Linux send error messages

Raise error in a Bash script

I want to raise an error in a Bash script with message «Test cases Failed . «. How to do this in Bash? For example:

if [ condition ]; then raise error "Test cases failed . " fi 

What do you want to happen on this error? How is your script called? Is it just one script or many scripts? What are the uses of your script going to look like?

6 Answers 6

This depends on where you want the error message be stored.

echo "Error!" > logfile.log exit 125 

When you raise an exception you stop the program’s execution.

You can also use something like exit xxx where xxx is the error code you may want to return to the operating system (from 0 to 255). Here 125 and 64 are just random codes you can exit with. When you need to indicate to the OS that the program stopped abnormally (eg. an error occurred), you need to pass a non-zero exit code to exit .

As @chepner pointed out, you can do exit 1 , which will mean an unspecified error.

Basic error handling

If your test case runner returns a non-zero code for failed tests, you can simply write:

test_handler test_case_x; test_result=$? if ((test_result != 0)); then printf '%s\n' "Test case x failed" >&2 # write error message to stderr exit 1 # or exit $test_result fi 
if ! test_handler test_case_x; then printf '%s\n' "Test case x failed" >&2 exit 1 fi 
test_handler test_case_x || < printf '%s\n' "Test case x failed" >&2; exit 1; > 

To exit with test_handler’s exit code:

test_handler test_case_x || < ec=$?; printf '%s\n' "Test case x failed" >&2; exit $ec; > 

Advanced error handling

If you want to take a more comprehensive approach, you can have an error handler:

exit_if_error() < local exit_code=$1 shift [[ $exit_code ]] && # do nothing if no error code passed ((exit_code != 0)) && < # do nothing if error code is 0 printf 'ERROR: %s\n' "$@" >&2 # we can use better logging here exit "$exit_code" # we could also check to make sure # error code is numeric when passed > > 

then invoke it after running your test case:

run_test_case test_case_x exit_if_error $? "Test case x failed" 
run_test_case test_case_x || exit_if_error $? "Test case x failed" 

The advantages of having an error handler like exit_if_error are:

  • we can standardize all the error handling logic such as logging, printing a stack trace, notification, doing cleanup etc., in one place
  • by making the error handler get the error code as an argument, we can spare the caller from the clutter of if blocks that test exit codes for errors
  • if we have a signal handler (using trap), we can invoke the error handler from there

Error handling and logging library

Here is a complete implementation of error handling and logging:

  • Error handling in Bash
  • The ‘caller’ builtin command on Bash Hackers Wiki
  • Are there any standard exit status codes in Linux?
  • BashFAQ/105 — Why doesn’t set -e (or set -o errexit, or trap ERR) do what I expected?
  • Equivalent of __FILE__ , __LINE__ in Bash
  • Is there a TRY CATCH command in Bash
  • To add a stack trace to the error handler, you may want to look at this post: Trace of executed programs called by a Bash script
  • Ignoring specific errors in a shell script
  • Catching error codes in a shell pipe
  • How do I manage log verbosity inside a shell script?
  • How to log function name and line number in Bash?
  • Is double square brackets [[ ]] preferable over single square brackets [ ] in Bash?
Читайте также:  Process exit codes linux

There are a couple more ways with which you can approach this problem. Assuming one of your requirement is to run a shell script/function containing a few shell commands and check if the script ran successfully and throw errors in case of failures.

The shell commands in generally rely on exit-codes returned to let the shell know if it was successful or failed due to some unexpected events.

So what you want to do falls upon these two categories

Depending on which one you want to do, there are shell options available to use. For the first case, the shell provides an option with set -e and for the second you could do a trap on EXIT

Should I use exit in my script/function?

Using exit generally enhances readability In certain routines, once you know the answer, you want to exit to the calling routine immediately. If the routine is defined in such a way that it doesn’t require any further cleanup once it detects an error, not exiting immediately means that you have to write more code.

So in cases if you need to do clean-up actions on script to make the termination of the script clean, it is preferred to not to use exit .

Should I use set -e for error on exit?

set -e was an attempt to add «automatic error detection» to the shell. Its goal was to cause the shell to abort any time an error occurred, but it comes with a lot of potential pitfalls for example,

    The commands that are part of an if test are immune. In the example, if you expect it to break on the test check on the non-existing directory, it wouldn’t, it goes through to the else condition

set -e somecommand that fails | cat - echo survived 

The verdict is if you want to be able to handle an error instead of blindly exiting, instead of using set -e , use a trap on the ERR pseudo signal.

The ERR trap is not to run code when the shell itself exits with a non-zero error code, but when any command run by that shell that is not part of a condition (like in if cmd , or cmd || ) exits with a non-zero exit status.

