Linux полный размер папки

How to get the summarized sizes of directories and their subdirectories?

Let’s say I want to get the size of each directory of a Linux file system. When I use ls -la I don’t really get the summarized size of the folders. If I use df I get the size of each mounted file system but that also doesn’t help me. And with du I get the size of each subdirectory and the summary of the whole file system. But I want to have only the summarized size of each directory within the ROOT folder of the file system. Is there any command to achieve that?

The —total flag was helpful for me. E.g. du -sh —total applications/* . askubuntu.com/a/465436/48214

9 Answers 9

This does what you’re looking for:

• -s to give only the total for each command line argument.
• -h for human-readable suffixes like M for megabytes and G for gigabytes (optional).
• /* simply expands to all directories (and files) in / . Note: dotfiles are not included; run shopt -s dotglob to include those too.

Also useful is sorting by size:

If you have dot-directories in the root directory, you can use shopt -s dotglob to include them in the count.

It’s very usefull, because it’s simple and you can place what path you want instead of /* , e.g. ./ for current directory or ./* for each item in current directory.

@c1phr If your sort doesn’t have -h , you need to leave it off from du as well, otherwise the sorting will mix up kilo/mega/gigabytes. du -s /* | sort -nr .

I often need to find the biggest directories, so to get a sorted list containing the 20 biggest dirs I do this:

du -m /some/path | sort -nr | head -n 20 

In this case the sizes will be reported in megabytes.

@Xedecima the problem with using h is the sort doesn’t know how to handle different sizes. For example 268K is sorted higher than 255M, and both are sorted higher than 2.7G

The -h (human readable) argument on the ‘sort’ command should properly read these values. Just like du’s -h flag exports them. Depending on what you’re running I’m guessing.

I like to use Ncdu for that, you can use the cursor to navigate and drill down through the directory structure it works really well.

The existing answers are very helpful, maybe some beginner (like me) will find this helpful as well.

Very basic loop, but for me this was a good start for some other size related operations:

for each in $(ls) ; do du -hs "$each" ; done 

The following du invocation should work on BSD systems:

Right portable option combination on BSD/*NIX is du -sk /* . I hate the -k stuff soooo much. Linux’ -h totally rocks.

This isn’t easy. The du command either shows files and folders (default) or just the sizes of all items which you specify on the command line (option -s ).

To get the largest items (files and folders), sorted, with human readable sizes on Linux:

This will bury you in a ton of small files. You can get rid of them with —threshold (1 MB in my example):

The advantage of this command is that it includes hidden dot folders (folders which start with . ).

If you really just want the folders, you need to use find but this can be very, very slow since du will have to scan many folders several times:

find . -type d -print0 | sort -z | xargs --null -I '<>' du -sh '<>' | sort -h 

@podarok It’s available on OpenSUSE 13.2 Linux. Try to find a more recent version of your distribution or compile a more recent version of the package yourself.

Caching might have been a bad term. I was thinking of something like done in this port superuser.com/a/597173/121352 where we scan the disks contents once into a mapping and then continue using data from that mapping rather than hitting the disk again.

You might also want to check out xdiskusage. Will give you the same information, but shown graphically, plus allows to drill down (very useful). There are other similar utilities for KDE and even Windows.

Be aware, that you can’t compare directories with du on different systems/machines without getting sure, both share the same blocksize of the filesystem. This might count if you rsync some files from a linux machine to a nas and you want to compare the synced directory on your own. You might get different results with du because of different blocksizes.

You could use ls in conjunction with awk :

The output of ls is piped to awk . awk starts processing the data. Standard delimiter is space. The sum variable tot is initialised to zero; the following statement is executed for each row/line outputted by ls . It merely increments tot with the size. $5 stands for fifth column (outputted by ls ). At the end we divide by (1024*1024) to sum in megabytes.

If you would convert this into a script or function (.bashrc) you can also use it to get the size of certain subsets of directories, according to filetypes.

If you want system wide information, kdirstat may came in handy!

Источник

Как посмотреть размер папки в Linux

Посмотреть занимаемое место конкретной директории на диске Linux получится через любой файловый менеджер. Достаточно открыть свойства файла. Но там информация отображается в кратком виде, а нередко нужны подробности. С помощью утилиты ls получить детальные сведения не получится. А вот утилита du для этих целей подойдет отлично.

В данной статье мы расскажем, как посмотреть размер папки в Linux с помощью du. Для этого разберем два примера ее использования.

