Linux show process and port

How to find ports opened by process ID in Linux?

Hmm..I don’t seem to have the —all and —program options. I’m using OSX. Brew doesn’t seem to have a formula for it either.

-n will dramatically speed things up by not resolving hostnames. netsta -tupan is a good default command all and easy to remember.

You can use the command below:

As a side note, netstat -ao will read the /proc/PID/tcp etc to see the ports opened by the process. This means that its reading information supplied by the system (the linux KERNEL), and is in no way directly looking on the network interface or other means. Same goes for lsof.

If you are doing this as a security measure, you failed. You should never (NEVER EVER) trust the output of netstat, even if you are 100% sure you are in fact running a real netstat program (as opposed to a trojaned version) or any other program that reads the /proc filesystem. Some people seem to think that netstat, ls, ps or any other of the standard unix tools do some sort of magic and poll information from the sources, the truth is all of them rely on the /proc filesystem to get all of their data, which can be easily subverted by a rootkit or hypervisor.

If you’re dealing with a rootkitted system or a compromised hypervisor, you can’t trust anything, including something that purports to look directly at the network interface.

You can use the netstat command line tool with the -p command line argument:

-p (Linux):

Process: Show which processes are using which sockets (similar to -b under Windows). You must be root to do this.

To display all ports open by a process with id $PID :

In some embedded devices or with old version of Linux, the problem is netstat do not have —process or -p options available.

The following script shows process with its IP and port, you must be root.

#!/bin/bash for protocol in tcp udp ; do #echo "protocol $protocol" ; for ipportinode in `cat /proc/net/$ | awk '/.*:.*:.*/'` ; do #echo "#ipportinode=$ipportinode" inode=`echo "$ipportinode" | cut -d"|" -f3` ; if [ "#$inode" = "#" ] ; then continue ; fi lspid=`ls -l /proc/*/fd/* 2>/dev/null | grep "socket:\[$inode\]" 2>/dev/null` ; pid=`echo "lspid=$lspid" | awk 'BEGIN /socket/'` ; if [ "#$pid" = "#" ] ; then continue ; fi exefile=`ls -l /proc/$pid/exe | awk 'BEGIN ">/->/'` #echo "$protocol|$pid|$ipportinode" echo "$protocol|$pid|$ipportinode|$exefile" | awk ' BEGIN function iphex2dec(ipport) < ret=sprintf("%d.%d.%d.%d: %d","0x"substr(ipport,1,2),"0x"substr(ipport,3,2), "0x"substr(ipport,5,2),"0x"substr(ipport,7,2),"0x"substr(ipport,10,4)) ; if( ret == "0.0.0.0:0" ) #compatibility others awk versions < ret= strtonum("0x"substr(ipport,1,2)) ; ret=ret "." strtonum("0x"substr(ipport,3,2)) ; ret=ret "." strtonum("0x"substr(ipport,5,2)) ; ret=ret "." strtonum("0x"substr(ipport,7,2)) ; ret=ret ":" strtonum("0x"substr(ipport,10)) ; >return ret ; > < print $1" pid:"$2" local="iphex2dec($3)" remote="iphex2dec($4)" inode:"$5" exe=" $6 ; >' ; #ls -l /proc/$pid/exe ; done ; done 

tcp pid:1454 local=1.0.0.127:5939 remote=0.0.0.0:0 inode:13955 exe=/opt/teamviewer/tv_bin/teamviewerd tcp pid:1468 local=1.1.0.127:53 remote=0.0.0.0:0 inode:12757 exe=/usr/sbin/dnsmasq tcp pid:1292 local=0.0.0.0:22 remote=0.0.0.0:0 inode:12599 exe=/usr/sbin/sshd tcp pid:4361 local=1.0.0.127:631 remote=0.0.0.0:0 inode:30576 exe=/usr/sbin/cupsd tcp pid:1375 local=1.0.0.127:5432 remote=0.0.0.0:0 inode:12650 exe=/usr/lib/postgresql/9.3/bin/postgres 

With ls you can know the process route.

The fuser command says that the process is: 2054

I’ve added IPv6 support and made a few fixes. Additionally on my system the octets of the IP address are reversed. Dependencies are only to posix shell, awk and cut.