The general practice is we define an trap handler to provide additional debug information on which line and what cause the exit. Remember the exit code of the last command that caused the ERR signal would still be available at this point.

cleanup() < exitcode=$? printf 'error condition hit\n' 1>&2 printf 'exit code returned: %s\n' "$exitcode" printf 'the command executing at the time of the error was: %s\n' "$BASH_COMMAND" printf 'command present on line: %d' "$" # Some more clean up code can be added here before exiting exit $exitcode > 

and we just use this handler as below on top of the script that is failing

Читайте также:  Настройка dns oracle linux

Putting this together on a simple script that contained false on line 15, the information you would be getting as

error condition hit exit code returned: 1 the command executing at the time of the error was: false command present on line: 15 

The trap also provides options irrespective of the error to just run the cleanup on shell completion (e.g. your shell script exits), on signal EXIT . You could also trap on multiple signals at the same time. The list of supported signals to trap on can be found on the trap.1p — Linux manual page

Another thing to notice would be to understand that none of the provided methods work if you are dealing with sub-shells are involved in which case, you might need to add your own error handling.

    On a sub-shell with set -e wouldn’t work. The false is restricted to the sub-shell and never gets propagated to the parent shell. To do the error handling here, add your own logic to do (false) || false

set -e (false) echo survived 
trap 'echo error' ERR (false) 

along with pipefail , which does what you want for pipes, set -o errtrace aka set -E should be mentioned, which takes care of the concerns you raise around functions

Here’s a simple trap that prints the last argument of whatever failed to STDERR, reports the line it failed on, and exits the script with the line number as the exit code. Note these are not always great ideas, but this demonstrates some creative application you could build on.

trap 'echo >&2 "$_ at $LINENO"; exit $LINENO;' ERR 

I put that in a script with a loop to test it. I just check for a hit on some random numbers; you might use actual tests. If I need to bail, I call false (which triggers the trap) with the message I want to throw.

For elaborated functionality, have the trap call a processing function. You can always use a case statement on your arg ($_) if you need to do more cleanup, etc. Assign to a var for a little syntactic sugar —

trap 'echo >&2 "$_ at $LINENO"; exit $LINENO;' ERR throw=false raise=false while : do x=$(( $RANDOM % 10 )) case "$x" in 0) $throw "DIVISION BY ZERO" ;; 3) $raise "MAGIC NUMBER" ;; *) echo got $x ;; esac done 
# bash tst got 2 got 8 DIVISION BY ZERO at 6 # echo $? 6 
runTest1 "Test1 fails" # message not used if it succeeds 

Lots of room for design improvement.

The draw backs include the fact that false isn’t pretty (thus the sugar), and other things tripping the trap might look a little stupid. Still, I like this method.

You have 2 options: Redirect the output of the script to a file, Introduce a log file in the script and

Here you assume that the script outputs all necessary info, including warning and error messages. You can then redirect the output to a file of your choice.

The above command redirects both the standard output and the error output to your log file.

Читайте также:  Как установить lxde linux

Using this approach you don’t have to introduce a log file in the script, and so the logic is a tiny bit easier.

In your script add a log file either by hard coding it:

or passing it by a parameter:

logFile="$" # This assumes the first parameter to the script is the log file 

It’s a good idea to add the timestamp at the time of execution to the log file at the top of the script:

You can then redirect your error messages to the log file

if [ condition ]; then echo "Test cases failed!!" >> "$"; fi 

This will append the error to the log file and continue execution. If you want to stop execution when critical errors occur, you can exit the script:

if [ condition ]; then echo "Test cases failed!!" >> "$"; # Clean up if needed exit 1; fi 

Note that exit 1 indicates that the program stop execution due to an unspecified error. You can customize this if you like.

Using this approach you can customize your logs and have a different log file for each component of your script.

If you have a relatively small script or want to execute somebody else’s script without modifying it to the first approach is more suitable.

If you always want the log file to be at the same location, this is the better option of the 2. Also if you have created a big script with multiple components then you may want to log each part differently and the second approach is your only option.

I often find it useful to write a function to handle error messages so the code is cleaner overall.

# Usage: die [exit_code] [error message] die() < local code=$? now=$(date +%T.%N) if [ "$1" -ge 0 ] 2>/dev/null; then # assume $1 is an error code if numeric code="$1" shift fi echo "$0: ERROR at $$" >&2 exit $code > 

This takes the error code from the previous command and uses it as the default error code when exiting the whole script. It also notes the time, with microseconds where supported (GNU date’s %N is nanoseconds, which we truncate to microseconds later).

If the first option is zero or a positive integer, it becomes the exit code and we remove it from the list of options. We then report the message to standard error, with the name of the script, the word «ERROR», and the time (we use parameter expansion to truncate nanoseconds to microseconds, or for non-GNU times, to truncate e.g. 12:34:56.%N to 12:34:56 ). A colon and space are added after the word ERROR, but only when there is a provided error message. Finally, we exit the script using the previously determined exit code, triggering any traps as normal.

Some examples (assume the code lives in script.sh ):

if [ condition ]; then die 123 "condition not met"; fi # exit code 123, message "script.sh: ERROR at 14:58:01.234564: condition not met" $command |grep -q condition || die 1 "'$command' lacked 'condition'" # exit code 1, "script.sh: ERROR at 14:58:55.825626: 'foo' lacked 'condition'" $command || die # exit code comes from command's, message "script.sh: ERROR at 14:59:15.575089" 

Источник

Оцените статью
Adblock
detector