Linux openjdk java home

How to set JAVA_HOME for Java?

You can set your JAVA_HOME in /etc/profile as Petronilla Escarabajo suggests. But the preferred location for JAVA_HOME or any system variable is /etc/environment .

Open /etc/environment in any text editor like nano or gedit and add the following line:

JAVA_HOME="/usr/lib/jvm/open-jdk" 

(java path could be different)

Use source to load the variables, by running this command:

Then check the variable, by running this command:

Usually most linux systems source /etc/environment by default. If your system doesn’t do that add the following line to ~/.bashrc (Thanks @pje)

When i tried to run Android Studio (that has IntelliJ IDEA as a base), i had an error message very similar to @advocate’s: «‘tools.jar’ seems to be not in Android Studio classpath.» After fiddling a lot with JAVA_HOME without success, i decided to take a look at studio.sh, the shellscript that starts Android Studio. As a wild guess, i set JDK_HOME to the same value expected for JAVA_HOME, and voila! It installed without great problems.

For those doing software development, don’t put your JAVA_HOME in /etc/environment unless you want to reboot everytime you switch JDK versions.

This is a temporary solution, as others pointed out. No one would want to run source every time they restart their bash.

As others have pointed out, this doesn’t stick between terminal sessions. What I did to address this is just added the line source /etc/environment to the top of my bash config file ~/.bashrc so that it loads all my environment settings on startup. Working for me so far.

Источник

How to Set JAVA_HOME Variable in Ubuntu Linux Correctly

If you are running Java programs on Ubuntu using Eclipse, Maven or Netbeans etc, you’ll need to set JAVA_HOME to your path. Otherwise, your system will complain that “java_home environment variable is not set”.

In this beginner’s tutorial, I’ll show the steps to correctly set Java Home variable on Ubuntu. The steps should be valid for most other Linux distributions as well.

The process consists of these steps:

• Making sure Java Development Kit (JDK) is installed.
• Finding the correct location of JDK executable.
• Setting the JAVA_HOME variable and making the change permanent.

Step 1: Check if JDK is installed

The simplest way to check if Java Development Kit (JDK) is installed on your Linux system is by running this command:

The above command checks the version of Java compiler. If it is installed, it will show the Java version.

If the command shows an error like javac command not found, you’ll have to install JDK.

If Java Compiler is not installed on your system, install Java Development Kit using this command:

sudo apt install default-jdk

This will install the default Java version in your current Ubuntu version. If you need some other specific Java version, you’ll have to specify it while installing Java on Ubuntu.

Once you have made sure that Java Compiler is present on your system, it’s time to find its location.

Step 2: Get the location of JDK executable (Java Compiler)

The executable is usually located in the /usr/lib/jvm directory. I won’t left you on your own for a guessing game. Instead, let’s find out the path of the Java executable.

Use the which command to get the location of Java Compiler executable:

The problem here is that the location it gives is actually a symbolic link. You’ll have to follow it a couple of times:

And when you find a path like /usr/lib/jvm/java-11-openjdk-amd64/bin/javac, you remove the /bin/javac from it to get something like /usr/lib/jvm/java-11-openjdk-amd64

An easier method is to follow the symbolic link and get to the actual executable file directly using this command:

readlink -f `which javac` | sed "s:/bin/javac::"

The readlink command follows a symbolic link. I have used ` around which java. This is called command substitution and it replaces the command with its output. Sed is then used to replace /bin/javac by nothing and thus removing it altogether.

In my example, the location of the executable file is /usr/lib/jvm/java-11-openjdk-amd64. It could be different for you. Copy the correct path you got from the above command in your system. You know, you can copy paste in the Ubuntu terminal.

Step 3: Setting JAVA_HOME variable

Now that you have got the location, use it to set the JAVA_HOME environment variable:

export JAVA_HOME=/usr/lib/jvm/java-11-openjdk-amd64/bin/java

Check the value of JAVA_HOME directory:

Try to run your program or project in the SAME TERMINAL and see if it works.