My Version can be found on Github

#!/bin/sh # prints all open ports from /proc/net/* # # for pretty output (if available) start with # ./linux-get-programm-to-port.sh | column -t -s $'\t' #set -x ip4hex2dec () < local ip4_1octet="0x$" local ip4_2octet="$" ip4_2octet="0x$" local ip4_3octet="$" ip4_3octet="0x$" local ip4_4octet="$" ip4_4octet="0x$" local ip4_port="0x$" # if not used inverse #printf "%d.%d.%d.%d:%d" "$ip4_1octet" "$ip4_2octet" "$ip4_3octet" "$ip4_4octet" "$ip4_port" printf "%d.%d.%d.%d:%d" "$ip4_4octet" "$ip4_3octet" "$ip4_2octet" "$ip4_1octet" "$ip4_port" > # reoder bytes, byte4 is byte1 byte2 is byte3 . reorderByte() < if [ $-ne 8 ]; then echo "missuse of function reorderByte"; exit; fi local byte1="$" local byte2="$" byte2="$" local byte3="$" byte3="$" local byte4="$" echo "$byte4$byte3:$byte2$byte1" > # on normal intel platform the byte order of the ipv6 address in /proc/net/*6 has to be reordered. ip6hex2dec()< local ip_str="$" local ip6_port="0x$" local ipv6="$(reorderByte $)" local shiftmask="$" ipv6="$ipv6:$(reorderByte $)" shiftmask="$" ipv6="$ipv6:$(reorderByte $)" ipv6="$ipv6:$(reorderByte $)" ipv6=$(echo $ipv6 | awk '< gsub(/(:0|^0)/, ":"); sub(/(:0)+:/, "::");print>') printf "%s:%d" "$ipv6" "$ip6_port" > for protocol in tcp tcp6 udp udp6 raw raw6; do #echo "protocol $protocol" ; for ipportinode in `cat /proc/net/$protocol | awk '/.*:.*:.*/'` ; do #echo "#ipportinode=$ipportinode" inode=$ if [ "#$inode" = "#" ] ; then continue ; fi lspid=`ls -l /proc/*/fd/* 2>/dev/null | grep "socket:\[$inode\]" 2>/dev/null` ; pids=`echo "$lspid" | awk 'BEGIN /socket/ END>'` ; # removes duplicats for this pid #echo "#lspid:$lspid #pids:$pids" for pid in $pids; do if [ "#$pid" = "#" ] ; then continue ; fi exefile=`ls -l /proc/$pid/exe | awk 'BEGIN ">/->/'`; cmdline=`cat /proc/$pid/cmdline` local_adr_hex=$ remote_adr_hex=$ remote_adr_hex=$ if [ "#$" = "#6" ]; then local_adr=$(ip6hex2dec $local_adr_hex) remote_adr=$(ip6hex2dec $remote_adr_hex) else local_adr=$(ip4hex2dec $local_adr_hex) remote_adr=$(ip4hex2dec $remote_adr_hex) fi echo "$protocol pid:$pid \t$local_adr \t$remote_adr \tinode:$inode \t$exefile $cmdline" done done done 

Источник

Linux: Find Out Which Port Number a Process is Listening on

As Linux users, we sometimes need to know what port number a particular process is listening on. All ports are associated with a process ID or service in an operating system. So how do we find this port? In this article, we will present three different methods that you can use to find out which port a process is listening on.

We have run the commands and procedures described in this article on an Ubuntu 22.04 LTS system.

Method 1: Using the netstat command

Netstat, the network statistics utility, is used to display information about the network connections. This includes information about interface statistics, routing tables and much more. This utility is available on most Linux systems, so we use it to find out which ports certain processes on the system are using.

To use the netstat command, you must install the net-tools utility, if it is not already installed on your system, using the following command:

$ sudo apt install net-tools

Then run the following command:

The above command gives netstat information based on the following features:

• l: display only listening sockets
• t: display tcp connection
• n: display addresses in a numerical form
• p: display process ID/ Program name

For example, in the above output of the netstat command, Apache2 program with process ID 950 is running on port number 80.

You can also filter statistics for a specific port by incorporating the grep function into your command.

