Маршрутизатор conel bb sr30300110 swh

Features, Applications

LTE cat.3, 3G/HSPA+, GPRS/EDGE, EMEA, 2x SIM
LTE B1, B3, B7, B8, B20
Powerful CPU and Memory, Hosting of SW IoT applications
DIN rail mounting, Sleep mode
5x ETH
GPS, USB, I/O 2x DI + 1x DO, MicroSD
Operating temp. –40 °C to +75 °C, Power supply 10 to 60 V DC
Certifications: CE, UL C1D2/Atex, E8
Advanced networking, Diagnostics, VPN support, Firewall

Document Preview

+ Powerful CPU and enhanced memory + Extended operational temperature range from + 10-60 VDC operation with transient and reverse polarity voltage

protection + Flexible port options � 3-port Switch, Ethernet and RS-232/422/485

serial ports with isolation + GPS and GLONASS support + MicroSD card holder, In/Out, USB Host + Low power consumption mode for solar and battery power applications + Optional industrial grade Wi-Fi + Optional PoE PSE or PoE on ETH0 and ETH1 + Advanced security features

SmartFlexTM cellular router provides secure Internet connectivity for devices and LANs via the cellular networks. It canprovide automatic wireless failover for wired networks, wireless connectivity for devices in remote locations where cable connections are impractical and wireless connectivity for mobile assets. With upload speeds to 50 Mbps and download speeds to 100 Mbps, SmartFlex provides ample bandwidth, even for applications that require video.

SmartFlex places intelligence at the network edge with an extremely powerful Cortex A8 CPU 256 MB flash memory, 512 MB RAM and 128kB M-RAM, providing full support for LTE (Long Term Evolution) speeds and applications.

A secure Web interface allows users to configure and manage SmartFlex from remote locations. The router can also upgrade its configuration and firmware from the operator’s central server, allowing for simultaneous mass reconfiguration of every router on the network. Users may insert Linux scripts and can create multiple configurations for the same router and switch from one configuration to another at any time.

Modular SmartFlex can be configured for any application. Standard configuration includes 2 Ethernet ports with 2 independent LANs/IP addresses and also includes 1 USB host port, 1 microSD card holder, 2 SIM card holders for automatic failover to an alternate service provider, 2 binary inputs(I/O), 1 binary output (I/O) and onboard GPS.

An optional built-in Wi-Fi module is also available, with industrial grade operating temperature ranges from �C LTE450 module). Further optional boards include: 3x ETH (the router can be configured with to 5 total Ethernet ports and 3 independent LANs/IP addresses) or RS-232/485 (isolation strength or RS-232. The SmartFlex supports real time data encryption and the creation of VPN tunnels using IPsec, OpenVPN and L2TP. It supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and numerous other functions, as well as additional software like SmartCluster VPN Server and R-SeeNet.

SmartFlex Family 2x ETH, 1x USB, 2x BI, 1x BO, MicroSD reader, 2x SIM reader

No Accessories (DIN holder included) Accessories with EU power supply International Power Supply (EU, US, UK, AUS)

No optional port 3x ETH Switch RS232 (5-pin TB), RS485/422 (4-pin TB) RS232 (4-pin TB), RS485 (3-pin TB), ETH

Note: Check with your local distributor for availability, options, and HW configuration. Contact Advantech B+B SmartWorx distributors.

Note: Antennas & Power Supply Sold Separately.
All product specifications are subject to change without notice. 12:08 PM

3x ANT — ANT, DIV, GPS (sold separately) Wi-Fi Antenna (sold separately) USB SD Card RST *Optional 3-port SWITCH

RJ45, 10/100 Mbps 2 Mini SIMs (2FF) (rear panel) PWR, DAT, WAN, ETH, SIM, USR, POE, IN0, IN1, OUT

R-SMA connector USB Host connector 2.0 1x Micro SD Card slot (rear panel) RESET button (rear panel) RJ45, 10/100 Mbps RJ45, 4-pin terminal block, 3-pin terminal block connectors � Isolation kV 5-pin terminal block, 4-pin terminal block connectors � Isolation 2.5 kV

Humidity Cold Start Operating Altitude Ingress Protection Rating

Operating: +75 �C Storage: +85 �C Operating: +60 �C Storage: +85 �C Operating: 95 % Storage (Non-condensing): / 70 kPa IP30

Plastic or metal case with plastic or metal DIN rail

Standards IEEE 802.3at-2009 (PoE+) and IEEE 802.3af-2003 (PoE) supported. Cabling needed is Category It is possible to use a passive PoE injector

* Tracking sensitivity is the lowest GPS signal level for which the device can still detect an in-view satellite 98% of the time when in sequential tracking mode. Acquisition sensitivity is the lowest GPS signal level for which the device can still detect an in-view satellite 50% of the time.

ETSI 511 V12.5.1, ETSI 440 V2.1.1, ETSI 908-1 V11.1.1, ETSI 908-2 V11.1.1, ETSI 908-13 V11.1.1, ETSI 328 V2.1.1, ETSI 893 V2.1.1

ETSI 489-1 v1.9.2, ETSI 489-1 V2.1.1, Draft ETSI 489-19 V2.1.0, Draft ETSI 489-52 V1.1.0, ETSI 489-17 V3.1.1

* Excluding versions with PoE PSE, versions with RS232-RS485-ETH interface or versions with RS232 interface (RJ45).

Bit rate 100 Mbps (DL) / 50 Mbps (UL) 3GPP rel. 8 standard Supported bandwidths: 5 MHz, 10 MHz, 20 MHz Supported frequencies: MHz

Bit rate 42 Mbps (DL) / 5,76 Mbps (UL) 3GPP rel. 7 standard UE CAT. to 3GPP data compression Supported frequencies: MHz

PS bit rate 384 kbps (DL) / 384 kbps (UL) CS bit rate 64 kbps (DL) / 64 kbps (UL) W-CDMA FDD standard Supported frequencies: MHz

Bit rate 237 kbps (DL) / 59,2 kbps (UL) GPRS multislot class to 4 EDGE multislot class to 4, MCS to 9 Supported frequencies: / 1800 MHz

EGSM 900: Class 4 (33 dBm) GSM 1800: Class 1 (30 dBm) EDGE 900: Class E2 (27 dBm) EDGE 1800: Class E2 (26 dBm)

WiFi antenna connector *optional ANT, DIV antenna connector *optional — RS232, ETH RS485, 3-port SWITCH

Some Part number from the same manufacture

XBCS-1500-LUK-C1

CipherLab 1500P Linear Corded Scanner Kit, IP30, Black, Auto-Sense Stand, USB HID Cable, Stand A1500PCBWU001.

BB-SR30900020-SWH

BB-RSN-01000

EKI-9516E-4GMPX

AIW-163

UPOS-M10G

96KVM-R19V1C-IN

Austin Hughes 1U Drawer 1 Port KVM 19″ LCD Keybaord(USA English)+TouchPad+Indian Plug. Manufacturer : Austin Hughes, LCD Size : 19″, Height : 1.73″ (1U), Depth : 19.7″, KB/MS Interface : VGA + USB/PS2,

96SW-WIN11-64-TW

AMAX-5495-A

2-Port CAN Module. Isolation Voltage : 2,500 VDC, Operating Temperature : -10~60 °C (14~140 °F), Relative Humidity

PCIE-1750U-AE

32-ch Isolated Digital I/O with universal output PCIE Card. Channels : 16 (Isolated), Isolation Protection : 2,500 VDC, Programming Language : C#, C++, LabVIEW,

Источник