Listing all devices in linux

How do I list all devices in Linux?

The best way to list anything in Linux is to remember the following ls commands:

1. ls: List files in the file system.
2. lsblk: List block devices (for example, the drives).
3. lspci: List PCI devices.
4. lsusb: List USB devices.
5. lsdev: List all devices.

How do I find devices on Linux?

16 Commands to Check Hardware Information on Linux

1. lscpu. The lscpu command reports information about the cpu and processing units.
2. lshw – List Hardware.
3. hwinfo – Hardware Information.
4. lspci – List PCI.
5. lsscsi – List scsi devices.
6. lsusb – List usb buses and device details.
7. Inxi.
8. lsblk – List block devices.

How do I list blocked devices?

The block devices on a system can be discovered with the lsblk (list block devices) command. Try it in the VM below. Type lsblk at the command prompt and then press Enter.

How do I know how many cores I have in Linux?

You can use one of the following command to find the number of physical CPU cores including all cores on Linux:

1. lscpu command.
2. cat /proc/cpuinfo.
3. top or htop command.
4. nproc command.
5. hwinfo command.
6. dmidecode -t processor command.
7. getconf _NPROCESSORS_ONLN command.

What devices use Linux?

Linux Is a Versatile, Open Source Operating System Today, a small number of computer users use Linux operating systems compared to Microsoft Windows and Apple OS X users. Linux is, however, embedded in other electronic devices such as TVs, watches, servers, cameras, routers, printers, fridges, and even cars.

What kind of device is a Linux?

Linux-based devices or Linux devices are computer appliances that are powered by the Linux kernel and possibly parts of the GNU operating system. Device manufacturers’ reasons to use Linux may be various: low cost, security, stability, scalability or customizability.

What are block devices in Linux?

Block devices are characterized by random access to data organized in fixed-size blocks. Examples of such devices are hard drives, CD-ROM drives, RAM disks, etc. To simplify work with block devices, the Linux kernel provides an entire subsystem called the block I/O (or block layer) subsystem.

How do I access a blocked device in Linux?

What is Linux command that lists only USB storage devices?

How do I Mount USB in Linux?

How do I boot from USB in Linux?

What is loop device in Linux?

Источник

linux list devices

In Linux various special files can be found under the directory /dev . These files are called device files and behave unlike ordinary files. The most common types of device files are for block devices and character devices.

How much RAM do I have Linux?

To see the total amount of physical RAM installed, you can run sudo lshw -c memory which will show you each individual bank of RAM you have installed, as well as the total size for the System Memory. This will likely presented as GiB value, which you can again multiply by 1024 to get the MiB value.

How do I see devices on Linux?

1. The mount Command. .
2. The lsblk Command. .
3. The df Command. .
4. The fdisk Command. .
5. The /proc Files. .
6. The lspci Command. .
7. The lsusb Command. .
8. The lsdev Command.

How do I create a device on Linux?

1. Build the driver by using Makefile ( sudo make )
2. Load the driver using sudo insmod.
3. Check the device file using ls -l /dev/ . By this time device file is not created for your driver.
4. Create a device file using mknod and then check using ls -l /dev/ .

What are the two types of device files?

Does Linux have a device manager?

There are endless Linux command-line utilities that show the details of your computer’s hardware. . It’s like Windows Device Manager for Linux.

How do I check my RAM size?

Right-click your taskbar and select “Task Manager” or press Ctrl+Shift+Esc to open it. Click the “Performance” tab and select “Memory” in the left pane. If you don’t see any tabs, click “More Details” first. The total amount of RAM you have installed is displayed here.

How much RAM does Windows 10 take up?

In regards to Windows 10 RAM requirements, nowadays most basic Windows 10 systems comes with 4GB of RAM. Especially if you intend to run a 64-bit Windows 10 operating system, 4GB RAM is the minimum requirement. With a 4GB RAM, the Windows 10 PC performance will be boosted.

How much RAM do you need for Ubuntu?

Can Ubuntu run on 1gb RAM? The official minimum system memory to run the standard installation is 512MB RAM (Debian installer) or 1GB RA< (Live Server installer). Note that you can only use the Live Server installer on AMD64 systems. Once again, these are the bare minimum specifications.

Why do people use Linux?

1. High security. Installing and using Linux on your system is the easiest way to avoid viruses and malware. The security aspect was kept in mind when developing Linux and it is much less vulnerable to viruses compared to Windows.

Does Apple use Linux?

Both macOS—the operating system used on Apple desktop and notebook computers—and Linux are based on the Unix operating system, which was developed at Bell Labs in 1969 by Dennis Ritchie and Ken Thompson.

Curl

cURL is a PHP extension, that allows us to receive and send information via the URL syntax. By doing so, cURL makes it easy to communicate between dif.

Install

How to Install OCS Inventory Asset Management Software CentOS 8Prerequisites.Getting Started.Install Apache, MariaDB, and PHP.Configure MariaDB Databa.

