AR6121
The console interface can connect to an operation terminal for onsite configuration.
- Standards compliance: RS232
- Working mode: duplex Universal Asynchronous Receiver/Transmitter (UART)
- Data equipment type: Data Circuit-terminating Equipment (DCE)
A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
- Standards compliance: IEEE802.3, IEEE802.3u, and IEEE802.3ab
- Working mode: full-duplex (10/100/1000 Mbit/s auto-sensing)
- Maximum distance: 100 m
GE0 is a management interface and is used for web-based management and email-based deployment.
All LAN-side GE interfaces can be configured as WAN-side interfaces.
GE electrical interface: RJ45
A GE combo interface consists of an optical Ethernet interface and an electrical Ethernet interface on the panel. The two interfaces have only one internal forwarding interface. The electrical and optical interfaces are multiplexed, and only either of them can work at a time. When either of the Ethernet interfaces is working, the other interface is shut down.
- The GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
- The GE optical interface (100/1000 Mbit/s auto-sensing) transmits and receives services at 100 Mbit/s or 1000 Mbit/s.
By default, a combo interface works in auto mode and automatically works as an optical or electrical interface.
GE8 is the BootROM management network port on a device and is used to upgrade the device software through the BootROM menu.
The following optical modules are supported:
GE electrical interface: RJ45
A GE combo interface consists of an optical Ethernet interface and an electrical Ethernet interface on the panel. The two interfaces have only one internal forwarding interface. The electrical and optical interfaces are multiplexed, and only either of them can work at a time. When either of the Ethernet interfaces is working, the other interface is shut down.
- The GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
- The GE optical interface (100/1000 Mbit/s auto-sensing) transmits and receives services at 100 Mbit/s or 1000 Mbit/s.
By default, a combo interface works in auto mode and automatically works as an optical or electrical interface.
The following optical modules are supported:
The 10GE optical interfaces (1/10 Gbit/s auto-sensing) can work in GE mode and can transmit and receive service traffic at 1 Gbit/s or 10 Gbit/s.
- Optical interface attributes: The optical interface attributes vary according to the optical module used.
- Standards compliance: IEEE 802.3ae
The following optical modules are supported:
A USB 3.0 interface provides up to 5 Gbit/s upload and download rates.
A USB 2.0 interface provides up to 480 Mbit/s upload and download rates.
USB 2.0-compliant USB flash drive
Indicators
2. GE electrical interface indicators (LAN)
3. GE electrical interface indicators (WAN)
4. GE optical interface indicator (LAN)
5. GE optical interface indicator (WAN)
6. 10GE optical interface indicator (WAN)
Table 3-218 Indicators on the AR6121
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| PWR | PWR indicator | Green | Steady on | The device is powered by the built-in power module normally. |
| — | Off | The device is not powered on. | ||
| SYS | SYS indicator | Green | Slow blinking | The system is running properly. |
| Green | Fast blinking | The system is being powered on or restarted. | ||
| Red | Steady on | A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention. | ||
| — | Off | The system software is not running or is resetting. | ||
| iNET | iNET indicator | Green | Steady on | The network service has been established. |
| — | Off | The network service is unavailable. | ||
| CTRL | CTRL indicator | Green | Steady on | The device has been connected to the controller. |
| — | Off | The device is not connected to the controller. | ||
| — | GE electrical interface indicators (LAN) | Green | Steady on | A link has been established. |
| Green | Off | No link is established. | ||
| Yellow | Blinking | Data is being transmitted or received. | ||
| Yellow | Off | No data is being transmitted or received. | ||
| — | GE electrical interface indicators (WAN) | Green | Steady on | A link has been established. |
| Green | Off | No link is established. | ||
| Yellow | Blinking | Data is being transmitted or received. | ||
| Yellow | Off | No data is being transmitted or received. | ||
| — | GE optical interface indicator (LAN) | Green | Steady on | A link has been established. |
| Green | Blinking | Data is being transmitted or received. | ||
| — | Off | No link is established. | ||
| — | GE optical interface indicator (WAN) | Green | Steady on | A link has been established. |
| Green | Blinking | Data is being transmitted or received. | ||
| — | Off | No link is established. | ||
| — | 10GE optical interface indicator (WAN) | Green | Steady on | A link has been established. |
| Green | Blinking | Data is being transmitted or received. | ||
| — | Off | No link is established. | ||
| — | ACT (USB) indicators | Green | Steady on | The system has been upgraded or configured using a USB flash drive. |
| Green | Blinking | The system is being upgraded or configured using a USB flash drive. | ||
| Red | Steady on | The system fails to be upgraded or configured using a USB flash drive. | ||
| — | Off | No USB flash drive is connected, the USB interface has failed, or the indicator has failed. |
Technical Specifications
When the altitude is 1800 m-5000 m (5906 ft.-16404.2 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
AR6121E (02353TBH-001)
The console interface can connect to an operation terminal for onsite configuration.
- Standards compliance: RS232
- Working mode: duplex Universal Asynchronous Receiver/Transmitter (UART)
- Data equipment type: Data Circuit-terminating Equipment (DCE)
A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
- Standards compliance: IEEE802.3, IEEE802.3u, and IEEE802.3ab
- Working mode: full-duplex (10/100/1000 Mbit/s auto-sensing)
- Maximum distance: 100 m
GE0 is a management interface and is used for web-based management and email-based deployment.
All LAN-side GE interfaces can be configured as WAN-side interfaces.
