Moxa uport 1130 driver linux

Преобразователь MOXA UPort 1130

Преобразователь MOXA UPort 1130 является 1-портовым конвертером USB в RS-422/485 и подключаются к USB-порту компьютера. Конвертер UPort 1130 используется для создания в компьютере дополнительных последовательных портов в операционных системах Windows или Linux.

Преобразователь MOXA UPort 1130 является 1-портовым конвертером USB в RS-422/485 и подключаются к USB-порту компьютера. Конвертер UPort 1130 используется для создания в компьютере дополнительных последовательных портов в операционных системах Windows или Linux.

Примечание. Перед подключением преобразователя к USB-порту компьютера рекомендуется сначала установить драйвер

• Программа VEDA CST 12 июля, 2023
• Подключение к преобразователю частоты VEDA VFD через ПО VEDA CST 11 июля, 2023
• Комнатный термостат RSmart-S Ridan 4 июня, 2023
• Рейтинг лучших тепловычислителей России 4 июня, 2023
• Снятие показаний с тепловычислителей Взлет ТСРВ 21 мая, 2023

Поскольку преобразователи поддерживают горячее подключение, их установкой не требуется выключать питание компьютера.

Мастер Установки Оборудования (Found New Hardware) автоматически разместит соответствующие драйверы, в процессе установки адаптера в системы Windows будут появляться различные информационные окна.

После завершения работы Мастера Установки Оборудования (Found New Hardware), изменять настройки последовательного порта можно будет через Диспетчер Устройств Windows (Windows Device Manager).

В Диспетчере Устройств появится новый последовательный порт появится в списке портов (COM & LPT), а также новое устройство в группе Многопортовые Последовательные Адаптеры (Multiport Serial Adapters).

Характеристики

Реализация корпуса

Внешний вид и материал:	Пластик повышенной прочности
Монтаж:	На стол

Порты ввода-вывода

Всего последовательных портов:	1
Количество разъемов RS-422/485:	1
Скорость RS-422/485 (максимум):	921600 Бит/с
Тип коннектора:	1xDB9M
Количество разъемов USB:	1

Электропитание MOXA UPort 1130

Требования по напряжению DC:	5 … 5 В
Потребляемый ток:	60 мА

Операционная система

Поддержка ОС:

Linux kernel 2.6, Windows CE 5.0, Windows CE 6.0, Windows Server 2003, Windows Server 2008, Windows Server 2012, Windows XP, Windows 7, Windows 8, Linux kernel 2.4, Linux kernel 3.x, Windows 98, Windows ME, Windows 2000, Windows Vista, Windows 8.1, Windows 10, Windows Server 2016, Linux kernel 4.x

Требования к условиям использования UPort 1130

Требования к температуре при работе:	0 … 55 °С
Требования к влажности:	5 … 95 %
Время наработки на отказ:	1949025 ч

Ширина:	38.4 мм
Высота:	60 мм
Глубина:	20 мм

Сертификация и поддерживаемые стандарты

Стандарты ЭМС:	МЭК 61000-4-2, МЭК 61000-4-3, МЭК 61000-4-4, МЭК 61000-4-5, МЭК 61000-4-6, МЭК 61000-4-8, EN 55024, EN 55032
Стандарты по электромагнитным помехам:	FCC Part 15 Subpart B Class A, CISPR 32

Комплект поставки MOXA UPort 1130

Перед установкой преобразователя, пожалуйста, убедитесь в наличии всех компонентов:

• Адаптер USB в последовательный порт серии UPort 1130
• CD с документацией и программным обеспечением (драйвер)
• Краткое руководство по установке UPort
• Гарантийный талон (5 лет)
• Миниатюрный переходник с DB9F на винтовые клеммы

Драйвер MOXA UPort 1130

Скачать драйвер MOXA UPort 1130 для Windows 7/8/8.1/10, Windows Server 2008 R2/2012/2012 R2/2016:

Скачать драйвер MOXA для Linux 3x-4x:

• Поддержка более 370 типов приборов учета тепла, воды, электроэнергии и др.
• Автоматический и ручной опрос GSM/GPRS модемов, УСПД
• АРМ + WEB-интерфейс + мобильное приложение (Android / iOS)
• Таблицы, графики, отчеты, карты, мнемосхема, журналы работ, профиль мощности, анализ данных и НС
• Без абонентской платы, бесплатная лицензия

Источник

Saved searches

Use saved searches to filter your results more quickly

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session. You switched accounts on another tab or window. Reload to refresh your session.

