Mount smb share linux debian

Mount smb share linux debian

DOCUMENTATION Going further

The Samba server is extremely configurable and versatile, and can address a great many different use cases matching very different requirements and network architectures. This book only focuses on the use case where Samba is used as a standalone server, but it can also be an NT4 Domain Controller or a full Active Directory Domain Controller, or a simple member of an existing domain (which could be managed by a Windows server).

The samba package contains all the necessary manual pages and in /usr/share/doc/samba/examples/ a wealth of commented example files. If you are looking for a more comprehensive documentation, you may check the Samba website.

TOOL Authenticating with a Windows Server

Winbind gives system administrators the option of using a Windows server as an authentication server. Winbind also integrates cleanly with PAM and NSS. This allows setting up Linux machines where all users of a Windows domain automatically get an account.

More information can be found in the /usr/share/doc/libpam-winbind/examples/pam_winbind/ directory of the libpam-winbind package.

11.5.1.1. Configuring with debconf

The package sets up a minimal configuration during the initial installation in /etc/samba/smb.conf by plainly copying /usr/share/samba/smb.conf . So you should really run dpkg-reconfigure samba-common to adapt it:

On first installation the only piece of required information is the name of the workgroup where the Samba server will belong (the answer is FALCOTNET in our case).

In case of a package update (from the old stable Debian version) or if the SMB server has already been configured to use a WINS server ( wins server ), the package also proposes identifying the WINS server from the information provided by the DHCP daemon. The Falcot Corp administrators rejected this option, since they intend to use the Samba server itself as the WINS server.

11.5.1.2. Configuring Manually

11.5.1.2.1. Changes to smb.conf

The requirements at Falcot require other options to be modified in the /etc/samba/smb.conf configuration file. The following excerpts summarize the changes that were effected in the [global] section.

[. ] [global] ## Browsing/Identification ### # Change this to the workgroup/NT-domain name your Samba server will part of workgroup = FALCOTNET [. ] # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable its WINS Server wins support = yes  [. ] ####### Authentication ####### # Server role. Defines in which mode Samba will operate. Possible # values are "standalone server", "member server", "classic primary # domain controller", "classic backup domain controller", "active # directory domain controller". # # Most people will want "standalone server" or "member server". # Running as "active directory domain controller" will require first # running "samba-tool domain provision" to wipe databases and create a # new domain. server role = standalone server obey pam restrictions = yes [. ] # "security = user" is always a good idea. This will require a Unix account # in this server for every user accessing the server. security = user  [. ]

Indicates that Samba should act as a Netbios name server (WINS) for the local network. This option had been removed from the default configuration in Buster and must be added manually if desired.

This is the default value for this parameter; however, since it is central to the Samba configuration, filling it explicitly is recommended. Each user must authenticate before accessing any share.

11.5.1.2.2. Adding Users

Each Samba user needs an account on the server; the Unix accounts must be created first, then the user needs to be registered in Samba’s database. The Unix step is done quite normally (using adduser for instance).

Adding an existing user to the Samba database is a matter of running the smbpasswd -a user command; this command asks for the password interactively.

A user can be deleted with the smbpasswd -x user command. A Samba account can also be temporarily disabled (with smbpasswd -d user ) and re-enabled later (with smbpasswd -e user ).

11.5.2. Samba Client

The client features in Samba allow a Linux machine to access Windows shares and shared printers. The required programs are available in the cifs-utils and smbclient packages.

11.5.2.1. The smbclient Program

The smbclient program queries SMB servers. It accepts a -U user option, for connecting to the server under a specific identity. smbclient //server/share accesses the share in an interactive way similar to the command-line FTP client. smbclient -L server lists all available (and visible) shares on a server.

11.5.2.2. Mounting Windows Shares

The mount command allows mounting a Windows share into the Linux filesystem hierarchy (with the help of mount.cifs provided by cifs-utils ).

Example 11.21. Mounting a Windows share

mount -t cifs //arrakis/shared /shared \ -o credentials=/etc/smb-credentials

username = user password = password

Other options can be specified on the command-line; their full list is available in the mount.cifs (1) manual page. Two options in particular can be interesting: uid and gid allow forcing the owner and group of files available on the mount, so as not to restrict access to root.

