How to mount an ISO file?
Where is the issue? Can you ls /cdrom ? Note that ISO files are by definition read-only hence the warning.
The warning you get about being «mounted read only» is normal! iso files are always mounted read only. you can’t modify them. . (thanks to Anwar Shah down below)
15 Answers 15
Maybe, instead of installing additional software, you can use what the system has to this end:
- Create a directory to serve as the mount location:
sudo mount -o loop path/to/iso/file/YOUR_ISO_FILE.ISO /media/iso On your desktop will appear the mounted ISO.
doesn’t work sudo mount -o loop smb://server/downloads/disk.iso /media/iso : No such file or directory
@chobok copying it over to a local directory works, but I don’t have a file server set up to copy files to my desktop every time I want to use them. I’ve gone back to Windows for now until this is sorted out.
@waspinator you could first mount your samba share and then you can use it as local filesystem (in aspect of current problem)
Try mounting it using a GUI.
Navigate to the *.iso file using a file manager, then Right click -> Open with Archive Mounter .
Or you can install the Furius ISO Mount. It is available in the Ubuntu Software Center:
sudo apt-get install furiusisomount Here are some screenshots:
Mounting via «archive mounter» is not a very good method, if you want to run file from the iso. (It is only good to view content). Because, we can’t execute file from the iso mounted via «Archive mounter»
I found the easiest and fastest way to handle the ISO file in Ubuntu 14.04 was to right click on the ISO file, choose Disk Image Mounter and then simply proceed to the newly opened directory:
In case you don’t have installed, you can use this command in terminal to install it:
sudo apt-get install gnome-disk-utility I just realized this exists too! I am a programmer and I like the command line, but this is really the proper, user-friendly, convenient way.
I really like Furius ISO Mount, it’s a simple application for mounting ISO, IMG, BIN, MDF and NG files.
- Automatically Mounts ISO, IMG, BIN, MDF and NRG Image Files.
- Automatically creates a mount point in your home directory.
- Automatically Unmounts the Image files.
- Automatically removes the mount directory to return your home directory to its previous state.
- Automatically saves the history of the last 10 images mounted.
- Mounts multiple images.
- Burn ISO and IMG Files to optical disk.
- Generate Md5 and SHA1 checksums.
- Automatically retrieves any previously unmounted images.
- Automatically generates a log file of all commands needed to mount and unmount images manually.
- Localizable (currently Czech, Danish, French, Hungarian, Italian, German, Polish, Slovenian, Spanish and Turkish are available.
If 5 stars from 77 ratings is enough to convince you open up your Ubuntu Software Manager and search for Furius ISO Mount.
I’m Assuming your iso file name is matlab2011a_64.iso in the folder /home/dev/Hämtningar/
You can do this to mount the iso file in /cdrom folder or create another folder and mount the iso file in it. I’m going to create a separate folder in your home directory. Open a terminal to do all these things
sudo mount ~/dev/Hämtningar/matlab1011a_64.iso ~/mount-point -o loop But why can’t you write to the iso file? Shouldn’t you be allowed to make modifications, and then repack the .iso?
You can quite easily mount an iso using command-line tools:
First create a directory to mount the iso in with:
(Usually the loop module that enables an iso type filesystem to be read is automatically added so you shouldn’t need to run sudo modprobe loop .)
Now mount your iso by pointing mount to its location:
sudo mount ~/location/of/iso /media/myisos -o loop It will give you a warning about the iso being mounted read-only, but that is correct.
You can later unmount it with
sudo umount ~/location/of/iso /media/myisos loop module is loaded automatically as far as I know. Also -t iso9660 is not required anymore in mounting iso file
There is a GUI tool built-in albeit menu UI is confusing as it looks like a window title;)
Run «Disks» from your dash. Then from «Disks» menu select «Attach disk image. «:
You can use ISO Master, a GUI utility similar to furiusisomount . Simply:
sudo apt-get install isomaster And then open your *.iso file with ISO Master from your preferred file manager.
Basically, it allows you to add or remove files from the ISO image, then save the changes.
If you want to get read write permissions for copying files from the mounted ISO and do not want to install something else. Just go into terminal shell, navigate to whereever you mounted your ISO, such as:
sudo mount -o loop /home/username/whatever.iso /mnt/iso Than copy the entire mounted directory somewhere else:
sudo cp -rf /mnt/iso /home/username/MyMountedISO sudo cp install.img /home/username/MyMountedISO Use udisksctl it is part of the system. It mounts your iso in userspace and does not need to be run as superuser. Your file will be mounted to /media/$USER/ with appropriate permissions.
udisksctl loop-setup -f my.iso udisksctl will tell you which loop device it is using.
udisksctl mount -b /dev/loopX where X is the number of the loopdevice your iso is mapped to
Unmount iso
udisksctl unmount -b /dev/loopX udisksctl loop-delete -b /dev/loopX where X is the number of the loop device your iso is mapped to. If you forgot you can figure it out by
Mounting an iso file is simpler relative to installing it latter. Just to mention that if you want to install latest matlab versions in latest ubuntus, you do not need to mount it the iso, rather extract it there and proceed in installation after making the install and /matlab-extracted-folder/sys/java/jre/glnxa64/jre/bin/java executables.