Moxa-Linux/mxu11x0

This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

Sign In Required

Please sign in to use Codespaces.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

readme.txt

============================================================================= MOXA UPort 11x0 USB to Serial Hub Family Driver Installation Guide for Linux Kernel 4.x Copyright (C) 2019, Moxa Inc. ============================================================================= Date: 08/19/2020 CONTENTS 0. Note 1. Introduction 2. System Requirements 3. Installation 3.1 Driver files 3.2 Device naming convention 3.3 Module driver configuration 3.4 Static driver configuration 3.5 Verify driver installation 4. Uninstallation 5. Setserial 6. Troubleshooting ----------------------------------------------------------------------------- 0. Note The Moxa UPort 11x0 USB to Serial Hub driver can be used in the Linux kernel with the usbcore and usbserial modules. This two modules is built-in module in the Linux kernel version 2.6.x and follow. In the Linux kernel version, you must check this two build-in modules existed. Otherwise, you will fail to using MOXA UPort 11x0 USB to Serial Hub driver. ----------------------------------------------------------------------------- 1. Introduction The MOXA UPort 11x0 USB to Serial Hub Linux driver supports following devices. - UPort 1110, 1 port RS-232 USB to Serial Hub. - UPort 1130, 1 port RS-422/485 USB to Serial Hub. - UPort 1130I, 1 port RS-422/485 USB to Serial Hub with isolation protection. - UPort 1150, 1 port RS-232/422/485 USB to Serial Hub. - UPort 1150I, 1 port RS-232/422/485 USB to Serial Hub with isolation protection. - USB Console, 1 port RS-232 USB to Serial Hub. - USB-to-Serial Port Driver, 1 port RS-232/422/485 USB to Serial Hub This driver supports x86 and x64(AMD64/EM64T) hardware platform. In order to maintain compatibility, this version has also been properly tested with several Linux distribution (see version.txt). However, if compatibility problem occurs, please contact Moxa Technologies technical support. (support@moxa.com) All the drivers are published in form of source code under GNU General Public License in this version. Please refer to GNU General Public License announcement in each source code file for more detail. This version of driver can be only installed as Loadable Module (Module driver). Before you install the driver, please refer to hardware installation procedure in the User's Manual. ----------------------------------------------------------------------------- 2. System Requirements - Hardware platform: x86, x64 - Kernel version: 2.6.x and above - gcc version 3.x - kernel source Additional requirements for Raspbian - gcc-4.8.3 or above - ncurses-devel-5.9 or above - rpi-source, read the instruction from it's website. (https://github.com/notro/rpi-source/wiki) Note: - rpi-source is a 3rd party package offering integrated kernel resouce for building driver. Real TTY are tested with this package and working well. However the requirements may be various for different Raspbian version. Please read the manual of Raspbian and rpi-source to understand the knowhow and limitation. - Real TTY driver with Raspbian Jessie(4.4.50) and Buster(4.19) are tested on Pi 2/3. ----------------------------------------------------------------------------- 3. Installation 3.1 Driver files 3.2 Device naming convention 3.3 Module driver configuration 3.4 Static driver configuration 3.5 Verify driver installation 3.1 Driver files The driver file may be obtained from website, under the product page. The first step is to copy driver file "driv_linux_uport1p_[VERSION]_[BUILD].tgz" into a user directory. e.g. /moxa. Please execute commands as below. # cd /moxa # tar xvfz driv_linux_uport1p_[VERSION]_[BUILD].tgz 3.2 Device naming convention You may find all the driver files in //mxu11x0/. Following installation procedure depends on the model you'd like to run the driver. Dialin and callout port ----------------------- This driver remains traditional serial device properties. Because the limitation of the usb build-in modules that are usbcore and usbserial, There is only one special file name for each serial port. This one is dial-in port which is named "ttyUSBxx". 3.3 Module driver configuration To simplify the processes behind, we provide a single step to build, install and load the MOXA driver. You may execute the ./mxinstall to use the MOXA product. Once you successfully execute ./mxinstall, you can skip step 3.3.1 and 3.3.2. 3.3.1 Build the MOXA driver Before using the MOXA driver, you need compile the all the source code. This step is only need to be executed once. But you still re-compile the source code if you modify the source code. Find "Makefile" in /moxa/mxu11x0/driver, then run # make clean; make install The driver files "mxu11x0.ko" will be properly compiled and copied to system directories respectively. 