Linux see processes and ports

How to know what program is listening on a given port?

I suspect a program is listening on port 8000 on my machine. When I run the following command, I get this error:

> python -m SimpleHTTPServer # Lots of python error socket.error: [Errno 98] Address already in use 

If I use another port ( 8000 is the default), the web server runs fine. If I run wget localhost:8000 from the command line, it returns 404 Not Found . What can I do (or what tools are available) to find what program is listening on port 8000 , and from there where that program is configured?

8 Answers 8

Open your terminal and type as

that command will list you the application used by that port with PID. (If no results run via sudo since your might have no permission to certain processes.)

For example, with port 8000 ( python3 -m http.server ):

$ lsof -i :8000 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME python3 3269 user 3u IPv4 1783216 0t0 TCP *:8000 (LISTEN) 

$ sudo lsof -i :22 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME sshd 998 root 3u IPv4 1442116 0t0 TCP *:ssh (LISTEN) sshd 998 root 4u IPv6 1442118 0t0 TCP *:ssh (LISTEN) 

@Imray the example searches for port 8881. The PID column contains the process IDs and the NAME column contains the ports.

You can use netstat to see which process is listening on which port.

You can use this command to have a full detail :

if you need to know exactly which one is listening on port 8000 you can use this :

sudo netstat -peanut | grep ":8000 " 

There is no process that can hide from netstat.

To kill/end the process use kill where is the process id displayed in the last column of netstat ‘s output. Eg. kill 31612 .

To expound on the answer by @33833 you can get some very detailed info, for example:

$ lsof -i :8000 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME squid3 1289 proxy 15u IPv6 14810490 0t0 TCP *:8000 (LISTEN) $ ps -fp 1289 UID PID PPID C STIME TTY TIME CMD proxy 1289 1 0 09:48 ? 00:00:00 /usr/sbin/squid3 -N -f /etc/squid-deb-proxy/squid-deb-proxy.conf 

I can see right there that squid is the process, but it is actualy my squid-deb-proxy that is taking up the port.

Another good example of a java app:

$ lsof -i :4242 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME java 3075 root 86u IPv4 12019 0t0 TCP *:4242 (LISTEN) $ ps -fp 3075 UID PID PPID C STIME TTY TIME CMD root 3075 1 15 May24 ? 3-16:07:25 /usr/local/crashplan/jre/bin/java -Dfile.encoding=UTF-8 -Dapp=CrashPlanService -DappBaseName=CrashPl 

You can see in lsof (LiSt Open Files) that it is java, which is less than helpful. Running the ps command with the PID we can see right away that it is CrashPlan.

Источник

Check what ports and processes are running in Ubuntu

You must know what ports are operating and which process is running on that port before connecting to a port or debugging. Sometimes you may also have problems like “port already in use,” and if necessary, you have to know what process is using that port and terminate it if needed. It may be achieved by the knowledge of which ports the different processes use. We shall examine some approaches to complete the work in this post. First, though, let’s grasp some of the technical words used in this article.

What are Ports?

Ports are an abstraction that may communicate applications using various protocols. For transport layer protocols like TCP, UDP, and SMTP, ports are utilized. Different services are allocated a port number, such as port 80 used by HTTP, port 22 used by SSH, etc. The usage of port numbers enables a couple of systems to open many sockets through the same transport protocol.

Multiple ports and dynamic ports 49152-65535 are used in an application. The first 1024 ports (00-1023) are System Ports, which prohibit user programs from meddling with them since many operating systems reserve these ports for privileged functions.
Ports may receive and deliver data and are above the OSI model’s Transport layer.

What are Processes?

In essence, a process is a program’s dynamic instance and is carried out sequentially. An entity representing the core work unit to be implemented in the system is specified as a process. In plain words, we create our computer programs in a text file, and it becomes a process that does all the duties stated in the program when we execute this program.

Let us now see the methods to check the ports and processes running in Ubuntu.

Method 1: Using netstat and grep Command

The netstat command displays network status and protocol statistics. Depending on the command line parameter used, netstat shows different sorts of network data. TCP and UDP endpoints can be seen in table, routing table, and interface information formats.

The grep filter examines the file and displays every line that contains that pattern for a certain pattern of characters. The pattern looked for in the file is called the regular expression.

Use the following command to check which process is running on a port. You must specify the port in this command.

Method 2: Listing All Listening Ports Using netstat

Use the following command to list all TCP or UDP ports that listen, including those that utilize ports and socket status.

Method 3: Using ss Command

The command ss is a utility used to dump the statistical socket and show information similarly to netstat. Also, TCP and state information is displayed than most other tools. It is also slightly faster than netstat.