Tested on ubuntu 14.04 and matlab 2014a.
I found Gmount to be very simple to use for mounting. It has a vintage GUI that is very simple to use and straight to the point. gmount GUI
Install Gmount from the software center then launch it. You can then select your iso image file and choose a mount point where you want to launch the iso file from. You will be prompted for a root password in order to complete the action and thats it.
Install Gmount from the software center then launch it. You can then select your iso image file and choose a mount point where you want to launch the iso file from. You will be prompted for a root password in order to complete the action and thats it.
PS. And, also try double clicking
if the ISO image is an Ubuntu LiveCD ISO etc.
To verify that the functionality IS applicable to these, right click the files to view the options for pertinent operations.
You can mount an image (or iso) file as read/write as follows. Set up the loop, then mount with these commands:
losetup -fP your.img #list loop devices losetup -a If the loop device above was set up as /dev/loop0 then mount cmd is:
sudo mount -o loop /dev/loop0 /your/mnt/folder/ After this, if you get an error saying the loop device is read only, you can make it writable with this command:
If you get an error saying the image is read only, you can remount the image as r/w with this command:
sudo mount -o remount,rw /your/mnt/folder To remove the mount and loop device:
sudo umount /your/mnt/folder/ losetup -d /dev/loop0 A DECADE LATER and still a common newb question & this result is near the top of search.
It can easily be deduced from the initial question that:
2- editing an ISO is the goal
->»add readonly option -r to mount. ->Where is the issue?» ->»iso files are always mounted read only. you can’t modify them»
->»The simplest way to overcome this would be to copy the iso file to a local directory first.» ->»But the question is how would you mount an ISO, perhaps you should add how to do this using Gmount.»
->»I’ve gone back to Windows for now until this is sorted out.»
Any person new to Linux could (still) benefit from a SINGLE consolidated solution (my personal experience).
(Providing details) The sum of [these conflicting statements/responses-to-posts-other-than-the initial-question/answers] is not specifically helpful. (reference to several answers)
Not each answer- the SUM of these. Can some one clean up this answer? please.
B/C I’ve also gone back to Windows for now until this is sorted out and it seems this is a common occurance.
Yea sorry about the rant — feedback is vital when the process has become run-away.
Как смонтировать ISO-файл в Linux
Файл ISO — это архивный файл, который обычно содержит полный образ компакт-диска или DVD. Например, большинство операционных систем, таких как Windows, Linux и macOS, распространяются в виде образов ISO.
Файлы ISO можно извлечь с помощью популярных архивных программ, смонтировать на устройстве с петлей и записать на USB-накопитель или пустой компакт-диск.
В этом руководстве мы объясним, как монтировать файлы ISO в Linux.
Как смонтировать файлы ISO с помощью командной строки
Команда mount позволяет прикреплять (монтировать) файлы ISO в определенной точке монтирования в дереве каталогов.
Инструкции в этом разделе должны работать с любым дистрибутивом Linux, включая Ubuntu, Debian и CentOS.
- Начните с создания точки монтирования, это может быть любое место, которое вы хотите:
sudo mount /path/to/image.iso /media/iso -o loopМонтирование файлов ISO с помощью Gnome
Если вы используете дистрибутив Linux, который использует Gnome в качестве среды рабочего стола, вы можете смонтировать файл ISO с помощью приложения для монтирования образа диска Gnome.
Найдите ISO-файл, который вы хотите смонтировать, и щелкните его правой кнопкой мыши. В контекстном меню выберите «Открыть с помощью Disk Image Mounter».
После подключения образа на рабочем столе должен появиться значок устройства. Дважды щелкните по нему, и откроется файловый менеджер Gnome.
Чтобы отключить файл ISO, щелкните правой кнопкой мыши значок устройства и выберите «Размонтировать».
Выводы
В Linux вы можете монтировать файлы ISO с помощью команды mount . Пользователи настольных компьютеров могут использовать графические инструменты, такие как Gnome Disk Image Mounter.
Если у вас есть какие-либо вопросы или отзывы, не стесняйтесь оставлять комментарии.