Linux write permission to all

How can I give write-access of a folder to all users in linux?

I installed apache2 on Ubuntu just now, and noticed that the /var/www folder is protected. I can just sudo everything but I would rather just give it write access. How can I do this? I tried sudo chmod 7777 /var/www but it didn’t work.

Is this a publicly accessible server, or does it have no direct connection to the internet? If the former it is important that you consider security decisions — servers on the internet are constantly under attack (have a look in your /var/log/messages or equivalent).

8 Answers 8

To best share with multiple users who should be able to write in /var/www , it should be assigned a common group. For example the default group for web content on Ubuntu and Debian is www-data . Make sure all the users who need write access to /var/www are in this group.

Then set the correct permissions on /var/www.

sudo chgrp -R www-data /var/www sudo chmod -R g+w /var/www 

Additionally, you should make the directory and all directories below it «set GID», so that all new files and directories created under /var/www are owned by the www-data group.

sudo find /var/www -type d -exec chmod 2775 <> \; 

Find all files in /var/www and add read and write permission for owner and group:

sudo find /var/www -type f -exec chmod ug+rw <> \; 

You might have to log out and log back in to be able to make changes if you’re editing permission for your own account.

That is how you give access to it. It’s quicker to copy and paste the commands than try to navigate through a GUI file manager’s dialogs to do the same thing. Long term it helps you if you read the manual pages for chmod and chgrp, at least («man chmod»).

+1 for guid to force apache permissions. works well with umask of 027. If something needs writes access, it’s as easy as chmod g+w dir/

There’s a simpler way to do this, try doing this command.

Essentially, the chmod command alters permissions and the -R switch affects all users. Then it is simply giving the correct permissions to use.

You can also replicate what jtimberman suggested using access control lists. The setfacl command accepts -s to replace an existing ACL or -m to modify it; -R to make directory ACLs recursive; and -d to make the specified settings the default, which is useful if you’re anticipating forthcoming user accounts.

Читайте также:  Install full linux on android

These just set the permissions as you would for the user, group, other, and mask using chmod:

setfacl -m u::rwx, g::r-x, o::---, m:rwx DIRECTORY 

And this could be how you’d do it for a specified user or his/her group:

setfacl -m u:USERNAME:rwx, g:USERNAME:r-x DIRECTORY 

And of course, the strength is that you can designate any specific user, multiple users, etc., all without having to modify your group settings. And unlike chmod, if you want some groupies to have access to one directory and other groupies to have access only to another, it’s actually possible with setfacl. Finally, to view a directory’s ACLs, run getfacl:

And you can specify -R to see the ACLs for subdirectories or -d to see the defaults.

Источник

File Permissions in Linux / Unix: How to Read, Write & Change?

Linux is a clone of UNIX, the multi-user operating system which can be accessed by many users simultaneously. Linux can also be used in mainframes and servers without any modifications. But this raises security concerns as an unsolicited or malign user can corrupt, change or remove crucial data. For effective security, Linux divides authorization into 2 levels.

In this Linux file commands tutorial, you will learn-

The concept of Linux File permission and ownership is crucial in Linux. Here, we will explain Linux permissions and ownership and will discuss both of them. Let us start with the Ownership.

Click here if the video is not accessible

Linux File Ownership

Every file and directory on your Unix/Linux system is assigned 3 types of owner, given below.

User

A user is the owner of the file. By default, the person who created a file becomes its owner. Hence, a user is also sometimes called an owner.

Group

A user- group can contain multiple users. All users belonging to a group will have the same Linux group permissions access to the file. Suppose you have a project where a number of people require access to a file. Instead of manually assigning permissions to each user, you could add all users to a group, and assign group permission to file such that only this group members and no one else can read or modify the files.

Other

Any other user who has access to a file. This person has neither created the file, nor he belongs to a usergroup who could own the file. Practically, it means everybody else. Hence, when you set the permission for others, it is also referred as set permissions for the world.

Now, the big question arises how does Linux distinguish between these three user types so that a user ‘A’ cannot affect a file which contains some other user ‘B’s’ vital information/data. It is like you do not want your colleague, who works on your Linux computer, to view your images. This is where Permissions set in, and they define user behavior.

Читайте также:  Менеджеры сети для linux

Let us understand the Permission system on Linux.

Linux File Permissions

Every file and directory in your UNIX/Linux system has following 3 permissions defined for all the 3 owners discussed above.