GE electrical interface: RJ45
A GE combo interface consists of an optical Ethernet interface and an electrical Ethernet interface on the panel. The two interfaces have only one internal forwarding interface. The electrical and optical interfaces are multiplexed, and only either of them can work at a time. When either of the Ethernet interfaces is working, the other interface is shut down.
- The GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
- The GE optical interface (100/1000 Mbit/s auto-sensing) transmits and receives services at 100 Mbit/s or 1000 Mbit/s.
By default, a combo interface works in auto mode and automatically works as an optical or electrical interface.
GE8 is the BootROM management network port on a device and is used to upgrade the device software through the BootROM menu.
The following optical modules are supported:
GE electrical interface: RJ45
A GE combo interface consists of an optical Ethernet interface and an electrical Ethernet interface on the panel. The two interfaces have only one internal forwarding interface. The electrical and optical interfaces are multiplexed, and only either of them can work at a time. When either of the Ethernet interfaces is working, the other interface is shut down.
- The GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
- The GE optical interface (100/1000 Mbit/s auto-sensing) transmits and receives services at 100 Mbit/s or 1000 Mbit/s.
By default, a combo interface works in auto mode and automatically works as an optical or electrical interface.
The following optical modules are supported:
The 10GE optical interfaces (1/10 Gbit/s auto-sensing) can work in GE mode and can transmit and receive service traffic at 1 Gbit/s or 10 Gbit/s.
- Optical interface attributes: The optical interface attributes vary according to the optical module used.
- Standards compliance: IEEE 802.3ae
The following optical modules are supported:
A USB 2.0 interface provides up to 480 Mbit/s upload and download rates.
USB 2.0-compliant USB flash drive
Indicators
2. GE electrical interface indicators (LAN)
3. GE electrical interface indicators (WAN)
4. GE optical interface indicator (LAN)
5. GE optical interface indicator (WAN)
6. 10GE optical interface indicator (WAN)
Table 3-228 Indicators on the AR6121E
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| PWR | PWR indicator | Green | Steady on | The device is powered by the built-in power module normally. |
| — | Off | The device is not powered on. | ||
| SYS | SYS indicator | Green | Slow blinking | The system is running properly. |
| Green | Fast blinking | The system is being powered on or restarted. | ||
| Red | Steady on | A fault that affects services has occurred. The fault cannot be rectified automatically and requires manual intervention. | ||
| — | Off | The system software is not running or is resetting. | ||
| iNET | iNET indicator | Green | Steady on | The network service has been established. |
| — | Off | The network service is unavailable. | ||
| CTRL | CTRL indicator | Green | Steady on | The device has been connected to the controller. |
| — | Off | The device is not connected to the controller. | ||
| — | GE electrical interface indicators (LAN) | Green | Steady on | A link has been established. |
| Green | Off | No link is established. | ||
| Yellow | Blinking | Data is being transmitted or received. | ||
| Yellow | Off | No data is being transmitted or received. | ||
| — | GE electrical interface indicators (WAN) | Green | Steady on | A link has been established. |
| Green | Off | No link is established. | ||
| Yellow | Blinking | Data is being transmitted or received. | ||
| Yellow | Off | No data is being transmitted or received. | ||
| — | GE optical interface indicator (LAN) | Green | Steady on | A link has been established. |
| Green | Blinking | Data is being transmitted or received. | ||
| — | Off | No link is established. | ||
| — | GE optical interface indicator (WAN) | Green | Steady on | A link has been established. |
| Green | Blinking | Data is being transmitted or received. | ||
| — | Off | No link is established. | ||
| — | 10GE optical interface indicator (WAN) | Green | Steady on | A link has been established. |
| Green | Blinking | Data is being transmitted or received. | ||
| — | Off | No link is established. | ||
| — | ACT (USB) indicators | Green | Steady on | The system has been upgraded or configured using a USB flash drive. |
| Green | Blinking | The system is being upgraded or configured using a USB flash drive. | ||
| Red | Steady on | The system fails to be upgraded or configured using a USB flash drive. | ||
| — | Off | No USB flash drive is connected, the USB interface has failed, or the indicator has failed. |
Technical Specifications
When the altitude is 1800 m-5000 m (5906 ft.-16404.2 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).
Маршрутизатор huawei ar6121 e
Huawei AR6121E — это маршрутизатор для малых и средних сетей, обеспечивающий надежную и безопасную передачу данных. Устройство имеет компактный дизайн и высокую производительность, благодаря мощному процессору и оптимизированному алгоритму обработки данных. AR6121E поддерживает жесткие требования к безопасности и шифрованию данных, а также функции QoS и NAT для эффективного управления трафиком. Это надежное решение для малых и средних организаций, которые ищут высококачественный маршрутизатор с удобным управлением на основе графического интерфейса пользователя.
Маршрутизатор Huawei AR6121E – цена, наличие, характеристики, отзывы и условия доставки по Москве и России.
Купить и доставить AR6121E в Москве или по России.
— Заполнить форму онлайн-заказа в корзине
— Заказ по тел.: +7 (499) 110-05-65
— E-mail: sale@magnetogroup.ru
Комплектация также может быть изменена производителем без предварительного уведомления.
Данное описание, цена и наличие товара не являются публичной офертой.
Наличие и стоимость оборудования необходимо уточнить у менеджеров.
Несколько простых шагов.
Список товаров можно направить на эл.почту sale@magnetogroup.ru
Проанализируем его доступность и лучшую стоимость
Закупим для вас тестовый объем необходимого товара
Исходя из плана ваших закупок будем пополнять товарные остатки ранее закупленного товара