Linux setting folder permissions

Change folder permissions and ownership

I would like the user to have full rights on this folder (as well as all sub-directories and files in it):

currently owned by root. I have found numerous posts (in this forum and elsewhere) on how to do this for files but I can’t find a way to do it for whole folders.

9 Answers 9

Use chown to change ownership and chmod to change rights.

As Paweł Karpiński said, use the -R option to apply the rights for all files inside of a directory too.

Note that both these commands just work for directories too. The -R option makes them also change the permissions for all files and directories inside of the directory.

sudo chown -R username:group directory 

will change ownership (both user and group) of all files and directories inside of directory and directory itself.

sudo chown username:group directory 

will only change the permission of the folder directory but will leave the files and folders inside the directory alone.

As enzotib mentioned, you need to use sudo to change the ownership from root to yourself.

Note that if you use chown : (Note the left-out group), it will use the default group for that user.

If you want to change only the group, you can use:

BEWARE of recursively taking ownership of ANY directory. Think before you leap. Don’t be chown copypastin’ from the internet, kids. Just because you want to install a node package and it won’t let you, don’t sudo chown -R just because the fist hit from googling the error message says to. Reckless sudo chown -R -ing can kill your OS.

It needs to be said that using the -R option only applies to files and folders that exist in the directory already. It does NOT apply to future creations. For example, if you create another folder or file as root within the folder you’ve already changed permissions on, you will have the same experiences you’re having now until you chmod\chown them again.

Make the current user own everything inside the folder (and the folder itself):

very helpful for newbies (like me) when don’t know what to type in ‘usergroup’ for sudo chown : -R /.blabla

If you prefer, this can be done with a GUI as well. You will need to open Nautilus as root to do so. Press Alt + F2 to access the «Run Applications» dialog and enter gksu nautilus

Next, browse to and right click on the folder you would like to modify. Then, select «Properties» from the context menu. You can now select the user or group that you would like to be the «Owner» of the folder as well as the permissions you would like to grant them. Finally, press «Apply Permissions to Enclosed Files» to apply the changes recursively.

Though it seems this does not always work for some operations in a deep folder tree. If it does not work use the appropriate terminal command.

Источник

How to manage Linux permissions for users, groups, and others

How to manage permissions and ownership for users, groups, and all others to resources such as directories and files.

Managing access to resources is a fundamental task for sysadmins. This responsibility consists of three components: identities, resources, and permissions. This article covers several user, group, and file management commands to control access to resources. The article uses a «How do I…?» format, and it assumes you have a few resources to work with. Specifically, I cover the following topics:

• Creating directories and files
• Managing ownership and associated groups
• Setting permissions with absolute and symbolic modes

Linux security

Setting up a playground

I’ve been in IT for about 25 years, and most of that time was spent as a technical trainer. That means that the things that I write are usually structured as some sort of lab or other hands-on opportunity. It’s just how I cover material. With that in mind, I’ll assume you have a couple of identities and resources to experiment with as you read the rest of the article. You can use the following commands to set up a playground. It’s best to do this on a virtual machine rather than your personal Linux box, but these tasks are relatively harmless.

Create two new users and two new groups to work with. Note that you do not need to configure passwords for the users in this exercise, as you won’t log on with those accounts.

# useradd user01 # useradd user02 # groupadd groupA # groupadd groupB

Note: You would use the passwd user01 command to set the user’s password.

[ Want to test your sysadmin skills? Take a skills assessment today. ]

In your home directory, create a new directory named playground :

Change into the ~/playground directory by using the cd command. You are ready to work with the commands and concepts below.

When you’ve completed the article and learned the techniques I’ve covered, delete the two user accounts, the groups, and the playground directory. Use rm -fR /playground , userdel user01 , and groupdel groupA to remove the resources.

How do I create directories and files?

Use the mkdir command to create directories. The touch command is one of many ways to create files.

How do I create a directory named Resources ?

How do I create a directory path (a series of directories that don’t yet exist)?

# mkdir -p Resources/data/2020data

Note: The goal here is to create the 2020data directory, but the given path’s data directory does not yet exist. The -p option creates parent directories as needed to complete the path.

How do I create a file named file1 ?

How do I create several files at once?

How do I manage ownership and groups?

In the playground directory, display the current owner and group associated with the Resources directory and the files.

How do I display permission, owners, and groups?

The ls -l command displays directory contents in long format. The long format contains both permissions and ownership. You can see that the user account that created the resources also owns those resources. The group association is also that user’s primary group.