Как посмотреть размер папки в Linux

Сначала мы опишем, как получить информацию об определенной папке, с учетом или без учета ее вложений. А потом перейдем к подпапкам в конкретном каталоге. Заодно упомянем несколько полезных нюансов работы с du, например, возможность сортировки данных.

1. Определённая папка

В качестве примера возьмем папку Downloads. Команда для вывода ее размера выглядит следующим образом:

sudo du -sh /home/root-user/Downloads

В результате выведется её занимаемое место на диске:

Второй полезный сценарий использования утилиты du заключается в выводе размера всех вложенных папок в определенной директории, без учета файлов внутри. Опять в качестве примера возьмем директорию Downloads. Вот нужная нам команда:

sudo du -h /home/root-user/Downloads

Выводы

В статье мы вкратце рассказали о том, как посмотреть размер папки в Linux и ее вложений с помощью утилиты du. Заодно упомянули возможность сортировки и другие важные нюансы. А если вам интересны еще сценарии использования du в терминале Linux, то ознакомьтесь с данной статьей. Там подробно разобран ее синтаксис, доступные опции и конкретные примеры.

Обнаружили ошибку в тексте? Сообщите мне об этом. Выделите текст с ошибкой и нажмите Ctrl+Enter.

Источник

How to Get the Size of a Directory in Linux

Many users run Linux from the command line. However, the command line — sometimes known as the terminal — doesn’t have an intuitive interface for checking disk space in Linux.

This guide shows you how to find the size of a specific directory in Linux from the command line.

• A system running Linux
• A command line / terminal window (available by clicking Search, then typing terminal)
• A user account with sudo or root privileges

Note: In Linux, a directory is the equivalent of a folder in Windows. A directory may have directories inside (called subdirectories), or it may only contain files.

Option 1: Display the Size of a Directory Using the du Command

The du command stands for disk usage. This command is included by default in most Linux distributions.

You can display the size of your current directory by typing du in the command line:

The system should display a list of the contents of your home directory, with a number to the left. That number is the size of the object in kilobytes.

You can add the -h option to make the output more readable:

Each entry will start with a number and a letter. The number is the amount of space used, and the letter (usually K, M, or G) indicates Kilobytes, Megabytes, or Gigabytes. For example:

400K – 400 kilobytes 7.3M – 7.3 megabytes 2.2G – 2.2 gigabytes

To find the size of a specific directory different from your current working directory. The du command allows you to specify a directory to examine:

This displays the size of the contents of the /var directory. You may see some entries with an error, as in the image below.

This happens when your user account does not have permission to access a particular directory. Use the sudo or su command to get access privileges:

Note: Some versions of Linux don’t enable sudo by default. You can use the su command to switch to the root user account instead.

To display total disk usage of a particular directory, use the -c command:

Options can be combined. If you wanted to repeat the previous command in human-readable format, enter the following:

You can limit the scan to a certain level of subdirectory by using the max-depth option. For example, to scan only the size of the top directory, use —max-depth=0 :

If you wanted to list only the top directory and the first layer of subdirectories, change —max-depth=1 :

If you run into trouble or want to explore more options for the du command, enter the following command to display the help file:

Option 2: Get Size of Directory in Linux Using tree Command

By default, the tree command is not included in some versions of Linux. To install it, enter the following:

The tree command displays a visual representation of your directories. It uses lines to indicate which subdirectories belong where, and it uses colors to indicate directories and files.

tree can also be used with options. To display a human-readable size of the current directory’s subdirectories, enter the following:

Like the du command, tree can target a specific directory:

This command takes a few moments since the /var directory has many entries.

The tree command also has a help file, which you can access by entering:

Option 3: Find the Size of a Linux Directory Using ncdu Command

The ncdu tool stands for NCurses Disk Usage. Like the tree command, it is not installed by default on some versions of Linux. To install it, enter the following:

The ncdu utility is an interactive display of your disk usage. For example, enter the following:

In the upper left corner, it displays the current directory being scanned. A column on the left displays the numerical size, a graph of #- signs to indicate the relative size, and the file or directory.

Use the up and down arrows to select different lines. The right arrow will browse into a directory, and the left arrow will take you back.

ncdu can be used to target a specific directory, for example:

For help, press the ? key inside the ncdu interface. To quit, press the letter q .

Note: Learn how to move directories in Linux using the GUI or system commands.

You now have three different options to find the size of a directory in Linux operating systems.

If you want to learn more about directories in Linux, read our article how to rename directories in Linux.

Источник