Conclusion

We have seen various commands to see which ports your system uses and how to run on a particular port. These commands can be particularly helpful while optimizing the performance of the system and in various debugging tasks. For instance, if you want to run a web application on port 8000 but that port is already occupied, you can look for the process running on this port and kill the process if needed. We have discussed three methods to check the ports and processes running in Ubuntu use that best suit your needs.

About the author

Simran Kaur

Simran works as a technical writer. The graduate in MS Computer Science from the well known CS hub, aka Silicon Valley, is also an editor of the website. She enjoys writing about any tech topic, including programming, algorithms, cloud, data science, and AI. Travelling, sketching, and gardening are the hobbies that interest her.

Источник

Check Which Process Is Using a Port on Linux

In computer networking, a port represents a logical entry and exit point for a connection. Ports are based on software and are entirely virtual. These ports on a computer are managed by the operating system.

What Will We Talk About?

This quick tutorial demonstrates the various methods to determine which Linux process or service is currently listening on a specific port. Let’s talk about ports and their purpose.

How Are Ports Analogous to Physical Ports?

Just as physical ports help to interact with various peripheral devices connected to a computer, ports help the different services to communicate with each other. These services can be on the same computer or on different computers.

A Bit About Port of a Service

To listen for incoming connection requests, a process associates itself with a port number. Most processes are set up with a default port, and they have to use that port as per their specification. They do not automatically switch to the other port unless their configuration is explicitly modified.

A few examples of protocols and their associated default ports include the Secure Shell (SSH) protocol (port22), the Apache HTTP (port80), the MySQL database server (port3306), and so forth. You may use this information to discover which default port does a service utilizes.

The config file of these services can be edited to use some other port as well.

Checking the Ports on Linux

Let’s now see how to check what port/ports a process is using on Linux. Here, we will show you the different commands for this purpose.

1. Lsof Command

The lsof utility is helpful to obtain a list of the ports which are used by your system. Let’s consider the following example to get an information about a process (processes) using the TCP port 22:

The lsof command gives more information like the user’s name and what process IDs are linked to each process. It works with both TCP and UDP ports.

2. SS Command

The ss command is another way to find out which processes are linked to a certain port. Although lsof is the more common abbreviation, some people may find ss to be more handy.

Let’s look for the processes or services that listen on port 3306:

Let’s break down this command:

1. t: It tells the ss command to display the TCP packets.

2. u: It tells the ss command to display the UDP packets.

3. n: It is used to display the port numbers instead of their translations.

4. a: It is used to display the listening as well as non-listening sockets of all types.

5. p: It is used to display the processes that utilize a socket.

The result of the previous command shows which process is utilizing which port. You may also issue the following command:

Here, sport signifies the source port.

These two approaches may help you find the IDs of the processes that are connected to different ports.

3. Netstat Command

The netstat command shows the information about your network and can be used to fix the problems or change the way that your network is set up. It can also keep a close watch on your network connections.

This command is often used to see an information about inbound and outbound connections, routing tables, port listening, and usage stats. Although it has been rendered obsolete in recent years, netstat is still a useful tool for analyzing networks.

With the grep command, netstat can determine which process or service is using a certain port (by mentioning the port):

The options used here can be classified as follows:

1. t: It only shows the TCP connection.

2. l: It is used to display the results in a list.

3. n: It displays addresses and port numbers in numerical format.

4. p: It displays the PID and program name which are associated with each socket.

4. Fuser Command

The fuser command determines the processes that utilize the files or sockets. You can use it to list the services which run on a specific port. Let’s take the example of port 3306 and see what services are running here:

This provides us with the process numbers using this port. You can use this process number to find the corresponding process names. For example, if the process number is 15809, the command to use here is as follows:

However, certain tools are required to identify the processes that utilize a non-standard port. “LSOF” is a tool for discovering what services are available on a network and what ports they use. Consider the following example. This shows how to list the UDP and TCP listening ports:

The following is a description of the options that are used here:

1. P: It suppresses the port service name lookup.

2. n: It displays the numeric network addresses.

3. i: It lists the IP sockets.

Both the ports and the associated processes are shown in the previously-mentioned result. This way is particularly useful for processes with non-default ports.

Conclusion

In this article, we talked about four possible Linux command-line tools and provided the examples on how to use them to find out which process is listening on a certain port.

About the author

Ali Imran Nagori

Ali imran is a technical writer and Linux enthusiast who loves to write about Linux system administration and related technologies. You can connect with him on LinkedIn
.

Источник