Настройка роутера sagemcom cs 50001

sagemcom cs50001 Eir FTTH Router COnfiguration

Hi there,
I have recievied and am happy with my Eir FTTH connection , amazing speeds 300 MBPS package , but I am a little disappointed with the Router supplied. it has good wifi but from what I can see it is a Sagemcom cs 50001 and if you want to configure a different LAN ip or DHCP you need to ring technical support and they make the changes.
Does anyone have any experience of this router and how to configure it?

Essentially I would like to turn off DHCP and and just us the WIFI from the unit as i have my own router which as some extra features I need .

Comments

Just got FTTH and want to change from the default LAN CIDR 192.168.1.0/24 to 192.168.0.0/24 but in hitting apply it shows successful but stays at 192.168.1.0/24. I am successful in changing the DHCP range though.

I am able to apply the DHCP Server change but after i do a reboot it goes back to what it was previously.
I tried ringing EIR to ask them to switch off the DHCP and they took some time and eventually came back and said the DHCP was off . so I rebooted several times and it was still on . Note i had it connected directly to the Fibre to ensure it got whatever changes were being sent from the server .
I will ring them again tonight to ask them again.

Just rang Eir and they said it should work, but they wont provide support and can’t do it from their end! So in short, a PFO!

Interesting, I have just wasted hours trying to contact Eir support about this. Changing the DHCP was easy but changing the Router IP just would not stick. When I finaly got through to Eir Support they said it wasnt their issue. I explained it was either a software locked feature or a faulty modem and they asked for my account number and hung up!

Aside from that the new modem seems excellent. Throughput seems very good. I am now changing my whole network to match the modem range and gateway and most things are working well though in general I’m getting 600mbs on a 1gb link which is fine considering overhead.

If anyone finds a way to change the outer I would still be interested. Also curious is it support Link Aggregation.

Overhead wouldn’t chew up 400Mb!! Its just that router is junk. I’m getting much better wifi performance using my UniFi AP’s. Next I’m going to remove the provided router completely out of the equation and use my UniFi USG.

Sorry by overhead I should have added that I was connecting to a specific server many hops away in a different country. Local speed tests all show over 900Mbs but I was looking for a proper test. I have Unifi too but unfortunatly older models. I have heard of a few people swapping the Eir router out with no issues.

Does anyone have a problem with the Eir fibre modem blocking an android box connecting to it? Connects to Wifi but says internet not available and wont load Netflix on the box but it work on the Smart TV

Yes Parkowen, My Sony Android Tv is blocked by the new fibre box worked before change but I’m not sure if it’s the new box or the updated OS on the tv.

As it stends the modem is broken in my eyes. The thing doesnt do basic config. Nothing new from eircom. You can download sagemcom cfg tool and change it that way but thats just bull

I just had mine installed,

Half the devices in my house won’t stay connected to the WiFi, they save the network, work for a few seconds, then drop out again and the whole process loops over and over. These devices work fine on other WiFi networks so it’s nothing to do with the devices themselves, tried changing the WiFi channel the router was broadcasting on just in case the neighbour was using the same but no joy.

Has anyone else had this issue ?.

I only have an issue with two devices dropping out and at a glance it looks like some sort of DHCP issue. It only happens once or twice a day and 4G kicks in until it sorts itself out so I rarely notice. You could try a static IP if that was the issue. I have now turned off the Eir wifi totally. Probably not your cause but might be worth a try.

I just had mine installed,

Half the devices in my house won’t stay connected to the WiFi, they save the network, work for a few seconds, then drop out again and the whole process loops over and over. These devices work fine on other WiFi networks so it’s nothing to do with the devices themselves, tried changing the WiFi channel the router was broadcasting on just in case the neighbour was using the same but no joy.

Has anyone else had this issue ?.

Had to make an account to reply to this, i had the same issue with my phone after been changed to the new sagecom router. What i did was:
Login into the router as admin on

192.168.1.254 The password is the default WiFi Key printed on the back of the router/on the piece of paper the installer gave you

Click on the cog wheel beside «Internet connectivity»
Click on IPv6 and then click the enable «On» tab to turn «off» IPv6
Save
Click Eir in the banner and then «Modem Config» cog and then the maintenance tab. Then Restart. It will take about 3<>5 mins to reboot with IPv6 off and you shouldn’t have anymore issues with WiFi dropping out. I hope it works for you

Источник

Login to the Sagemcom CS 50001

This guide shows you exactly how to login to the Sagemcom CS 50001 router.

Other Sagemcom CS 50001 Guides

Find Your Sagemcom CS 50001 Router IP Address

We need to find your Sagemcom CS 50001 router’s internal IP address before we can log in to it.

Known CS 50001 IP Addresses
192.168.1.1

Pick one of these IP addresses and then follow the rest of this guide.

If later on in this guide you do not find your router using the IP address that you pick, then you can try different IP addresses until you get logged in. It is harmless to try different IP addresses.

If you try all of the above IP addresses and still cannot find your router, then you have the following options:

Once you have the internal IP Address of your router, you can log in to it.

Login to the Sagemcom CS 50001 Router

The Sagemcom CS 50001 is managed through a web-based interface. You need to use a web browser to manage it, such as Chrome, Edge, or Firefox.

Enter Sagemcom CS 50001 Internal IP Address

Type the internal IP address that you picked above in the address bar of your web browser. Your address bar should look something like this:

Press the Enter key on your keyboard. You will be prompted for your Sagemcom CS 50001 password.

Sagemcom CS 50001 Default Username and Password

You must know your Sagemcom CS 50001 username and password in order to log in. If you are not sure what the username and password are, then perhaps they are still set to the factory defaults. All of the default usernames and passwords for the Sagemcom CS 50001 are listed below.

Sagemcom CS 50001 Default Usernames and Passwords
Username	Password
admin	printed on router

Enter your username and password in the window that pops up. You should be able to try them all.

Sagemcom CS 50001 Home Screen

When you get logged in you should be at the Sagemcom CS 50001 home screen, which looks similar to this:

When you see this screen, then you are logged in to your Sagemcom CS 50001 router. At this point, you can follow any of our other guides for this router.

Solutions To Sagemcom CS 50001 Login Problems

Here are some things that you can try if you are having problems getting logged in to your router.

Sagemcom CS 50001 Password Doesn’t Work

Your router’s factory default password might be different than what we have listed here. Start by trying all of the other known Sagemcom passwords. Here is our list of all Sagemcom Passwords.

Forgot Password to Sagemcom CS 50001 Router

If your ISP provided your router, then you may have to call them and ask them if they know how to login to your router. Sometimes they will have your password on file.

How to Reset the Sagemcom CS 50001 Router To Default Settings

If you still cannot get logged in, then you are probably going to have to reset your router to its default settings. If all else fails and you are unable to login to your router, then you may have to reset it to its factory default settings.

Other Sagemcom CS 50001 Guides

Here are some of our other Sagemcom CS 50001 info that you might be interested in.

Источник