Manjaro linux установка кодеков

ArchPKGs

How to Install codec2 with Command Line on Arch Linux/Manjaro/RebornOS

3 packages from Extra, Community and extra-testing have the same name ( codec2 ). We’d recommend going with either the packages from the official repositories or an AUR package tested by the community.

Table of Contents

codec2 (Extra) link

«Open source speech codec designed for communications quality speech between 450 and 3200 bit/s» is their description of extra/codec2 . To get this package ( extra/codec2 ) from Arch official repository (Extra) on Arch Linux and Arch-based Linux distros (e.g. Manjaro, EndeavourOS, Anarchy, Garuda, Artix) is pretty simple. This tutorial will show you step-by-step how to install/update/uninstall the package with either the default package manager pacman or an AUR helper (e.g. yay ).

Install extra/codec2 link

Two well known methods are used to install extra/codec2 from Arch official repository (Extra). pacman is the choice for you if you are a seasoned Linux user and understand the concept of how packages are built. If not, yay is a common alternative to install packages without the hassle of reviewing PKGBUILD and build packages with makepkg yourself.

Using Pacman (Default Package Manager) link

sudo pacman -S extra/codec2content_copy

Using Yay (Easier) link

yay -S --repo extra/codec2content_copy

Update extra/codec2 link

Since Arch is a rolling-release Linux distribution, it is required to do a whole system upgrade before updating an official package due to dependency issues.

Using Pacman (Default Package Manager) link

Instruct pacman to perform a whole system upgrade which will update any packages you have installed before:

sudo pacman -Syucontent_copy

Using Yay (Easier) link

Remove extra/codec2 link

Removing packages is the simplest of these three,all you have to do is choose whether to remove the unused dependencies and the configuration files generated by the package.

Using Pacman (Default Package Manager) link

sudo pacman -R codec2content_copy

sudo pacman -Rs codec2content_copy

sudo pacman -Rns codec2content_copy

Using Yay (Easier) link

yay -Rs codec2content_copy

yay -Rns codec2content_copy

codec2 (Community) link

«Open source speech codec designed for communications quality speech between 450 and 3200 bit/s» is the maintainer’s outline of community/codec2 . To install and update this package ( community/codec2 ) from Arch community repository (Community) on Arch Linux, Manjaro, EndeavourOS, ArcoLinux, Artix, Parabola and BlackArch is pretty easy. This guide will taught you how to install, update and remove the package with either the built-in package manager pacman or an AUR helper like yay .

Install community/codec2 link

Two common ways are used to install community/codec2 from Arch community repository (Community). pacman is the way to go if you’re an expert of command-line interface and understand the concept of how packages are built. If not, yay is an acceptable alternative to install packages without the necessity to review PKGBUILD and build packages with makepkg yourself.

Using Pacman (Default Package Manager) link

sudo pacman -S community/codec2content_copy

Using Yay (Easier) link

yay -S --repo community/codec2content_copy

Update community/codec2 link

Since Arch is a rolling-release Linux distribution, It is strongly recommended against updating a community package without doing a whole system upgrade due to safety reason.

Using Pacman (Default Package Manager) link

sudo pacman -Syucontent_copy

Using Yay (Easier) link

Remove community/codec2 link

Compared to installing and updating packages, removing is the most uncomplicated of these three,just choose whether to keep the unused dependencies and the configuration files generated by the package.

Using Pacman (Default Package Manager) link

sudo pacman -R codec2content_copy

sudo pacman -Rs codec2content_copy

sudo pacman -Rns codec2content_copy

Using Yay (Easier) link

yay -Rs codec2content_copy

yay -Rns codec2content_copy

codec2 (extra-testing) link

«Open source speech codec designed for communications quality speech between 450 and 3200 bit/s» is the developer’s profile of extra-testing/codec2 . To get extra-testing/codec2 from Arch official repository (extra-testing) on Arch Linux, Manjaro, EndeavourOS, BlackArch and Parabola is pretty simple. This tutorial will show you step-by-step how to install/update/uninstall the package with either the built-in package manager pacman or an AUR helper (e.g. yay ).

Install extra-testing/codec2 link

There are two typical approaches to install extra-testing/codec2 from Arch official repository (extra-testing). pacman is what you are looking for if you’re a seasoned Linux user and have the knowledge of how packages are built. If not, yay is an acceptable alternative to install packages without the hassle of reviewing PKGBUILD and build packages with makepkg by yourself.

Using Pacman (Default Package Manager) link

sudo pacman -S extra-testing/codec2content_copy

Using Yay (Easier) link

yay -S --repo extra-testing/codec2content_copy

Update extra-testing/codec2 link

Since Arch is a rolling-release Linux distribution, It is strongly recommended against updating an official package without doing a whole system upgrade due to safety reason.

Using Pacman (Default Package Manager) link

sudo pacman -Syucontent_copy

Using Yay (Easier) link

Remove extra-testing/codec2 link

Compared to installing and updating packages, uninstalling is the simplest of these three,just choose whether to keep the dependencies that no longer required by other packages and the configuration files generated by the package.