  • Read: This permission give you the authority to open and read a file. Read permission on a directory gives you the ability to lists its content.
  • Write: The write permission gives you the authority to modify the contents of a file. The write permission on a directory gives you the authority to add, remove and rename files stored in the directory. Consider a scenario where you have to write permission on file but do not have write permission on the directory where the file is stored. You will be able to modify the file contents. But you will not be able to rename, move or remove the file from the directory.
  • Execute: In Windows, an executable program usually has an extension “.exe” and which you can easily run. In Unix/Linux, you cannot run a program unless the execute permission is set. If the execute permission is not set, you might still be able to see/modify the program code(provided read & write permissions are set), but not run it.

File Permissions in Linux/Unix

Let’s see file permissions in Linux with examples:

ls – l on terminal gives

File Permissions in Linux/Unix

Here, we have highlighted ‘-rw-rw-r–‘and this weird looking code is the one that tells us about the Unix permissions given to the owner, user group and the world.

Here, the first ‘‘ implies that we have selected a file.p>

Else, if it were a directory, d would have been shown.

File Permissions in Linux/Unix

The characters are pretty easy to remember.

r = read permission
w = write permission
x = execute permission
= no permission

Let us look at it this way.

The first part of the code is ‘rw-‘. This suggests that the owner ‘Home’ can:

  • Read the file
  • Write or edit the file
  • He cannot execute the file since the execute bit is set to ‘-‘.

By design, many Linux distributions like Fedora, CentOS, Ubuntu, etc. will add users to a group of the same group name as the user name. Thus, a user ‘tom’ is added to a group named ‘tom’.

The second part is ‘rw-‘. It for the user group ‘Home’ and group-members can:

The third part is for the world which means any user. It says ‘r–‘. This means the user can only:

File Permissions in Linux/Unix

Changing file/directory permissions in Linux Using ‘chmod’ command

Say you do not want your colleague to see your personal images. This can be achieved by changing file permissions.

We can use the ‘chmod’ command which stands for ‘change mode’. Using the command, we can set permissions (read, write, execute) on a file/directory for the owner, group and the world.

chmod permissions filename

There are 2 ways to use the command –

Читайте также:  Пароль вай фай через линукс

Absolute(Numeric) Mode in Linux

In this mode, file permissions are not represented as characters but a three-digit octal number.

The table below gives numbers for all for permissions types.

Number Permission Type Symbol
0 No Permission
1 Execute –x
2 Write -w-
3 Execute + Write -wx
4 Read r–
5 Read + Execute r-x
6 Read +Write rw-
7 Read + Write +Execute rwx

Let’s see the chmod permissions command in action.

File Permissions in Linux/Unix

In the above-given terminal window, we have changed the permissions of the file ‘sample to ‘764’.

File Permissions in Linux/Unix

‘764’ absolute code says the following:

  • Owner can read, write and execute
  • Usergroup can read and write
  • World can only read

This is shown as ‘-rwxrw-r–

This is how you can change user permissions in Linux on file by assigning an absolute number.

Symbolic Mode in Linux

In the Absolute mode, you change permissions for all 3 owners. In the symbolic mode, you can modify permissions of a specific owner. It makes use of mathematical symbols to modify the Unix file permissions.

Operator Description
+ Adds a permission to a file or directory
Removes the permission
= Sets the permission and overrides the permissions set earlier.

The various owners are represented as –

User Denotations
u user/owner
g group
o other
a all

We will not be using permissions in numbers like 755 but characters like rwx. Let’s look into an example

File Permissions in Linux/Unix

Changing Ownership and Group in Linux

For changing the ownership of a file/directory, you can use the following command:

In case you want to change the user as well as group for a file or directory use the command

File Permissions in Linux/Unix

In case you want to change group-owner only, use the command

chgrp group_name filename

chgrp’ stands for change group.

File Permissions in Linux/Unix

Tip

  • The file /etc/group contains all the groups defined in the system
  • You can use the command “groups” to find all the groups you are a member of

File Permissions in Linux/Unix

File Permissions in Linux/Unix

Summary:

  • Linux being a multi-user system uses permissions and ownership for security.
  • There are three user types on a Linux system viz. User, Group and Other
  • Linux divides the file permissions into read, write and execute denoted by r,w, and x
  • The permissions on a file can be changed by ‘chmod’ command which can be further divided into Absolute and Symbolic mode
  • The ‘chown’ command can change the ownership of a file/directory. Use the following commands: chown user file or chown user:group file
  • The ‘chgrp’ command can change the group ownership chrgrp group filename
  • What does x – eXecuting a directory mean? A: Being allowed to “enter” a dir and gain possible access to sub-dirs.

Источник

Оцените статью
Adblock
detector