Make your home wifi

Make Your Home WiFi-Ready with Setup Tips

Frustrated by the lost wifi connection? Many users often say the same. As they face the issue of slow internet frequently. No worries, we have one after another great tip for you.

Basic Conditions of Linksys Setup

The first thing is to have a Linksys extender and an active network for attachment.

Without them, you can’t do the Linksys Re6400 setup or any other Velop model setup.

In addition, you need an ethernet or USB String To Connect the router to the Computer.

There are several other options available similar to WiFi.

It may work well in some cases.

Prerequisites For Your Extender Setup

Connect the extender to a power outlet in between the range of your router or access point.

But you may need all these things before starting with the Linksys RE7000 setup or other Linksys extender model setup.

• You may need an extension cord. Though don’t connect them to a power outlet in a distant room, If you have multiple extenders.
• Power on the ‘On’ button on each of them (nodes and modem).
• Now, wait for the lights to turn on. In case they don’t, try again after checking the power outlet and power cycling both the extender and the router.
• To perform a power cycle, open them from their power source and stay 30 seconds before plugging them back by.
• Now that you’ve connected to the device, it’s time to check to see if they’re getting enough power.
• Ensure that the modem or the router is plugged well into the power socket.
• You should see a light on the front of your device that indicates whether it has power or not.
• Still try plugging them directly into their separate outlets, If this isn’t the case.
• Make sure no other electrical biases are plugged near them.
• All this is happening because these devices are facing trouble. While entering signals due to destruction caused by near electronic things.
• Therefore, try to stop all of your electronic devices for 30 seconds.
• If you still can’t get the device working correctly even after making changes, Then, just plug back everything again.
• This generally fixes all the issues with connection strength at home.

The Device Should Support a 5 GHz Network

• Check if your device supports a 5 GHz network or not. However, it’ll not be suitable to connect to Linksys WiFi Extender Network, If your device isn’t suitable to connect to a 5 GHz network.
• Enable the “ 5Ghz band ”option on your Android device like a mobile phone or laptop. Use the 5Ghz band of Linksys WiFi Extender Network.

Note: See the above Setup can even help you in the Linksys RE7000 Setup approach.

Dual Band Support

• You are in connection for sure with many networks at a time. Though the Linksys WiFi Extender supports 2.4 GHz and 5 GHz networks, so may get the most out of your internet connection. It might be necessary if you have a large number of devices that need to be connected to the network at once. Although, if it feels like your router has a hard time handling all of the business from multiple devices, this is one way to fix it!
• If you’re having trouble with your WiFi. A lot of routers only support 2.4 GHz networks connecting signals. This is fine if all of your devices are using 2Ghz connections as well (which probably are), but not so good if they need access to 5Ghz connections rather because there isn’t enough bandwidth available for everyone who wants it at first.
• Linksys WiFi Extender gives you access to both bands without demanding any complicated configuration changes on behalf of yourself or those around you who may otherwise have trouble managing their own device settings correctly!

Change Your Wireless Channel

Try changing your wireless channel, If you’re still having trouble connecting to the network. Some channels are more crowded than others and thus can even distract the channels. To change your wireless channel:

• First, Open the Settings of your channels by swiping down from the top of your screen and tapping Settings.
• Then, Tap Network & Internet> Wi- Fi> Menu icon( upper right)> Advanced options> Channel extents (also known as ‘ WiFi Channels)
• After that, Select some other devices in your area, which are not being used earlier, on a different floor/room. Use one of the channels listed under “Channel widths”, and choose one of them instead.
• In addition, Choose a different channel that isn’t being used by another gadget in your area, or isn’t being used by another device in your area (e.g., if another device on a different bottom/room uses one of the channels listed under “ Channel extents ”, choose one of them rather).

Reset Your Router Settings

If you can’t access the router then, you can reset it to vanish the defaults to clear out all the changes that you may have made earlier. If you have looked up your default address and username/password and you still can’t transfix your router. This is useful for secondary routers or old changes that you can’t flash back.

• This button is generally small and sunken, though can only be used by a paper clip.
• Some routers have a very button fluently to press.
• You will know the router is reset once you see the lights flashing.
• After pressing the reset button, stay 30- 60 seconds and also try entering the router’s address and username/ password combination again.

Adjustment Of the Antennas

You need to adjust the antenna very carefully. If the antennas of the router would not set up properly then, you need to adjust them accordingly. Roll the antennas of the router in every direction and see whether you get the proper signals or not.

We hope the article we have given for your help is informative. But, if you think you are up for something then, you need to write to us in the chat box. Or you can head to linksys extender login and change the credentials as you want. I hope it was easy.

Источник

How to Set Up a Home Wi-Fi Network

Setting up Wi-Fi in your home or office is easier than you may think. All you need is an internet connection from an internet service provider, a modem, a wireless router, and a computer or smartphone. Let’s walk through the steps of setting up your Wi-Fi network.

Part 1: Get an internet connection

You can look up and compare internet service providers (ISPs) in your area with our handy zip check tool.