How do I change the user/owner associated with file1 ?

How do I change the group associated with file1 ?

How do I change the owner and group at the same time for file2 ?

There is a specific chgrp command, but I prefer only to memorize one command ( chown ) and apply it to both functions (user and group associations) rather than chown for the user and then have to recall chgrp for the group.

How do I change the user/group for a directory and all of its contents?

# chown -R user01:groupA Resources

The above task provides a recursive configuration. Technically, recursive commands are repeated on each specified object. Effectively, recursive means «this and everything in it.» In the above example, you are configuring the related user/group for the Resources directory and everything in it. Without the -R option, you would only affect the Resources directory itself, but not its contents.

How do I manage permissions?

The change mode or chmod command sets permissions. The syntax is straight-forward:

chmod permissions resource-name

Here are two examples of manipulating permissions for file2 :

# chmod 740 file2 # chmod u=rwx,g=r,o-rwx file2

But wait! Those appear to be radically different examples (they’re not, actually). What are all those letters and numbers?

We need to discuss absolute mode and symbolic mode.

How do I use absolute mode?

Absolute mode is one of two ways of specifying permissions. I’ve seen this mode referred to as octal or numeric mode, but the term I learned was absolute. That term also makes the most sense to me because it’s an absolute statement of the desired permissions. I always told my students that this seemed like the most complex of the two modes but is actually the simplest. Usually, they agreed.

Each access level (read, write, execute) has an octal value:

Access level	Octal value
Read	4
Write	2
Execute	1

Each identity (user, group, others) has a position:

Identity	Position
User	First or left-most
Group	Middle
Others	Last or right-most

Great Linux resources

The absolute mode syntax states the desired permissions from left to right.

How do I grant the user (owner) read, write, and execute, the group read-only, and all others no access to file2 by using absolute mode?

The three permissions values are associated with identities:
ugo
740

• The 7 is assigned to the user and is the sum of 4+2+1 or read+write+execute (full access)
• The 4 is assigned to the group and is the sum of 4+0+0 (read-only)
• The 0 is assigned to others and is the sum of 0+0+0 (no access)

In this example, the user has rwx, the group has r only, and all others have no access to file2 .

Let’s look at one more example.

How do I grant the user (owner) read and write, the group read-only, and all others read-only to file2 ?

• The user has 6 (read and write)
• The group has 4 (read-only)
• All others have 4 (read-only)

I find this easier because there are no calculations involved. I’m not concerned with adding or subtracting specific permissions based on the current settings. Instead, I say, «set the permissions to be this,» and that’s the end result I get. It’s an absolute statement.

How do I set permissions for the Resources directory and all of its contents by using absolute mode?

How do I use symbolic mode?

Symbolic mode uses more symbols, but the symbols are simpler to understand. That’s attractive to sysadmins that are new to standard Linux permissions.

Each access level has a symbol:

Access level	Symbol
Read	r
Write	w
Execute	x

Each identity has a symbol:

Identity	Symbol
User	u
Group	g
Others	o

There are also operators to manipulate the permissions:

Task	Operator
Grant a level of access	+
Remove a level of access	—
Set a level of access	=

The general chmod command syntax is the same:

command permissions directory/file

How do I remove the read permissions from others for file2 by using symbolic mode?

This example removes ( — ) the read ( r ) permission from others ( o ) for file2 .

Here’s another simple example:

How do I grant the read and write permissions to the group for file2 ?

This one gives ( + ) read and write ( rw ) to the group ( g ) for file2 .

How do I set permissions for a directory and all of its contents by using symbolic mode?

# chmod -R o=rwx,g+rw,o-rwx Resources

Special permissions and Access Control Lists

The above discussion covers standard Linux permissions—applying rwx to the user, group, and all others. Linux has far more flexibility, however. Special permissions permit users to run applications with other credentials, control the inheritance of group associations, and keep files from being changed accidentally. Check out this great article on special permissions.

Linux also has a way of enforcing different permissions for different users and groups. Access Control Lists (ACLs) permit sysadmins to define permissions for more than just one user and one group, which adds a great deal more flexibility to standard permissions. For example, user01 can be granted rw- to file1 , while user02 can be granted r— to file1 . Here is a great article on ACLs.

Wrap up

Creating resources, managing users, and setting permissions are fundamental tasks for Linux users. My goal was to provide a quick and easy guide based on common questions or tasks that we must all accomplish regularly. If you’re new to Linux, having a solid grasp of the eight commands discussed above will make your sysadmin life much easier.

Источник