Linux usb device descriptor read 64

Ubuntu can’t read my USB: «device descriptor read/64, error -110»

I have a 16GB flash drive. I’m running Ubuntu 14.04. I can’t open my flash drive and I can’t see it in GParted. After running tail -f /var/log/syslog . After inserting my flash:

USB disconnect, device number 10 Jul 3 16:39:55 rihanna-VGN-Z56GG-B kernel: [ 3309.712166] usb 2-3: new high-speed USB device number 11 using ehci-pci Jul 3 16:39:55 rihanna-VGN-Z56GG-B kernel: [ 3309.846591] usb 2-3: New USB device found, idVendor=090c, idProduct=1000 Jul 3 16:39:55 rihanna-VGN-Z56GG-B kernel: [ 3309.846601] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jul 3 16:39:55 rihanna-VGN-Z56GG-B kernel: [ 3309.846609] usb 2-3: Product: Silicon-Power Jul 3 16:39:55 rihanna-VGN-Z56GG-B kernel: [ 3309.846615] usb 2-3: Manufacturer: UFD 2.0 Jul 3 16:39:55 rihanna-VGN-Z56GG-B kernel: [ 3309.846622] usb 2-3: SerialNumber: 1401208423400131 Jul 3 16:39:55 rihanna-VGN-Z56GG-B kernel: [ 3309.847176] usb-storage 2-3:1.0: USB Mass Storage device detected Jul 3 16:39:55 rihanna-VGN-Z56GG-B kernel: [ 3309.847309] scsi12 : usb-storage 2-3:1.0 Jul 3 16:39:55 rihanna-VGN-Z56GG-B mtp-probe: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-3" Jul 3 16:39:55 rihanna-VGN-Z56GG-B mtp-probe: bus: 2, device: 11 was not an MTP device Jul 3 16:40:17 rihanna-VGN-Z56GG-B kernel: [ 3332.176107] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:40:33 rihanna-VGN-Z56GG-B kernel: [ 3347.288080] usb 2-3: device descriptor read/64, error -110 Jul 3 16:40:48 rihanna-VGN-Z56GG-B kernel: [ 3362.504081] usb 2-3: device descriptor read/64, error -110 Jul 3 16:40:48 rihanna-VGN-Z56GG-B kernel: [ 3362.720076] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:40:52 rihanna-VGN-Z56GG-B kernel: [ 3366.812110] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:41:07 rihanna-VGN-Z56GG-B kernel: [ 3381.924082] usb 2-3: device descriptor read/64, error -110 Jul 3 16:41:23 rihanna-VGN-Z56GG-B kernel: [ 3397.356093] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:41:38 rihanna-VGN-Z56GG-B kernel: [ 3412.468057] usb 2-3: device descriptor read/64, error -110 Jul 3 16:41:54 rihanna-VGN-Z56GG-B kernel: [ 3428.664065] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:42:09 rihanna-VGN-Z56GG-B kernel: [ 3443.776100] usb 2-3: device descriptor read/64, error -110 Jul 3 16:42:24 rihanna-VGN-Z56GG-B kernel: [ 3458.992085] usb 2-3: device descriptor read/64, error -110 Jul 3 16:42:25 rihanna-VGN-Z56GG-B kernel: [ 3459.208063] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:42:40 rihanna-VGN-Z56GG-B kernel: [ 3474.320039] usb 2-3: device descriptor read/64, error -110 Jul 3 16:42:50 rihanna-VGN-Z56GG-B kernel: [ 3484.516109] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:42:50 rihanna-VGN-Z56GG-B kernel: [ 3484.768108] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:43:05 rihanna-VGN-Z56GG-B kernel: [ 3499.880081] usb 2-3: device descriptor read/64, error -110 Jul 3 16:43:20 rihanna-VGN-Z56GG-B kernel: [ 3515.096081] usb 2-3: device descriptor read/64, error -110 Jul 3 16:43:21 rihanna-VGN-Z56GG-B kernel: [ 3515.312048] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:43:36 rihanna-VGN-Z56GG-B kernel: [ 3530.424032] usb 2-3: device descriptor read/64, error -110 Jul 3 16:43:46 rihanna-VGN-Z56GG-B kernel: [ 3540.505230] scsi 12:0:0:0: Device offlined - not ready after error recovery 

Источник

unixforum.org

[Решено]usb 1-1: device descriptor read/64, error -110 (В чем проблема?)