If you don’t have a home internet connection already, it’s time to get hooked up.

Many providers allow you to sign up online or by calling a customer service representative. One perk to getting a new internet connection set up is that during installation, a professional may set up your whole home network for you.

If you want a detailed walkthrough on how to choose an internet plan, check out our guide to choosing an ISP. But basically, you need to consider availability, speed, and cost.

Part 2: Set up your modem

Your modem is an essential part of your home network. It translates the internet signal that comes into your home from the ISP.

Need a modem for gigabit internet? Check out our guide to the best gigabit modems.

If you receive home networking equipment from your ISP, you may see two devices—a modem and a wireless router—or a single combined modem/router unit called a wireless gateway. To connect your modem or gateway to your home internet connection, find your main internet line.

Cable internet : Your main line is a coaxial outlet or a coaxial cable protruding from the wall .

DSL internet : Your main line looks similar to a phone jack.

Satellite internet : Your main line is probably a coaxial cable or an Ethernet cable.

Fiber internet : If you have fiber direct to your home, your main line goes to an Optical Network Terminal (ONT). From there, the signal goes to a router via an Ethernet cable or a coaxial cable.

Once connected to the internet source and plugged in, check your modem’s status lights. It can take a while for things to come fully online. You may have to call your internet service to activate the modem (basically to make sure the network recognizes the modem).

You can connect a computer directly to your modem with an Ethernet cable to make sure your internet is working properly. But we don’t recommend using a direct modem connection for regular internet use because your other devices can’t access the internet at the same time without a Wi-Fi network. You also bypass the critical security features built into your router when you connect directly to a modem.

Part 3: Set up your wireless router

Your wireless router manages your home network. It creates your Wi-Fi network , assigns IP addresses, organizes traffic, and makes sure all your data goes to where it’s supposed to go. You want to make sure your router supports certain Wi-Fi standards (Wi-Fi 5 or 6) to get the most out of your internet service. There are actually a lot of factors to consider when choosing a router. See our article on the best routers if you need some help making a decision.

Step 1: Connect your wireless router directly to your modem with an Ethernet cable and turn it on.

Step 2: Wait for status lights to show that it’s connected to the internet successfully and that its Wi-Fi network is up and running.

Step 3: Find your wireless router’s default IP address and log in to your router. If you are not sure how to do it, consult our guide on how to log in to your router .

Step 4: In your wireless router’s user interface or app, set up your Wi-Fi network’s name (SSID) and password. If your router has multiple Wi-Fi bands (usually 2.4 GHz and 5 GHz), do this for each.

Step 5: If your wireless router offers more advanced features like scheduling, guest networks, or user profiles, set those up now as well.

Источник

How to Set up a Home Wi-Fi Network

Former Lifewire writer Melanie Uy has 5+ years’ experience writing about consumer-oriented technology and is an expert telecommuter.

Jerrick Leger is a CompTIA-certified IT Specialist with more than 10 years’ experience in technical support and IT fields. He is also a systems administrator for an IT firm in Texas serving small businesses.

• Wi-Fi & Wireless
• The Wireless Connection
• Routers & Firewalls
• Network Hubs
• ISP
• Broadband
• Ethernet
• Installing & Upgrading

What to Know

• Using Ethernet cables, connect the router to the modem, then connect your computer to your router.
• Open a web browser and enter your router’s IP address to configure your Wi-Fi network’s security settings.
• Unplug your computer from the router, then wirelessly connect all of your devices to the new network.

This article explains how to set up a Wi-Fi network using any wireless router and modem.

How to Set Up Your Home Wi-Fi Network

If the wireless router and other devices are capable of Wi-Fi Protected Setup (WPS), you can connect and configure these devices with the push of a button. However, having WPS set up on a router is a security risk, so we recommend disabling WPS.

Here’s how to set up a Wi-Fi router.

1. Find the best location for the wireless router. The optimal placement is in a central location, free from obstructions that could cause wireless interference.

Turn off the modem. Power off the cable, fiber, or DSL modem from your internet service provider before connecting your equipment.

Connect the router to the modem. Plug an Ethernet cable (typically provided with the router) into the router WAN port. Then, connect the other end of the Ethernet cable to the modem.

Connect a laptop or computer to the router. Plug one end of another Ethernet cable into the router LAN port (any port will work) and the other end of the Ethernet cable into the Ethernet port of a laptop. This wiring is temporary; you will remove the cable after setting up the network.

Go to the management web page for the router. Open a browser and enter the IP address of the router administration page. This information is in the router documentation (it’s usually something like 192.168.1.1). The login information is also in the manual.

Add WPA2 security. This step is essential. Find this setting in the wireless security section of the router administration page. Select which type of encryption to use and enter a passphrase of at least eight characters. The more characters and the more complex the password, the better.

WPA2 is significantly more secure than WEP. Use WPA or mixed mode WPA/WPA2 with older wireless adapters. WPA3 is another option for more recent hardware, but its compatibility is limited.

Источник