Linux right to execute

Setting Read/Write/Execute Permissions in Linux

The Read/write/execute permissions is in the form of User/Group/Others.

If you want to remove the permissions you can issue the command:

That will take away all the permissions from the testfile.

If you want to have only the User (the owner of the file) have access you can issue:

After removing all the permissions now the only permissions on the file would be (w)rite, (r)ead, e(x)ecute by the owner of the file.

You could add the group full access to the file with:

You can also give everyone full access to the file by issuing:

Notice in the commands there is either a minus «-» or a plus «+». The minus removes the specific permission the plus adds the permission.

You can get more details of the usage by issuing at the command prompt:

You can check the permissions of the file with the «ls -l» command:

The argument of ls is specifying the long output.

Thanks much! I was thinking that you can set permissions to a user first and then change it’s ownership to that user but this will do just as well

Actually you can set the user or group in any order. The final permissions will be what you end up with. If the initial owner is john and you set where only john has access, that’s the way it will be. If you change the owner to paul, then only paul will have access if the permission is user only. As you test the options the way you have described, you’ll notice lots of flexibility and variations of the command.

Источник

File Permissions in Linux / Unix: How to Read, Write & Change?

Linux is a clone of UNIX, the multi-user operating system which can be accessed by many users simultaneously. Linux can also be used in mainframes and servers without any modifications. But this raises security concerns as an unsolicited or malign user can corrupt, change or remove crucial data. For effective security, Linux divides authorization into 2 levels.

In this Linux file commands tutorial, you will learn-

The concept of Linux File permission and ownership is crucial in Linux. Here, we will explain Linux permissions and ownership and will discuss both of them. Let us start with the Ownership.

Click here if the video is not accessible

Linux File Ownership

Every file and directory on your Unix/Linux system is assigned 3 types of owner, given below.

User

A user is the owner of the file. By default, the person who created a file becomes its owner. Hence, a user is also sometimes called an owner.

Group

A user- group can contain multiple users. All users belonging to a group will have the same Linux group permissions access to the file. Suppose you have a project where a number of people require access to a file. Instead of manually assigning permissions to each user, you could add all users to a group, and assign group permission to file such that only this group members and no one else can read or modify the files.

Other

Any other user who has access to a file. This person has neither created the file, nor he belongs to a usergroup who could own the file. Practically, it means everybody else. Hence, when you set the permission for others, it is also referred as set permissions for the world.

Now, the big question arises how does Linux distinguish between these three user types so that a user ‘A’ cannot affect a file which contains some other user ‘B’s’ vital information/data. It is like you do not want your colleague, who works on your Linux computer, to view your images. This is where Permissions set in, and they define user behavior.

Let us understand the Permission system on Linux.

Linux File Permissions

Every file and directory in your UNIX/Linux system has following 3 permissions defined for all the 3 owners discussed above.

• Read: This permission give you the authority to open and read a file. Read permission on a directory gives you the ability to lists its content.
• Write: The write permission gives you the authority to modify the contents of a file. The write permission on a directory gives you the authority to add, remove and rename files stored in the directory. Consider a scenario where you have to write permission on file but do not have write permission on the directory where the file is stored. You will be able to modify the file contents. But you will not be able to rename, move or remove the file from the directory.
• Execute: In Windows, an executable program usually has an extension “.exe” and which you can easily run. In Unix/Linux, you cannot run a program unless the execute permission is set. If the execute permission is not set, you might still be able to see/modify the program code(provided read & write permissions are set), but not run it.

Let’s see file permissions in Linux with examples:

ls – l on terminal gives

Here, we have highlighted ‘-rw-rw-r–‘and this weird looking code is the one that tells us about the Unix permissions given to the owner, user group and the world.

Here, the first ‘–‘ implies that we have selected a file.p>

Else, if it were a directory, d would have been shown.

The characters are pretty easy to remember.

r = read permission
w = write permission
x = execute permission
– = no permission

Let us look at it this way.

The first part of the code is ‘rw-‘. This suggests that the owner ‘Home’ can:

• Read the file
• Write or edit the file
• He cannot execute the file since the execute bit is set to ‘-‘.

By design, many Linux distributions like Fedora, CentOS, Ubuntu, etc. will add users to a group of the same group name as the user name. Thus, a user ‘tom’ is added to a group named ‘tom’.

The second part is ‘rw-‘. It for the user group ‘Home’ and group-members can:

The third part is for the world which means any user. It says ‘r–‘. This means the user can only:

Changing file/directory permissions in Linux Using ‘chmod’ command

Say you do not want your colleague to see your personal images. This can be achieved by changing file permissions.

We can use the ‘chmod’ command which stands for ‘change mode’. Using the command, we can set permissions (read, write, execute) on a file/directory for the owner, group and the world.

chmod permissions filename

There are 2 ways to use the command –

Absolute(Numeric) Mode in Linux

In this mode, file permissions are not represented as characters but a three-digit octal number.

The table below gives numbers for all for permissions types.

Number	Permission Type	Symbol
0	No Permission	—
1	Execute	–x
2	Write	-w-
3	Execute + Write	-wx
4	Read	r–
5	Read + Execute	r-x
6	Read +Write	rw-
7	Read + Write +Execute	rwx

Let’s see the chmod permissions command in action.

In the above-given terminal window, we have changed the permissions of the file ‘sample to ‘764’.

‘764’ absolute code says the following:

• Owner can read, write and execute
• Usergroup can read and write
• World can only read

This is shown as ‘-rwxrw-r–

This is how you can change user permissions in Linux on file by assigning an absolute number.

Symbolic Mode in Linux

In the Absolute mode, you change permissions for all 3 owners. In the symbolic mode, you can modify permissions of a specific owner. It makes use of mathematical symbols to modify the Unix file permissions.

Operator	Description
+	Adds a permission to a file or directory
–	Removes the permission
=	Sets the permission and overrides the permissions set earlier.

The various owners are represented as –

User Denotations
u	user/owner
g	group
o	other
a	all

We will not be using permissions in numbers like 755 but characters like rwx. Let’s look into an example

Changing Ownership and Group in Linux

For changing the ownership of a file/directory, you can use the following command:

In case you want to change the user as well as group for a file or directory use the command

In case you want to change group-owner only, use the command

chgrp group_name filename

‘chgrp’ stands for change group.

Tip

• The file /etc/group contains all the groups defined in the system
• You can use the command “groups” to find all the groups you are a member of

Summary:

• Linux being a multi-user system uses permissions and ownership for security.
• There are three user types on a Linux system viz. User, Group and Other
• Linux divides the file permissions into read, write and execute denoted by r,w, and x
• The permissions on a file can be changed by ‘chmod’ command which can be further divided into Absolute and Symbolic mode
• The ‘chown’ command can change the ownership of a file/directory. Use the following commands: chown user file or chown user:group file
• The ‘chgrp’ command can change the group ownership chrgrp group filename
• What does x – eXecuting a directory mean? A: Being allowed to “enter” a dir and gain possible access to sub-dirs.

Источник