Настройка роутера cisco e3200

Cisco Linksys E3200 Default Router Login

To get access to your Cisco Linksys E3200, you need the IP of your device, the username and password. You’ll find such information in the Manual of your Cisco Linksys E3200 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it’s necessary that you are connected to the router.

Cisco Linksys E3200 Login Guide

• Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
• Click HERE to auto detect your router IP. After some seconds our tool will show a link to your router login page. Click on the shown link.
• You should see 2 text fields where you can enter a username and a password.
• The default username for your Cisco Linksys E3200 is admin.
  The default password is admin.
• Enter the username & password, hit «Enter» and now you should see the control panel of your router.

If above login credentials doesn’t work with your Cisco Linksys E3200 router then try this method

Try different ID/password combinations that are widely used by Cisco Linksys that you’ll find below. In this list are the most popular default username and password combinations used by Cisco Linksys. Sometimes the username and password doesn’t work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your Cisco Linksys E3200 wireless router.

#	Username	Password
1	admin	admin
2	admin	(blank)

Nothing of the methods worked for me and I still not get access to my Cisco Linksys E3200!

All you need to do is to reset your E3200 modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert’s assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.

Источник

Linksys E3200 router setup

Linksys E3200 router setup is easy and you can do it yourself. This router offers fast speed to connect your computers, Internet-ready TVs, game consoles, and other Wi-Fi devices at transfer rates up to 300 + 300 Mbps speed for an optimal home network experience. With the built-in Storage Link, you can easily add gigabytes of storage space onto your network using USB 2.0 hard drives, or plug in a USB flash disk to access your portable data files. Just like other Linksys router setup process, you can install Linksys E3200 router with or without Cisco connect software.

Follow the Easy Steps below o setup Linksys E3200 router without CD or using Cisco connect software

This router does not have built in Media server like E4200. You can configure FTP server though.

Linksys E3200 comes with 6 Internal antennas for better coverage and reliability so you can enjoy your wireless network from anywhere in your home. you can also use RE1000 wireless range extender for more wireless coverage. RE1000 is wireless N compatible range extender.

• Simultaneous Dual-Band N (2.4 & 5 GHz). You may get 300+ Mbps speed.
• It has 4 Gigabit Ethernet ports for wired connection. Use the four Gigabit Ethernet (10/100/1000) ports for quick file sharing, 10x faster than standard Ethernet, between other Gigabit-enabled devices like computers, hard drives, and servers.
• USB port for shared storage.
• SPI firewall to help keep your network protected.
• QoS traffic prioritization technology is designed to deliver your time-sensitive Internet traffic efficiently so you can enjoy fast downloads, smooth video and music streaming, and gaming and VoIP.
• Create a separate, password protected network for guests. Your guests should connect to your wireless network listed above by opening a Web browser and entering the guest password.

This router comes with Cisco connect software that you can use for the initial installation of your router. Cisco Connect software helps you customize your settings, and quickly add multiple devices to your network.

Linksys E3200 router setup using Cisco connect software:

Connect your computer directly to the Internet modem and make sure that your modem is working fine. Your computer should get Internet connection when you connect the computer directly to the modem.

Now connect the modem to the Internet port on Linksys E3200 router. Connect your main computer to port 1 of the router. Press and hold the reset button for 30 seconds. Release the reset button and wait for 30 seconds. Unplug the power and plug it back in. Now insert the CD that comes with E3200. Run the Cisco connect software. It will setup your network automatically. At the end you will see your network settings. It will create 2 different wireless networks. One for your main wireless devices and the other is for guest. Guest network is unsecured network and anyone can join the guest network. But no one can access the Internet without a password. That means there is a password for the Guest network also.

Linksys E3200 router setup without Cisco connect software :

Like other Linksys routers, connect the modem and computer to the router with the Ethernet cable. Check the status of lights.

Open the Internet browser and in the address bar type 192.168.1.1. This is the default IP address of Linksys E3200. Open the Linksys router setup page of the router and start change the Internet connection settings manually.

For Cable Internet, you will need to clone the MAC address of the main computer. For DSL Internet service, you will need to change the PPPoE settings.