Using Pacman (Default Package Manager) link

sudo pacman -R codec2content_copy

sudo pacman -Rs codec2content_copy

sudo pacman -Rns codec2content_copy

Using Yay (Easier) link

yay ‘s uninstalling command is just a pacman wrapper, executing with the same parameters simply works:

yay -Rs codec2content_copy

yay -Rns codec2content_copy

More Guides

Beginner’s Guide on sigpy Installation on Arch Linux, Manjaro and ArcoLinux

sigpy is «A package for signal processing, with emphasis on iterative methods.» based on its definition. To install and update sigpy from AUR (Arch User Repository) on Arch Linux and Arch-based distros (e.g. Manjaro, EndeavourOS, ArcoLinux, RebornOS) is pretty uncomplicated. This tutorial will cover how to install, update and remove the package with either the default package manager pacman or an AUR helper like yay.

Beginner’s Tutorial on Installing plantumlqeditor-va-git on Arch Linux, Manjaro and RebornOS

«PlantUML QEditor is a simple editor written in Qt5 for PlantUML (vahanus fork)» is the maintainer’s profile of plantumlqeditor-va-git. To get this package (plantumlqeditor-va-git) from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS, BlackArch, RebornOS and Artix is relatively straightforward. This tutorial will show you step-by-step how to install/update/remove the package with either the default package manager pacman or an AUR helper (e.g. yay).

Installing epson-inkjet-printer-stylus-s21-series with CLI on Arch-Based Linux (Manjaro, RebornOS)

«Epson printer driver (Stylus S21, T21, T24, T27)» is the developer’s outline of epson-inkjet-printer-stylus-s21-series. To install and update epson-inkjet-printer-stylus-s21-series from AUR (Arch User Repository) on Arch Linux and Arch-based Linux distributions (e.g. Manjaro, EndeavourOS, BlackArch, RebornOS, Garuda) is rather straightforward. This guide will cover how to install, update and remove the package with either the built-in package manager pacman or an AUR helper like yay.

How to Install quark-electron-bin (Full Instructions) on Arch Linux, Manjaro and Parabola

Quoting from quark-electron-bin’s own gist, it’s «A cross-platform, integrated development environment for rapidly building — functional , prototypal projects, written in HTML, CSS and JavaScript with native desktop app like capabilities». To install and update this package (quark-electron-bin) from AUR (Arch User Repository) on Arch Linux, Manjaro, EndeavourOS, RebornOS, Parabola and Artix is rather simple. This tutorial will be covering how to install, update and remove the package with either the built-in package manager pacman or an AUR helper (e.g. yay).

Beginner’s Guide on instant-rst Installation on Arch Linux, Manjaro and Artix

instant-rst is «A local server for preview rst document instantly» according to its gist. To install or uninstall instant-rst from AUR (Arch User Repository) on Arch Linux and Arch-based Linux distros (e.g. Manjaro, EndeavourOS, Garuda, RebornOS, ArcoLinux, Anarchy) is rather straightforward. This tutorial will show you step-by-step how to install, update and remove the package with either the built-in package manager pacman or an AUR helper like yay.

A Complete Tutorial on python-pytest-qt Installation on Arch-Based Linux (Manjaro, BlackArch)

According to extra/python-pytest-qt’s own description, it’s «pytest support for PyQt and PySide applications». To install and update this package (extra/python-pytest-qt) from Arch official repository (Extra) on Arch Linux and Arch-based Linux distributions (e.g. Manjaro, EndeavourOS, BlackArch, ArcoLinux) is relatively simple. This guide will taught you how to install, update and remove the package with either the default package manager pacman or an AUR helper like yay.

More guides… copyright 2023 ArchPKGs. All Rights Reserved.

Источник

chromium-ffmpeg

This package provides a chromium-ffmpeg content interface that third-party browser snaps can connect to to get access to a host of proprietary codecs for web content that they might not be allowed to redistribute themselves.

Details for chromium-ffmpeg

License

Last updated

Links

Enable snaps on Manjaro Linux and install chromium-ffmpeg

Snaps are applications packaged with all their dependencies to run on all popular Linux distributions from a single build. They update automatically and roll back gracefully.

Snaps are discoverable and installable from the Snap Store, an app store with an audience of millions.

Enable snapd

Snapd can be installed from Manjaro’s Add/Remove Software application (Pamac), found in the launch menu. From the application, search for snapd, select the result, and click Apply.

Alternatively, snapd can be installed from the command line:

Once installed, the systemd unit that manages the main snap communication socket needs to be enabled:

sudo systemctl enable --now snapd.socket 

To enable classic snap support, enter the following to create a symbolic link between /var/lib/snapd/snap and /snap :

sudo ln -s /var/lib/snapd/snap /snap 

Either log out and back in again, or restart your system, to ensure snap’s paths are updated correctly.

Install chromium-ffmpeg

To install chromium-ffmpeg, simply use the following command:

sudo snap install chromium-ffmpeg

Источник