3.3.2 Load the MOXA driver The driver will be loaded automatically while pluging the UPort into you PC. Besides, you can load the driver manually. # modprobe mxu11x0 It will activate the module driver. You may run "lsmod" to check if "mxu11x0" is activated. Before you load this module driver, you have to run "lsmod" to check if "usbcore" and "usbserial" are activated. 3.4 Static driver configuration Note: To use static driver, you must install the linux kernel source package. 3.4.1 Create link # cd /usr/src//drivers/usb/serial/ # ln -s /moxa/mxu11x0/driver/mxu11x0.c mxu11x0.c # ln -s /moxa/mxu11x0/driver/mxu11x0.h mxu11x0.h # ln -s /moxa/mxu11x0/driver/mxu1110_fw.h mxu1110_fw.h # ln -s /moxa/mxu11x0/driver/mxu1130_fw.h mxu1130_fw.h # ln -s /moxa/mxu11x0/driver/mxu1131_fw.h mxu1131_fw.h # ln -s /moxa/mxu11x0/driver/mxu1150_fw.h mxu1150_fw.h # ln -s /moxa/mxu11x0/driver/mxu1151_fw.h mxu1151_fw.h # ln -s /moxa/mxu11x0/driver/mxu3001_fw.h mxu3001_fw.h # ln -s /moxa/mxu11x0/driver/mxu7001_fw.h mxu7001_fw.h 3.4.2 Modify kernel configuration file. Add the following line into configuration file. /usr/src//drivers/usb/serial/Kconfig . config USB_SERIAL_CONSOLE . config USB_SERIAL_GENERIC . config MOXA_UPORT_11X0 <-- Add the lines. tristate "USB Moxa UPort 11x0 Driver" <-- depends on USB_SERIAL <-- . 3.4.3 Modify the kernel Makefile Add the following line to the last line of Makefile. /usr/src//drviers/usb/serial/Makefile . . . obj-$(CONFIG_MOXA_UPORT_11X0) += mxu11x0.o <-- Add the line. 3.4.4 Setup kernel configuration Configure the kernel: # cd /usr/src/# make menuconfig You will go into a menu-driven system. Please select [Device Drivers] [USB Support], [USB Serial Converter support], enable both the [USB Serial Converter support] and the [USB MOXA UPORT 11x0 Driver] drivers with "[*]" by pressing space bar for built-in (not "[M]"), then select [Exit] to exit this program and save kernel configurations. 3.4.5 Rebuild kernel The following are for Linux kernel rebuilding, for your reference only. For appropriate details, please refer to the Linux document. a. cd /usr/src/ b. make c. make modules d. make modules_install e. make install 3.5 Verify driver installation You may refer to /var/log/syslog to check the latest status log reported by this driver whenever it's activated or type command "dmesg" to get driver information. ----------------------------------------------------------------------------- 4. Uninstallation # cd /moxa/mxu11x0 # make remove ----------------------------------------------------------------------------- 5. Setserial NOTE: To use the setserial tools, you have to install it first. The setserial is a free software, you can download it on http://sourceforge.net/projects/setserial/ . MOXA UPort 1130/1130I provides three interfaces(RS-485 2W, RS-485 4W, RS-422) and UPort 1150/1150I/USB-to-Serial Port Driver provides four interfaces (RS-232, RS-485 2W, RS-485 4W, RS-422). If you want to switch different interface, you can execute the setserial command to set the port's interface. The supported parameter is listed below. parameter value interface port 0 RS-232 1 RS-485 2W 2 RS-422 3 RS-485 4W For example: To set the port's informations: # setserial /dev/ttyUSB0 port 1 To get the port's informations: # setserial -G /dev/ttyUSB0 ----------------------------------------------------------------------------- 6. Limitation 1. Max. ports If you want to install more than one UPort USB serial Hub, the best way is to connect to USB port directly. In lab test, four USB ports with four UPorts still work very well. If we connect to USB hub, the throughput will be dropped down. To get good performance, please connecting UPort to USB host directly . 2. Compile error To build Moxa driver, it needs kernel header files. If you got some compile error, please run "rpm -qa | grep kernel" to check whether the kernel-source package is installed properly. If not, please get the kernel-source irpm package and run "rpm -ivh " to install. For Ubuntu and Debian, if there is no rpm in your system, try the following commands to install kernel headers: # apt-get install linux-headers-$(uname -r) You also need to make sure the build tool is ready, including make/gcc/lib. Take Ubuntu and Debian for example, type the commands below to install GNU GCC: # apt-get install build-essential Please see Linux relevant document to get more information. 3. Probe error The UPort 11x0 series USB to Serial Hub need firmware downloaded after attaching to PC. Hence, the driver will reset the UPort after downloading firmware and probe the UPort again. After that, the UPort will attach to the /dev/ttyUSBxx. Therefore, the message "mxusb:probe of x-x:x.x failed with error -5" will show only once before successfully installing the device. You may refer to /dev/ttyUSBxx to see if the UPort is set correctly. -----------------------------------------------------------------------------

Источник