battery: ID-1: BAT1 charge: 25.6 Wh condition: 51.7/52.5 Wh (98%)
model: 74726570786C6543 374650334338314C status: Charging
CPU: Topology: Dual Core model: Intel Pentium 5405U bits: 64 type: MT MCP arch: Kaby Lake
rev: C L2 cache: 2048 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 18399
Speed: 800 MHz min/max: 400/2300 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800
Graphics: Device-1: Intel vendor: Lenovo driver: i915 v: kernel bus ID: 00:02.0
Display: x11 server: X.Org 1.20.8 driver: modesetting unloaded: fbdev,vesa
resolution: 1920×1080~60Hz
OpenGL: renderer: Mesa Intel UHD Graphics 610 (WHL GT1) v: 4.6 Mesa 20.0.8
direct render: Yes
Audio: Device-1: Intel Cannon Point-LP High Definition Audio vendor: Lenovo
driver: snd_hda_intel v: kernel bus ID: 00:1f.3
Sound Server: ALSA v: k5.4.0-48-generic
Network: Device-1: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter vendor: Lenovo
driver: ath10k_pci v: kernel port: 3040 bus ID: 02:00.0
IF: wlp2s0 state: up mac:
Device-2: Qualcomm Atheros type: USB driver: btusb bus ID: 1-10:4
Drives: Local Storage: total: 119.24 GiB used: 114.91 GiB (96.4%)
ID-1: /dev/nvme0n1 vendor: Lenovo O.E.M. model: RPFTJ128PDD2EWX size: 119.24 GiB
Partition: ID-1: / size: 36.42 GiB used: 16.68 GiB (45.8%) fs: ext4 dev: /dev/nvme0n1p2
ID-2: /home size: 79.73 GiB used: 49.11 GiB (61.6%) fs: ext4 dev: /dev/nvme0n1p3
Sensors: System Temperatures: cpu: 39.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info: Processes: 222 Uptime: 33m Memory: 7.50 GiB used: 1.58 GiB (21.1%) Init: systemd
runlevel: 5 Compilers: gcc: 9.3.0 Shell: bash v: 5.0.17 inxi: 3.0.38
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
eDP-1 connected primary 1920×1080+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
1920×1080 60.01*+ 60.01 59.97 59.96 59.93
1680×1050 59.95 59.88
1600×1024 60.17
1400×1050 59.98
1600×900 59.99 59.94 59.95 59.82
1280×1024 60.02
1440×900 59.89
1400×900 59.96 59.88
1280×960 60.00
1440×810 60.00 59.97
1368×768 59.88 59.85
1360×768 59.80 59.96
1280×800 59.99 59.97 59.81 59.91
1152×864 60.00
1280×720 60.00 59.99 59.86 59.74
1024×768 60.04 60.00
960×720 60.00
928×696 60.05
896×672 60.01
1024×576 59.95 59.96 59.90 59.82
960×600 59.93 60.00
960×540 59.96 59.99 59.63 59.82
800×600 60.00 60.32 56.25
840×525 60.01 59.88
864×486 59.92 59.57
800×512 60.17
700×525 59.98
800×450 59.95 59.82
640×512 60.02
720×450 59.89
700×450 59.96 59.88
640×480 60.00 59.94
720×405 59.51 58.99
684×384 59.88 59.85
680×384 59.80 59.96
640×400 59.88 59.98
576×432 60.06
640×360 59.86 59.83 59.84 59.32
512×384 60.00
512×288 60.00 59.92
480×270 59.63 59.82
400×300 60.32 56.34
432×243 59.92 59.57
320×240 60.05
360×202 59.51 59.13
320×180 59.84 59.32
DP-1 disconnected (normal left inverted right x axis y axis)
Как видно xrandr не отображается HDMI порт, есть только DP-1, что это я так и не понял. Разъем под вывод видео только HDMI, других нет. Перелопатил интернет, решения не нашел. Проверил три кабеля, все три рабочие, но с ноутбуком не пашут. Вывод на мониторе правильный, все доступные настройки монитора проверил. Прошу помощи в решении данного вопроса.