Linux write permissions to file

Classic SysAdmin: Understanding Linux File Permissions

Although there are already a lot of good security features built into Linux-based systems, one very important potential vulnerability can exist when local access is granted – – that is file permission-based issues resulting from a user not assigning the correct permissions to files and directories. So based upon the need for proper permissions, I will go over the ways to assign permissions and show you some examples where modification may be necessary.

Permission Groups

Each file and directory has three user based permission groups:

• owner – The Owner permissions apply only to the owner of the file or directory, they will not impact the actions of other users.
• group – The Group permissions apply only to the group that has been assigned to the file or directory, they will not affect the actions of other users.
• all users – The All Users permissions apply to all other users on the system, this is the permission group that you want to watch the most.

Permission Types

Each file or directory has three basic permission types:

• read – The Read permission refers to a user’s capability to read the contents of the file.
• write – The Write permissions refer to a user’s capability to write or modify a file or directory.
• execute – The Execute permission affects a user’s capability to execute a file or view the contents of a directory.

Viewing the Permissions

You can view the permissions by checking the file or directory permissions in your favorite GUI File Manager (which I will not cover here) or by reviewing the output of the “ls -l” command while in the terminal and while working in the directory which contains the file or folder.

The permission in the command line is displayed as: _rwxrwxrwx 1 owner:group

1. User rights/Permissions
   1. The first character that I marked with an underscore is the special permission flag that can vary.
   2. The following set of three characters (rwx) is for the owner permissions.
   3. The second set of three characters (rwx) is for the Group permissions.
   4. The third set of three characters (rwx) is for the All Users permissions.

   Modifying the Permissions

   When in the command line, the permissions are edited by using the command chmod. You can assign the permissions explicitly or by using a binary reference as described below.

   Explicitly Defining Permissions

   To explicitly define permissions you will need to reference the Permission Group and Permission Types.

   The Permission Groups used are:

   The potential Assignment Operators are + (plus) and – (minus); these are used to tell the system whether to add or remove the specific permissions.

   The Permission Types that are used are:

   So for example, let’s say I have a file named file1 that currently has the permissions set to _rw_rw_rw, which means that the owner, group, and all users have read and write permission. Now we want to remove the read and write permissions from the all users group.

   To make this modification you would invoke the command: chmod a-rw file1
   To add the permissions above you would invoke the command: chmod a+rw file1

   As you can see, if you want to grant those permissions you would change the minus character to a plus to add those permissions.

   Using Binary References to Set permissions

   Now that you understand the permissions groups and types this one should feel natural. To set the permission using binary references you must first understand that the input is done by entering three integers/numbers.

   A sample permission string would be chmod 640 file1, which means that the owner has read and write permissions, the group has read permissions, and all other user have no rights to the file.

   The first number represents the Owner permission; the second represents the Group permissions; and the last number represents the permissions for all other users. The numbers are a binary representation of the rwx string.

   You add the numbers to get the integer/number representing the permissions you wish to set. You will need to include the binary permissions for each of the three permission groups.

   So to set a file to permissions on file1 to read _rwxr_____, you would enter chmod 740 file1.

   Owners and Groups

   I have made several references to Owners and Groups above, but have not yet told you how to assign or change the Owner and Group assigned to a file or directory.

   You use the chown command to change owner and group assignments, the syntax is simple

   chown owner:group filename,

   so to change the owner of file1 to user1 and the group to family you would enter chown user1:family file1.

   Advanced Permissions

   The special permissions flag can be marked with any of the following:

   • _ – no special permissions
   • d – directory
   • l– The file or directory is a symbolic link
   • s – This indicated the setuid/setgid permissions. This is not set displayed in the special permission part of the permissions display, but is represented as a s in the read portion of the owner or group permissions.
   • t – This indicates the sticky bit permissions. This is not set displayed in the special permission part of the permissions display, but is represented as a t in the executable portion of the all users permissions

   Setuid/Setgid Special Permissions

   The setuid/setguid permissions are used to tell the system to run an executable as the owner with the owner’s permissions.

   Be careful using setuid/setgid bits in permissions. If you incorrectly assign permissions to a file owned by root with the setuid/setgid bit set, then you can open your system to intrusion.

