Make a patch linux

How to create a patch for a whole directory to update it?

I know there are several threads on this already, but no one has fully explained exactly how to perform the initial diff to create the patch file, then how to apply that patch to the initial directory to update it. In my case, there is a directory of files that anyone can download from the web. I have taken that directory and made changes to it, and want to create a patch file such that others can apply it to the downloaded directory to reproduce exactly what I have in my modified directory. Help? What do I need to tell the other person with respect to how to apply my patch?

4 Answers 4

I just had this same problem — lots of advice on how to half do it. Well, here is what I did to get both the patching and unpatching to work:

1. Put copies of both directories in say /tmp, so we can create the patch file, or if brave, get them side by side — in one directory.
2. Run an appropriate diff on the two directories, old and new:

diff -ruN orig/ new/ > file.patch # -r == recursive, so do subdirectories # -u == unified style, if your system lacks it or if recipient # may not have it, use "-c" # -N == treat absent files as empty 

If a person has the orig/ directory, they can recreate the new one by running patch.

To Recreate the new folder from old folder and patch file:

1. Move the patch file to a directory where the orig/ folder exists
2. This folder will get clobbered, so keep a backup of it somewhere, or use a copy.

mv orig/ new/ # if the folder names are different 

I’m a mac guy so no idea. What you have to do is check the options for patch and diff on Cygwin. That’s why I added the comments above on what the options mean — so if one or the other program offers different options you can figure out what to change to get it to work. Conceptually all patch/diff programs should support the functionality.

@CharanPai «diff» does not support binary files, so I assume not. You might be able to create your own command file wrapper to do this. What you would do is binhex your binary data files — create a text file for each in binhex or similar ascii format. Then diff those files, and after the patch is applied, unbinhex the (possibly revised) binhex file bad into binary.

@DavidH is it possible to omit those outer directory names? Or is it neccessary that patch should contain new and orig directory names?

patch was patching the new/ not orig/ directory for me, but I found the -d option which allows you to say cd into that directory first before applying the patch and then you can adjust the -p N argument accordingly.

I needed to create a patch file and send it to someone so they could update their directory to match mine. There are many caveats with diff and patch however, so it ended up taking me hours to figure out something so conceptually simple. Absolute paths seem to be preferred over relative paths, and many of the options seem to have evolved from niche use cases. I finally figured out a solution based on David H’s answer, with additional tips from Lakshmanan Ganapathy):

• Back up your directory to directory.orig
• Modify your directory to reach the desired state
• Save diff from directory.orig to directory in file.patch so name matches for recipient

# to create patch: # copy backup to something like .orig alongside it cp -r / /.orig # create/update/delete files/folders in until desired state is reached # change working directory to cd / # create patch file alongside diff -Naru ../.orig . > ../file.patch # -N --new-file Treat absent files as empty. # -a --text Treat all files as text. # -r --recursive Recursively compare any subdirectories found. # -u -U NUM --unified[=NUM] Output NUM (default 3) lines of unified context. # to apply patch: # change working directory to cd / patch -s -p0 < /file.patch # -s or --silent or --quiet Work silently, unless an error occurs. # -pN or --strip=N Strip smallest prefix containing num leading slashes from files. # to undo patch (note that directories created by patch must be removed manually): # change working directory to cd / patch -Rs -p0 < /file.patch # -R or --reverse Assume that patch was created with the old and new files swapped. # -s or --silent or --quiet Work silently, unless an error occurs. # -pN or --strip=N Strip smallest prefix containing num leading slashes from files. 

Источник

How to Run “patch” Command in Linux?

The “patch” is a command for adding patch files to source code or text files. It takes input as a patch file and applies differences to original files. We use the “diff” tool to get the difference.

The “diff” is abbreviated as “differences” and is used to compare the content of two files and list the changes in standard output.

A set of source codes makes up a piece of software. Developers build the source code that evolves over time. Getting a new file for each update is unrealistic or time-consuming. Therefore, the safest method is to distribute improvements only. The modifications are made to the old file, and then a new or patched file is created for the new software version.

This guide shows you how to use the “diff” command to generate a patch file and then apply it with the “patch” command.

Syntax:

The syntax of the “patch” command is as follows:

$ patch [ options ] [ originalfile [ patchfile ] ]

Creating a Patch File Using “diff”:

Source Code File 1:

Firstly, two different versions of a source code are required to create a patch file. The source code file I have created is named as “myfile.c”:s

Source Code File 2:

Now, copy the content of myfile.c in the new_myfile.c, using:

Make some changes in the newly-created file:

Checking Difference:

Let’s create a patch file named as myfile.patch:

You can print the patch file by executing the command below:

Applying the Patch File:

Ensure that the patch file is in the directory where the source code file is placed.

Take a Backup Before Applying Patch:

Use “-b” option to build a backup of the patch file:

Setting Backup File Version

If you need multiple backups of a single backup file, then use the “-V” option. It sets the version number of each backup file. Execute the command given below:

Validate Patch Files

If you want to verify or observe the outcome of patching, then use “–dry-run” option. It does not make any modification to the original file:

Reverse/Undo a Patch

The “-R” option is used to reverse or undo a patch that has already been applied.

Conclusion:

In Linux operating system, “patch” is a command that allows us to apply patch files to the source codes or configuration files. The patch file is used for software updating purposes. The difference between the original and new files is held in patch files and the “diff” command is used to get the difference or patch. We discussed the usage of the “diff” and the “patch” commands with a number of options such as making backups, dry-running, and reversing the applied patch.

About the author

Aqsa Maqbool

As a Software engineer, I am passionate to write about various IT related
articles but have deep interest in Linux. I spend most of my time reading Linux related blogs and IT related books. I want to serve the world with my writing skills.

Источник

HowTo: Create Patch Using Diff Command – Linux

If you have made some changes to the code and you would like to share these changes with others – the best way is to provide them as a patch file.

diff is the Linux command line tool that is used for creating patches (sometimes called diffs) and requires that you have two copies of the code: one with your changes and one without.

This article explains how to create a patch for a single file or for a whole directory using diff and how to apply this patch after.

Create a Patch for a Single File in Linux

Let’s say you have some original file.

You make some changes in it and save the result to a new updated file.

Cool Tip: Have forgotten the meaning of some term in Git? Not a problem! Simply read and bookmark this article! This article →

To create a patch file containing the changes you’ve made, run the following command:

$ diff -u OriginalFile UpdatedFile > PatchFile

Apply a Patch to a File

A person, who has the original file and wants to apply the changes you’ve made, can patch the original file with the below command:

Now the original file has the same content as the updated file.

Undo a Patch

To revert a previously applied to a file patch, use this command:

Create a Patch for a Directory in Linux

You recursively copy its content to some new directory and do the necessary updates in it.

To create a patch file containing the modifications you’ve made, run the following command:

$ diff -ruN OriginalDir UpdatedDir > PatchFile

Option	Description
-r	Recursively compare any subdirectories found
-u	Create a diff file in the unified format
-N	Treat absent files as empty

Apply a Patch to a Directory

A person, who has the original directory and wants to apply the changes you’ve made, has to copy the original directory and the patch file to some location (e.g. /tmp ), go to that location and apply the patch with this command:

Option	Description
-p0	Apply the patch to the same directory structure as when the patch was created

Now the original directory contains the content of the updated directory.

Undo a Patch

Cool Tip: Trouble with a file character encoding? Find out how to fix it! Read more →

To revert a previously applied to a directory patch, use this command:

Источник