//server/shared /shared cifs credentials=/etc/smb-credentials

11.5.2.3. Printing on a Shared Printer

CUPS is an elegant solution for printing from a Linux workstation to a printer shared by a Windows machine. When the smbclient is installed, CUPS allows installing Windows shared printers automatically.

Enter the name that will uniquely identify this printer. Then enter the description and location of the printer. Those are the strings that will be shown to end users to help them identify the printers.

Indicate the manufacturer/model of the printer, or directly provide a working printer description file (PPD).

Источник

Как в Linux монтировать шару CIFS

Обновлено: 01.05.2023 Опубликовано: 18.07.2016

Что такое Linux и CIFS простыми словами. Работа с общими папками Windows происходит с использованием протокола CIFS (SMB). Все примеры в данном руководстве выполняются на Linux Ubuntu и CentOS.

Подготовка

Установка пакетов

Сетевые порты

Синтаксис

* вместо mount.cifs можно написать mount -t cifs.

mount.cifs //192.168.1.1/public /mnt

* простой пример монтирования папки public на сервере 192.168.1.1 в локальный каталог /mnt.

Если нам не известны расшаренные папки на сервере, мы можем воспользоваться утилитой smbclient. Для начала установим ее.

а) на RPM (Rocky Linux / РЕД ОС / Red Hat / CentOS / Fedora):

б) на Deb (Debian / Ubuntu / Astra Linux / Mint):

или, при необходимости авторизоваться на файловом сервере:

smbclient -L 192.168.1.1 -U username

Ручное монтирование

Теперь монтирование можно выполнить следующей командой:

mount.cifs //192.168.1.10/share /mnt -o user=dmosk

* в данном примере будет примонтирован каталог share на сервере 192.168.1.10 в локальную папку /mnt под учетной записью dmosk.

То же самое, с использованием домена:

mount.cifs //192.168.1.10/share /mnt -o user=dmosk,domain=dmosk.local

Автоматическое монтирование CIFS через fstab

Для начала создаем файл, в котором будем хранить данные авторизации при подключении к общей папке:

И добавляем в него данные следующего вида:

username=dmosk
password=dPassw0rd
domain=dmosk.local

* в этом примере создана пара логин/пароль — dmosk/dPassw0rd; domain указывать не обязательно, если аутентификация выполняется без него.

Задаем права на созданный файл, чтобы доступ был только у пользователя, скажем, root:

chown root:root /root/.smbclient

Теперь открываем конфигурационный файл fstab:

и добавляем в него следующее:

//192.168.1.10/share /mnt cifs user,rw,credentials=/root/.smbclient 0 0

* в данном примере выполняется монтирование общей папки share на сервере с IP-адресом 192.168.1.10 в каталог /mnt. Параметры для подключения — user: позволяет выполнить монтирование любому пользователю, rw: с правом на чтение и запись, credentials: файл, который мы создали на предыдущем шаге.

Чтобы проверить правильность настроек, вводим следующую команду:

Примеры использования опций

Версии SMB

Если на стороне Windows используется старая или слишком новая версия протокола SMB, при попытке монтирования мы можем получить ошибку mount error(112): Host is down. Чтобы это исправить, указываем версию:

mount.cifs //192.168.1.10/share /mnt/ -o vers=1.0

* монтирование по протоколу SMB1.0

Монтирование от гостевой учетной записи

Если сервер принимает запросы без логина и пароля, то клиент подключается, как гость:

mount.cifs //192.168.1.10/share /mnt -o guest

//192.168.1.10/share /mnt cifs guest 0 0

Права на примонтированные каталоги

При монтировании папки мы можем указать определенные права:

mount.cifs //192.168.1.10/share /mnt -o file_mode=0777,dir_mode=0777

Для указания владельца, который будет назначен для примонтированного каталога, используем:

mount.cifs //192.168.1.10/share /mnt -o uid=33,gid=33

* чтобы посмотреть идентификаторы пользователя, вводим id -u и id -g .

Источник