[Решено]usb 1-1: device descriptor read/64, error -110

Сообщение held » 08.06.2009 15:22

Перестали определятся USB устройства. Команда lsusb долго весит в конце выдает список usb без тех к которым подключен сканер и принтер. При загрузки и выключении выходит ошибка

usb 1-4: device descriptor read/64, error -110
usb 1-4: device descriptor read/64, error -110
usb 1-4: device descriptor read/8, error -110
usb 1-4: device descriptor read/8, error -110

в kern.log постоянно сыпится

Jun 8 16:23:40 as-desktop kernel: [ 1613.609046] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:41 as-desktop kernel: [ 1613.856045] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:41 as-desktop kernel: [ 1614.105046] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:41 as-desktop kernel: [ 1614.353071] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:41 as-desktop kernel: [ 1614.600134] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:42 as-desktop kernel: [ 1614.849041] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:42 as-desktop kernel: [ 1615.829057] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:43 as-desktop kernel: [ 1616.077062] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:43 as-desktop kernel: [ 1616.315292] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:43 as-desktop kernel: [ 1616.561048] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:43 as-desktop kernel: [ 1616.808039] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:44 as-desktop kernel: [ 1617.057038] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:44 as-desktop kernel: [ 1617.304317] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:44 as-desktop kernel: [ 1617.553041] hub 4-0:1.0: unable to enumerate USB device on port 1

В журнале в messages временами добовляется

Jun 8 16:13:47 as-desktop kernel: [ 1020.672034] usb 2-2: new full speed USB device using ohci_hcd and address 8 Jun 8 16:14:18 as-desktop kernel: [ 1051.408037] usb 2-2: new full speed USB device using ohci_hcd and address 9 Jun 8 16:14:45 as-desktop kernel: [ 1078.296026] usb 1-4: new high speed USB device using ehci_hcd and address 7 Jun 8 16:14:55 as-desktop kernel: [ 1088.652027] usb 1-4: new high speed USB device using ehci_hcd and address 8 Jun 8 16:15:06 as-desktop kernel: [ 1099.008027] usb 1-4: new high speed USB device using ehci_hcd and address 9 Jun 8 16:15:36 as-desktop kernel: [ 1129.552044] usb 1-4: new high speed USB device using ehci_hcd and address 10 Jun 8 16:16:07 as-desktop kernel: [ 1160.808049] usb 2-2: new full speed USB device using ohci_hcd and address 10 Jun 8 16:16:18 as-desktop kernel: [ 1171.232027] usb 2-2: new full speed USB device using ohci_hcd and address 11 Jun 8 16:16:28 as-desktop kernel: [ 1181.652026] usb 2-2: new full speed USB device using ohci_hcd and address 12 Jun 8 16:16:59 as-desktop kernel: [ 1212.388022] usb 2-2: new full speed USB device using ohci_hcd and address 13 Jun 8 16:17:34 as-desktop kernel: [ 1247.080031] usb 2-2: new full speed USB device using ohci_hcd and address 14 Jun 8 16:17:44 as-desktop kernel: [ 1257.500032] usb 2-2: new full speed USB device using ohci_hcd and address 15 Jun 8 16:17:55 as-desktop kernel: [ 1267.920033] usb 2-2: new full speed USB device using ohci_hcd and address 16 Jun 8 16:18:25 as-desktop kernel: [ 1298.664739] usb 2-2: new full speed USB device using ohci_hcd and address 17

В чем проблема, подскажите, пожалуйста.