Comment

Unlike other programming languages Python doesn’t support multi-line comment blocks out of the box. The recommended way to comment out multiple lines .

Latest news, practical advice, detailed reviews and guides. We have everything about the Linux operating system

Источник

How to List all Linux Disk Devices

How to list disk devices in Linux with lsblk

The proper way to list block devices such as hard disks is using the command lsblk.

Note: the -a flag forces lsblk to list also empty devices.

In the first column you can see all the connected devices, in the image above you can see 3 devices: sda, sdc and sdd. Lets see some information on each.

Lsblk, The column NAME:

The NAME column shows the name of each disk device and partition. As you can see in the extract of the column below the disk SDA contains 4 partitions: sda1, sda2, sda3 and sda4. You can ignore the “_crypt_” for now.

The second listed disk device is sdc with only one partition, sdc1.

The second listed disk device is sdd with only one partition, sdd1.

The last listed device is the DVD or CDROM:

Lsblk, The column MAJ:MIN:

Following the column NAME there is the column MAJ:MIN is the internal identificator for each device the kernel uses according to the device type.

Lsblk, The column RM:

The column RM shows if the device is removable (where 1 yes and 0 no), in this case last 2 disk are external and the last device is the DVD.

Lsblk, The column SIZE:

The column SIZE displays the size of each of the disk devices listed.

Lsblk, The column RO:

The column RO means Read Only, being 1 positive and 0 negative, if 0 then devices are not read only, if 1, they are read-only.

Lsblk, The column TYPE:

The column TYPE displays the type of device such as devices, partitions, optical devices, encrypted partitions and more.

Lsblk, The column MOUNTPOINT:

The column MOUNTPOINT shows the mount point of each device or partition, the next image shows the partitions of the device sda.

The screenshot below shows an efi partition belonging to sda1, the encrypted sda2 root partition, the sda3 for boot and an encrypted sda4 SWAP.

The flag -l will show the devices and partition as a list rather than as tree:

The flag -f instructs lsblk to inform the filesystem of each partition:

Additional flags for the command lsblk are available and explained in the man page which you can also access at https://linux.die.net/man/8/lsblk.

Listing disk devices in Linux with alternative methods: fdisk and fstab

While the correct way to list disk devices in Linux is using the command lsblk, other options are available.
The first one to try is fdisk, to list all block devices with fdisk run:

How to show free and used space in Linux disk devices

Additionally to listing your storage devices you may need to show the free and used space, this can be achieved using the command df.

As you see in the screenshot below, the availability of space of all disks formerly listed is now displayed.

The command df allows you to easily check each partition identified both by its device name or its mountpoint, yet, the -h option makes it easier to be readed by humans.

For example the image above shows the partition /dev/sda2_crypt which is the root mount point / has 150 GB available and 64 GB used.

About the author

David Adams

David Adams is a System Admin and writer that is focused on open source technologies, security software, and computer systems.

Источник

Find all storage devices attached to a Linux machine [closed]

I have a need to find all of the writable storage devices attached to a given machine, whether or not they are mounted. The dopey way to do this would be to try every entry in /dev that corresponds to a writable devices ( hd* and sd* ). Is there a better solution, or should I stick with this one?

Since you talk about them maybe being mounted, I guess you want a list of partitions, not just of disks?

partitions are fine, too, yes 🙂 .. if I know the partitions, I’ll also know what physical devices are available

@warren — oh no. They still should be closed. As you as the post owner want this moved you should flag it for moderator attention. The fact that you want it moved will carry some weight.

7 Answers 7

/proc/partitions will list all the block devices and partitions that the system recognizes. You can then try using file -s to determine what kind of filesystem is present on the partition, if any.

There’s kind of a limit on what you can do from a shell. Most of the other suggestions that are higher rated either don’t work from a shell, won’t work unless dbus is running, or will list devices that aren’t actually present/configured. This is just faster than checking all the /dev devices.

You can always do fdisk -l which seems to work pretty well, even on strange setups such as EC2 xvda devices.

Here is a dump for a m1.large instance:

root@ip-10-126-247-82:~# fdisk -l Disk /dev/xvda1: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders, total 20971520 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvda1 doesn't contain a valid partition table Disk /dev/xvda2: 365.0 GB, 365041287168 bytes 255 heads, 63 sectors/track, 44380 cylinders, total 712971264 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvda2 doesn't contain a valid partition table Disk /dev/xvda3: 939 MB, 939524096 bytes 255 heads, 63 sectors/track, 114 cylinders, total 1835008 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvda3 doesn't contain a valid partition table 

root@ip-10-126-247-82:~# mount /dev/xvda1 on / type ext4 (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/xvda2 on /mnt type ext3 (rw) 

root@ip-10-126-247-82:~# cat /proc/partitions major minor #blocks name 202 1 10485760 xvda1 202 2 356485632 xvda2 202 3 917504 xvda3 

Side Note

How fdisk -l works is something I would love to know myself.

Источник