Linux show tcp ports

3 ways to check open ports in Linux

In this blog post, we will discuss 3 ways to check open ports in Linux. We will be using the command line to do this, so if you are not familiar with that environment, don’t worry! We will walk you through everything.

Checking port status is an important task for system administrators and developers . By knowing which ports are open and which ones are closed, you can better diagnose and fix networking issues.

To check open ports in Linux, we can use three methods: the netstat command, the ss command, and the lsof command. Open the terminal and type in any command above with the right option. It will list all the open ports in Linux.

• The netstat command is a network statistics utility that displays information about network connections, routing tables, and a number of network interface statistics.
• The ss command is a utility for displaying socket statistics. It can be used to report a variety of information, including open sockets.
• The lsof command is a utility for displaying information about files that are open by processes running on the system. The lsof command can be used to find out which ports are being used by which processes.

Each of these commands will give us different information about the open ports on our system. Try running each of them and see what results you get!

Procedure to Check open ports in Linux

• Open the terminal.
• Type netstat -tulpn and press Enter. This will show you a list of all the open ports on your system, as well as the PID and name of the program that is using each port.
• If you want to see more information about a specific port, type netstat -tulpn | grep portnumber and press Enter. Replace portnumber with the actual port number you want to check. The output will show you the PID and name of the program that is using that port.

Check open ports with netstat command in Linux

The easiest way to check open ports in Linux is using netstat command. You will need to open a terminal window. Then, type in the following command:

This will give you a list of all open ports on your system, as well as the programs that are using them.

The “l” flag will show you all the open ports. The ‘p’ flag will show you the program that is using the port, including the process ID (PID) and the user that owns it.

• -t : All TCP ports
• -u : All UDP ports
• -l : Display listening server sockets
• -p : Show the PID and name of the program to which each socket belongs
• -n : Don’t resolve names
• -a: Show both listening and non-listening (for TCP this means established connections) sockets.

From the following example, we can see that ports 111,22,5432,25 are open.

# netstat -utpnl
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 1/systemd
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1900/sshd
tcp 0 0 0.0.0.0:5432 0.0.0.0:* LISTEN 182374/postgres
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 2084/master
tcp6 0 0 . 111 . * LISTEN 1/systemd
tcp6 0 0 . 22 . * LISTEN 1900/sshd
tcp6 0 0 . 5432 . * LISTEN 182374/postgres
udp 0 0 0.0.0.0:111 0.0.0.0:* 1/systemd
udp6 0 0 . 111 . * 1/systemd

If you see a socket in the “LISTENING” state, it means that the port is open and waiting for a connection.

If you want to see more information about a specific port, you can use the following command:

For example, if you want to see information about port 22 (the standard SSH port), you would type in:

# netstat -tulpn | grep 22
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1900/sshd
tcp6 0 0 . 22 . * LISTEN 1900/sshd

This will show you all of the processes that are connected to port 22, as well as their PIDs and owners.

The netstat -a command will show you all of the active sockets on your system, both listening and non-listening. This can be useful for troubleshooting purposes, as it will show you all of the sockets that are currently in use.

From the following example, we can see that there is one more TCP connection. Its state is ESTABLISHED.

# netstat -tulapn | grep 22
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1900/sshd
tcp 0 80 10.244.13.128:22 10.79.96.124:53559 ESTABLISHED 1296958/sshd:
tcp6 0 0 . 22 . * LISTEN 1900/sshd

When you see a socket in the “ESTABLISHED” state, it means that the connection is established and both sides are actively communicating. This usually indicates that the connection is working properly.

If you see a socket in the “TIME_WAIT” state, it means that the connection has been terminated but the socket is still waiting for some time to expire so that it can be freed up.

Check port status with ss command in Linux

You can also use the ss command to check open ports in Linux. It stands for socket statistics , and it gives a snapshot of all active sockets on the system. The ss command is similar to netstat, but it provides more information about each connection.

To use the ss command, type in the following:

It will show more detailed information about ports than netstat . To use ss, you will need to install the iputils-ss package.

This will give you a list of all active sockets, including the following information: – The socket type ( tcp , udp , raw , etc.) – The local address – The remote address – The state ( LISTENING , ESTABLISHED , etc.)

This will give you a list of all open ports on your system.

Example:
# ss -tulpn
Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
tcp LISTEN 0 128 0.0.0.0:111 0.0.0.0:* users:((«rpcbind»,pid=96374,fd=4),(«systemd»,pid=1,fd=58))
tcp LISTEN 0 128 0.0.0.0:22 0.0.0.0:* users:((«sshd»,pid=1900,fd=5))
tcp LISTEN 0 4096 0.0.0.0:5432 0.0.0.0:* users:((«postgres»,pid=182374,fd=6))
tcp LISTEN 0 100 127.0.0.1:25 0.0.0.0:* users:((«master»,pid=2084,fd=16))
tcp LISTEN 0 128 [::]:111 [::]:* users:((«rpcbind»,pid=96374,fd=6),(«systemd»,pid=1,fd=60))
tcp LISTEN 0 128 [::]:22 [::]:* users:((«sshd»,pid=1900,fd=7))
tcp LISTEN 0 4096 [::]:5432 [::]:* users:((«postgres»,pid=182374,fd=7))