$ sudo netstat -ltnp | grep -w ':80'

This command will tell you specifically which process is running on port number 80.

Method 2: Using the lsof command

The lsof or the List of Open Files utility helps in listing all the open files on your Linux system. We can use this utility to view all processes open on a specific port.

For using the lsof command, you need to install the lsof utility if it is already not installed on your system through the following command:

Let us use lsof to view the service listening on a specific port.

This command will list all processes using TCP port number 80.

Method 3: Using the fuser command

The fuser command displays which process IDs are using the named files, sockets or file systems. We can use this command in order to view process IDs running on a specific TCP port.

For using the fuser command, you need to install the psmisc utility if it is already not installed on your system through the following command:

Let us view all the process IDs running on TCP port 3306 through the following command:

You can specify any port number in this command to view its listening processes.

In the above output, you can see that process ID 975 is listening on TCP 3306.

In order to view which program this process ID corresponds to, run the following command:

The output shows that process ID 975 corresponds to the program name MySDLd. Thus process ID 975 of the program MySQLd is listening on port number 3306.

Through the three methods you have learned in this article, you can easily view which TCP port a specific process on Linux is listening upon.

Search

About This Site

Vitux.com aims to become a Linux compendium with lots of unique and up to date tutorials.

Latest Tutorials

Источник

3 Ways to Find Out Which Process Listening on a Particular Port

A port is a logical entity that represents an endpoint of communication and is associated with a given process or service in an operating system. In previous articles, we explained how to find out the list of all open ports in Linux and how to check if remote ports are reachable using the Netcat command.

In this short guide, we will show different ways of finding the process/service listening on a particular port in Linux.

1. Using netstat Command

netstat (network statistics) command is used to display information concerning network connections, routing tables, interface stats, and beyond. It is available on all Unix-like operating systems including Linux and also on Windows OS.

In case you do not have it installed by default, use the following command to install it.

$ sudo apt-get install net-tools [On Debian/Ubuntu & Mint] $ sudo dnf install net-tools [On CentOS/RHEL/Fedora and Rocky Linux/AlmaLinux] $ pacman -S netstat-nat [On Arch Linux] $ emerge sys-apps/net-tools [On Gentoo] $ sudo dnf install net-tools [On Fedora] $ sudo zypper install net-tools [On openSUSE]

Once installed, you can use it with the grep command to find the process or service listening on a particular port in Linux as follows (specify the port).

In the above command, the flags.

• l – tells netstat to only show listening sockets.
• t – tells it to display tcp connections.
• n – instructs it to show numerical addresses.
• p – enables showing of the process ID and the process name.
• grep -w – shows matching of exact string (:80).

Note: The netstat command is deprecated and replaced by the modern ss command in Linux.

2. Using lsof Command

lsof command (List Open Files) is used to list all open files on a Linux system.

To install it on your system, type the command below.

$ sudo apt-get install lsof [On Debian, Ubuntu and Mint] $ sudo yum install lsof [On RHEL/CentOS/Fedora and Rocky Linux/AlmaLinux] $ sudo emerge -a sys-apps/lsof [On Gentoo Linux] $ sudo pacman -S lsof [On Arch Linux] $ sudo zypper install lsof [On OpenSUSE]

To find the process/service listening on a particular port, type (specify the port).

3. Using fuser Command

fuser command shows the PIDs of processes using the specified files or file systems in Linux.

You can install it as follows:

$ sudo apt-get install psmisc [On Debian, Ubuntu and Mint] $ sudo yum install psmisc [On RHEL/CentOS/Fedora and Rocky Linux/AlmaLinux] $ sudo emerge -a sys-apps/psmisc [On Gentoo Linux] $ sudo pacman -S psmisc [On Arch Linux] $ sudo zypper install psmisc [On OpenSUSE]

You can find the process/service listening on a particular port by running the command below (specify the port).

Then find the process name using PID number with the ps command like so.

$ ps -p 2053 -o comm= $ ps -p 2381 -o comm=

You can also check out these useful guides about processes in Linux.

You might also like:

That’s all! Do you know of any other ways of finding the process/service listening on a particular port in Linux, let us know via the comment form below.

Источник