This is not over yet. The JAVA_HOME variable you just declared is temporary. If you close the terminal or start a new session, it will be empty again.

To set JAVA_HOME variable ‘permanently’, you should add it to the bashrc file in your home directory.

You can use the Nano editor for editing files in the Linux terminal. If you do not want that and take a simple copy-paste approach, use the following commands:

Back up your bashrc file (in case you mess it, you can get it back):

Next, use the echo command to append the export command you used at the beginning of this section. Change the command below to use the correct path as displayed by your system in.

echo "export JAVA_HOME=/usr/lib/jvm/java-11-openjdk-amd64" >> ~/.bashrc

Verify that it has been correctly added to the end of the file:

The above tail command will show the last 3 lines of the specified file.

Here’s the entire output of the above three commands.

Now, even if you exit the session or restart the system, the JAVA_HOME variable will still be set to the value you specified. That’s what you want, right?

Do note that if you change the default Java version in the future, you’ll have to change the value of JAVA_HOME and point it to the correct executable path.

I hope this tutorial not only helped you to set Java Home, it also taught you how you are doing it.

If you are still facing issues or have any questions or suggestions, please let me know in the comments.

Источник

How to Set JAVA_HOME Path in Ubuntu 20.04 and Ubuntu 22.04

Many Java-based programs require the Java Runtime Environment (JRE) to run smoothly regardless of the operating system. For development, most IDEs like Eclipse and NetBeans require the Java Development Kit (JDK) on your computer. Whether you’re a newbie who wants to learn how to develop or an application you have installed requires a Java installation on your system, we’ve got you covered. Setting up the JAVA_HOME path is quite simple.

In this tutorial, we will learn how to install the JDK on Ubuntu 20.04 and Ubuntu 22.04 and set up the Java_HOME path. Let’s start with the installation of the JDK.

Install OpenJDK on Ubuntu

Note: Make sure that you have updated the Advanced Package Tool (APT) before you move forward to install OpenJDK.

Press Ctrl + Alt + T to open the terminal and enter the following command mentioned in the box. You can either install OpenJDK 8 or the newer versions OpenJDK 11 to OpenJDK 18. Not all versions are available on any Ubuntu version, you can check for available versions with the command:

Install OpenJDK 8

sudo apt install openjdk-8-jdk

Install OpenJDK 11

sudo apt install openjdk-11-jdk

Install OpenJDK 14

sudo apt install openjdk-14-jdk

Install OpenJDK 16

sudo apt install openjdk-16-jdk

Install OpenJDK 17

sudo apt install openjdk-17-jdk

Install OpenJDK 18

sudo apt install openjdk-18-jdk

You will be prompted to enter your sudo password to continue with the installation.

Once you’ve entered that, wait for the system to finish the installation and then move on to step 2.

Set JAVA_HOME Path

All you have to do now is to set the “JAVA_HOME” and “PATH” environment variables and then you are done. Enter the following commands to set your environment variables. Make sure that your environment variables point to a valid installation of JDK on your machine. For Ubuntu 18.04, the path is /usr/lib/jvm/java-8-openjdk-amd64/

export JAVA_HOME=/usr/lib/jvm/java-8-openjdk-amd64

To check whether your JAVA_HOME path has been successfully saved, enter the following command to check.

The value stored in the JAVA_HOME variable will be displayed on the terminal as you can see in the screenshot

Add JAVA bin directory to the PATH variable

Like we have added JAVA_HOME path, we will now update the PATH variable as well. To do that, enter the following command on the terminal.

export PATH=$PATH:$JAVA_HOME/bin

This will append the java bin directory to the existing PATH variable. You can also check the PATH variable by entering the following command

Test JAVA setup

You have successfully installed OpenJDK on your machine. You can verify your installation by entering the following command on your terminal.

Through this simple tutorial, you have now configured the JAVA_HOME variable in your operating system. You can now easily run java based applications as well as development environments on your machine.

Search

About This Site

Vitux.com aims to become a Linux compendium with lots of unique and up to date tutorials.

Latest Tutorials

Источник