You can also use the following command to see information about a specific port:

For example, if you want to see information about port 22 (the standard SSH port), you would type in:

Example:
# ss -tulpn | grep «22»
tcp LISTEN 0 128 0.0.0.0:22 0.0.0.0:* users:((«sshd»,pid=1900,fd=5))
tcp LISTEN 0 128 [::]:22 [::]:* users:((«sshd»,pid=1900,fd=7))

Check open ports with lsof command in Linux

we will cover the lsof command. The lsof command is a powerful tool that can be used to show a variety of information about open files on your system. To use it to check port status, type in the following:

lsof -i TCP -sTCP:LISTEN -n -P

This will give you a list of all open ports on your system, as well as the programs that are using them.

• -i TCP -sTCP:LISTEN: Look for listing ports
• -P : Inhibits the conversion of port numbers to port names for network files. Inhibiting the conversion may make lsof run a little faster. It is also useful when port name lookup is not working properly.
• -n : Do not use DNS name

# lsof -i TCP -sTCP:LISTEN -n -P
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
systemd 1 root 58u IPv4 13485027 0t0 TCP *:111 (LISTEN)
systemd 1 root 60u IPv6 13485029 0t0 TCP *:111 (LISTEN)
sshd 1900 root 5u IPv4 15494 0t0 TCP *:22 (LISTEN)
sshd 1900 root 7u IPv6 15496 0t0 TCP *:22 (LISTEN)
master 2084 root 16u IPv4 33300 0t0 TCP 127.0.0.1:25 (LISTEN)
rpcbind 96374 rpc 4u IPv4 13485027 0t0 TCP *:111 (LISTEN)
rpcbind 96374 rpc 6u IPv6 13485029 0t0 TCP *:111 (LISTEN)
postgres 182374 postgres 6u IPv4 14699999 0t0 TCP *:5432 (LISTEN)
postgres 182374 postgres 7u IPv6 14700000 0t0 TCP *:5432 (LISTEN)

You can also use the following command to see information about a specific port:

This will show you all of the processes that are connected to port 22.

COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
sshd 1900 root 5u IPv4 15494 0t0 TCP *:22 (LISTEN)
sshd 1900 root 7u IPv6 15496 0t0 TCP *:22 (LISTEN)
sshd 1296958 root 5u IPv4 20115240 0t0 TCP 10.244.13.128:22->10.79.96.124:53559 (ESTABLISHED)
sshd 1296964 howtouselinux 5u IPv4 20115240 0t0 TCP 10.244.13.128:22->10.79.96.124:53559 (ESTABLISHED)

There you have it! Three ways to check port status in Linux. Which one is your favorite? Let us know in the comments below.

David is a Cloud & DevOps Enthusiast. He has years of experience as a Linux engineer. He had working experience in AMD, EMC. He likes Linux, Python, bash, and more. He is a technical blogger and a Software Engineer. He enjoys sharing his learning and contributing to open-source.

howtouselinux.com is dedicated to providing comprehensive information on using Linux.

We hope you find our site helpful and informative.

Источник

4 Ways to Find Out What Ports Are Listening in Linux

The state of a port is either open, filtered, closed, or unfiltered. A port is said to be open if an application on the target machine is listening for connections/packets on that port.

In this article, we will explain four ways to check open ports and also will show you how to find which application is listening on what port in Linux.

1. Using Netstat Command

Netstat is a widely used tool for querying information about the Linux networking subsystem. You can use it to print all open ports like this:

The flag -l tells netstat to print all listening sockets, -t shows all TCP connections, -u displays all UDP connections and -p enables printing of application/program name listening on the port.

To print numeric values rather than service names, add the -n flag.

You can also use grep command to find out which application is listening on a particular port, for example.

$ sudo netstat -lntup | grep "nginx"

Alternatively, you can specify the port and find the application bound to, as shown.

$ sudo netstat -lntup | grep ":80"

2. Using ss Command

ss command is another useful tool for displaying information about sockets. It’s output looks similar to that of netstat. The following command will show all listening ports for TCP and UDP connections in numeric value.

3. Using Nmap Command

Nmap is a powerful and popular network exploration tool and port scanner. To install nmap on your system, use your default package manager as shown.

$ sudo apt install nmap [On Debian/Ubuntu] $ sudo yum install nmap [On CentOS/RHEL] $ sudo dnf install nmap [On Fedora 22+]

To scan all open/listening ports in your Linux system, run the following command (which should take a long time to complete).

$ sudo nmap -n -PN -sT -sU -p- localhost

4. Using lsof Command

The final tool we will cover for querying open ports is lsof command, which is used to list open files in Linux. Since everything is a file in Unix/Linux, an open file may be a stream or a network file.

To list all Internet and network files, use the -i option. Note that this command shows a mix of service names and numeric ports.

To find which application is listening on a particular port, run lsof in this form.

That’s all! In this article, we have explained four ways to check open ports in Linux. We also showed how to check which processes are bound upon particular ports. You can share your thoughts or ask any questions via the feedback form below.

Источник