Источник

Ubuntu 22.04 fails to resume with error: device descriptor read/64, error -71

It’s happening with USB bus 1-7, which is my Goodix fingerprint reader, which libfprint doesn’t have a driver for. I don’t care about this device correctly functioning. I just want my system to resume.

What I want to achieve

1. Fix it so that the USB device no longer causes this error (unlikely)
2. Completely disable the bus so that the kernel doesn’t even talk to the device (which causes the error)
3. Have GNOME shell or GDM ignores the error so that it resumes despite the error (which I don’t care since the device won’t work anyway)

Things I’ve Tried

Solution 1, as above

1. As suggested by this thread: https://ubuntuforums.org/showthread.php?t=797789, I configured usbcore.old_scheme_first to Y through /etc/default/grub . Now the kernel log prints two extra lines of:

usb 1-7: Device not responding to setup address. 

without solving the problem.

Solution 2

I tried disabling the device through udev rules. That, according to tutorials online, is just setting authorized to 0 on detecting the correct device. However, as I look into /sys/bus/usb/devices/1-7/authorized , the content is already 0 without me setting the udev rule. That is, the device should already be disabled, probably due to lack of appropriate driver.

Solution 3

Not sure where to look or what to try.

Some logs

$ lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 007: ID 27c6:5395 Shenzhen Goodix Technology Co.,Ltd. Fingerprint Reader Bus 001 Device 004: ID 8087:0029 Intel Corp. AX200 Bluetooth Bus 001 Device 009: ID 0c45:671d Microdia Integrated_Webcam_HD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 

I can confirm through the vendor and device ID that usb1-7 corresponds to the Goodix fingerprint reader.

$ sudo dmesg | fgrep "1-7" [ 1.980114] usb 1-7: new full-speed USB device number 3 using xhci_hcd [ 1.980339] usb 1-7: Device not responding to setup address. [ 2.188337] usb 1-7: Device not responding to setup address. [ 2.396070] usb 1-7: device not accepting address 3, error -71 [ 2.524100] usb 1-7: new full-speed USB device number 4 using xhci_hcd [ 2.546716] usb 1-7: New USB device found, idVendor=27c6, idProduct=5395, bcdDevice= 1.00 [ 2.546728] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.546734] usb 1-7: Product: Goodix Fingerprint Device [ 2.546739] usb 1-7: Manufacturer: HTMicroelectronics [ 2.546743] usb 1-7: SerialNumber: HTK32 

Also, it seems to only happen on battery power, and yes, I’m on a Dell XPS 15 7950. But it’s definitely different from Suspend fails to resume on Dell XPS 15 7590 on battery power only, because my case seems to be irrelevant to Bluetooth and I don’t use deep sleep.

Thank you in advance and please let me know if I should post more detail!

Источник

Debian device descriptor read 64 error 71 [closed]

When I install debian on a computer without gnome, it gives me the above error when I connect usb device to my computer. But when I install gnome, the usb port works fine. How to get rid of this?

1 Answer 1

That is the code for Protocol error ( EPROTO ). While there have been kernel issues that occasionally caused this, from my experience, this is usually a hardware issue with the USB subsystem.

The error message (which, incidentally, you didn’t post) usually refers to the USB port that caused the issue. A few pieces of advice:

• Verify that the device is working properly on another computer.
• Check whether the device is working correctly on another USB port.
• Check your cables: 90% of such issues are caused by bad cables. Switching for another cable could very well solve the issue.
• Check your connectors: This is a common issue on old computers where oxidization has settled on the USB port pins. You could try removing it by inserting and removing the USB plug repeatedly. Warning: Don’t overdo it — USB connectors can and will break if you do.

I also doubt that GNOME has anything to do with the actual issue. It’s far more probable that installing a windowing system merely hides the error message. It’s probably still there in your dmesg output or the system logs.

It would help if you mentioned which USB device (make and model) causes this problem. Some devices are notorious for being rather unreliable.

Источник