Get access to Easy setup Guide to setup and troubleshoot Linksys E3200 router.

Once you change the Internet connection settings, your main computer will be able to access Internet through E3200. Change the wireless network settings. First of all, change the name of the wireless network SSID. The secure the wireless network by applying the security settings. Make sure that you have a password on the WiFi, otherwise anybody can access your network.

Now one by one, start connecting all the wireless computers and devices to the network. Search for the network, enter the security password and get connected.

You can manage guest settings using the web interface of the Linksys E3200 router. So it is not necessary to install the Cisco connect software to manage guest network as it was the case in Linksys E1000, E2000 and E3000 wireless routers.

You will find all your network settings on the setup page of Linksys E3200 router. The WEP / WPA network key and guest password are different.

Parental control and guest access are the parts of Cisco connect. You can limit access time and websites with Parental Controls.

What is default password of Linksys E3200 router?

This is the most common question asked about all the routers. The default password of Linksys E3200 is admin, leave the user name blank. But if you have installed the Cisco connect software to setup then the password must be changed. You can open the Cisco connect software and check the router settings. Your wireless network password will be the password to access the setup page.

I will suggest you check the firmware version on which your Linksys E3200 router is running. Open the Linksys router setup page and go to status tab. Check the firmware version of your device. If it is not up to date then download the latest firmware from Linksys website and upgrade it.

Fix Home Network
Join Thousands of satisfied users !

Get access to Fix Home Network’s Easy setup guide for easy Linksys router setup and troubleshooting steps. This Guide is designed to work with almost all the models including Linksys E3200 router.

Источник

Linksys E3200 Login Instructions

This page shows you how to login to the Linksys E3200 router.

Other Linksys E3200 Guides

Find Your Linksys E3200 Router IP Address

The first thing that we need to know in order to login to the Linksys E3200 router is it’s internal IP address.

Known E3200 IP Addresses
192.168.1.1

Choose an IP address from the list above and then follow the rest of this guide.

If you do not find your router’s interface later in this guide, then try a different IP address. Keep trying different IP addresses until you find your router. It is harmless to try different IP addresses.

If, after trying all of the above IP addresses, you still cannot find your router, then do one of the following:

Choose an internal IP Address using one of the above methods and then try to login to your router.

Login to the Linksys E3200 Router

Your Linksys E3200 router has a web interface. In order to log in to it, you need to use a web browser, such as Chrome, Firefox, or Edge.

Enter Linksys E3200 Internal IP Address

Put the internal IP Address of your Linksys E3200 in the address bar of your web browser. The address bar will look like this:

Press the Enter key on your keyboard. You will be prompted for your Linksys E3200 password.

Linksys E3200 Default Username and Password

You need to know your username and password to login to your Linksys E3200. Just in case the router’s username and password have never been changed, you may want to try the factory defaults. Below is a list of all known Linksys E3200 default usernames and passwords.

Linksys E3200 Default Usernames and Passwords
Username	Password
admin	admin
blank	admin

In the window that pops up, enter your username and password. You can try them all.

Linksys E3200 Home Screen

Once you are logged in you will see the Linksys E3200 home screen, like this:

If you see this screen, then congratulations, you are now logged in to your Linksys E3200. You are ready to follow any of our other guides for this router.

Solutions To Linksys E3200 Login Problems

Here are some ideas to help if you are having problems getting logged in to your router.

Linksys E3200 Password Doesn’t Work

Your router’s factory default password might be different than what we have listed here. It doesn’t hurt to try all of the other known Linksys passwords. We have an extensive list of all Linksys Passwords that you can try.

Forgot Password to Linksys E3200 Router

If your ISP provided your router, then you may have to call them and ask them if they know how to login to your router. Sometimes they will have your password on file.

How to Reset the Linksys E3200 Router To Default Settings

The last option when you are unable to get logged in to your router is to reset it to the factory defaults. As a last resort, you can reset your router to factory defaults.

Other Linksys E3200 Guides

Here are some of our other Linksys E3200 info that you might be interested in.

Источник