   You can only assign the setuid/setgid bit by explicitly defining permissions. The character for the setuid/setguid bit is s.

   So do set the setuid/setguid bit on file2.sh you would issue the command chmod g+s file2.sh.

   Sticky Bit Special Permissions

   The sticky bit can be very useful in shared environment because when it has been assigned to the permissions on a directory it sets it so only file owner can rename or delete the said file.

   You can only assign the sticky bit by explicitly defining permissions. The character for the sticky bit is t.

   To set the sticky bit on a directory named dir1 you would issue the command chmod +t dir1.

   When Permissions Are Important

   To some users of Mac- or Windows-based computers, you don’t think about permissions, but those environments don’t focus so aggressively on user-based rights on files unless you are in a corporate environment. But now you are running a Linux-based system and permission-based security is simplified and can be easily used to restrict access as you please.

   So I will show you some documents and folders that you want to focus on and show you how the optimal permissions should be set.

   • home directories– The users’ home directories are important because you do not want other users to be able to view and modify the files in another user’s documents of desktop. To remedy this you will want the directory to have the drwx______ (700) permissions, so lets say we want to enforce the correct permissions on the user user1’s home directory that can be done by issuing the command chmod 700 /home/user1.
   • bootloader configuration files– If you decide to implement password to boot specific operating systems then you will want to remove read and write permissions from the configuration file from all users but root. To do you can change the permissions of the file to 700.
   • system and daemon configuration files– It is very important to restrict rights to system and daemon configuration files to restrict users from editing the contents, it may not be advisable to restrict read permissions, but restricting write permissions is a must. In these cases it may be best to modify the rights to 644.
   • firewall scripts – It may not always be necessary to block all users from reading the firewall file, but it is advisable to restrict the users from writing to the file. In this case the firewall script is run by the root user automatically on boot, so all other users need no rights, so you can assign the 700 permissions.

   Other examples can be given, but this article is already very lengthy, so if you want to share other examples of needed restrictions please do so in the comments.

   Источник

   How do I give write permission to file in Linux?

   How can I (programmatically) give write permission on a file to a particular user in Linux? Like, for example, its owner? Everyone has read access to this file.

   This is not off-topic. This is a specific programming problem. The question is not stellar, but it’s not off-topic.

   5 Answers 5

   In a shell or shell script simply use:

   This only modifies the write bit for the user, all other flags remain untouched.

   If you want to do it in a C program, you need to use:

   int chmod(const char *path, mode_t mode); 

   First query the existing mode via

   int stat(const char *path, struct stat *buf); 

   . and just set the write bit by doing newMode = oldMode | S_IWUSR . See man 2 chmod and man 2 stat for details.

   If you are setting it, you can skip querying the current one and ORing the mode, and directly use chmod(path, 0666); .

   @Delan Azabani: The poster said: «give write permission of a file to a particular user». Your code would give everyone write access which is probably not what the poster wanted. If you want to preserve the access modes for group and other you must query the current mode and OR with the desired flag.

   Gah, I made a mistake, sorry. Sorry, I meant chmod(path, 0644); , which should do what is expected. I interpreted the «But, which can be accessed and read by any other user.» part as a green light to resetting the group and other modes.

   The octal mode 644 will give the owner read and write permissions, and just read permissions for the rest of the group, as well as other users.

   read = 4 write = 2 execute = 1 owner = read | write = 6 group = read = 4 other = read = 4 

   The basic syntax of the command to set the mode is

   #include chmod("[file name]", 0644); 

   The problem here is that you’re also modifying the flags for group and others. That may or may not be what the poster wants, it isn’t exactly clear from his question. But in your C example you’re using mode 0666 instead of the 0644 you’ve proposed earlier. That would give everyone write access which most likely is not what the poster wanted.

   Again, sorry, I made a mistake there; fixed. I interpreted the «But, which can be accessed and read by any other user.» part as a green light to resetting the group and other modes.

   @Delan Azabani: Yes, you might be right here, I’ve overlooked that part. The question really should have been more specific.

   Источник

   Читайте также:  Xrandr установка разрешения astra linux