- How to configure 802.1Q VLAN on TP-Link Load Balance and VPN routers using the new GUI
- Looking for More
- Как настроить идентификатор VLAN для вашего интернет-соединения на Wi-Fi роутере (для нового логотипа)
- How to configure 802.1Q VLAN on TP-Link Load Balance and VPN routers using the new GUI
- Looking for More
- How to configure 802.1Q VLAN on TP-Link Load Balance and VPN routers using the new GUI
- Looking for More
How to configure 802.1Q VLAN on TP-Link Load Balance and VPN routers using the new GUI
Updated 06-27-2022 06:20:14 AM 140112
TL-R600VPN( V4 ) , TL-ER6120( V2 V3 ) , TL-ER6020( V2 ) , TL-ER5120( V3 V4 ) , TL-R480T+( V9 ) , TL-R470T+( V6 )
VLAN (Virtual Local Area Network) is a technology that can solve broadcasting issues. A LAN can be divided into several VLANs logically, and only the hosts in a same VLAN can communicate with each other.
Here is a configuration example of 802.1Q VLAN for TP-Link routers.
As the following figure shows, the switch connects to two different groups. It is required that the computers in the two groups cannot communicate with each other, but both of them can access the internet via the router.
Configuration Scheme
Configure 802.1Q VLAN on the router:
1) Create VLAN 2 and VLAN 3, and add port 5 (the LAN port) to both VLANs with the egress rule as Tagged.
Configure 802.1Q VLAN on the switch:
1) Create VLAN 2. Add port 1, 2 to VLAN 2.
2) Create VLAN 3. Add port 1, 3 to VLAN 3.
VLAN Configurations on the Router:
VLAN Configurations on the Switch:
Note: The PVID value “-” means you don’t need to configure the PVID for the corresponding port, just leave them as the default value.
Configuration Steps:
The router is demonstrated with TL-R600VPN, and the switch is demonstrated with TL-SG105E. The following section shows how to configure 802.1Q VLAN on the router and switch.
Choose the menu Network >VLAN > VLAN, click to load the configuration page. Create VLAN 2, 3 and add port 5 to both of the VLANs with the egress rule as Tag.
Choose the menu VLAN > 802.1Q VLAN to load the configuration page. Enable 802.1Q VLAN function. Add port 1, 2 to VLAN 2 and port1, 3 to VLAN 3 as untagged ports. Specify the egress rule of port 1 as tagged in VLAN 2and VLAN 3; specify the egress rule of port 2 in VLAN 2as untagged; specify the egress rule of port 3 in VLAN 3 as untagged.
Choose the menu VLAN > 802.1Q PVID Setting to load the configuration page. Configure the PVIDs for port 2-3 as 2 and 3 respectively, and leave the PVID of port 1 as the default value 1.
Looking for More
Is this faq useful?
Your feedback helps improve this site.
What’s your concern with this article?
- Dissatisfied with product
- Too Complicated
- Confusing Title
- Does not apply to me
- Too Vague
- Other
We’d love to get your feedback, please let us know how we can improve this content.
We appreciate your feedback.
Click here to contact TP-Link technical support.
Subscription We’re here to help!
TP-Link takes your privacy seriously. For further details on TP-Link’s privacy practices, see TP-Link’s Privacy Policy.
TP-Link understands your time is valuable and waiting for an agent to address your concern can daunting at times, so to help we also provide helpful FAQs , Videos and a Community Forum that can help you solve most concerns without ever having to pick up a phone, join a chat or send an email.
Как настроить идентификатор VLAN для вашего интернет-соединения на Wi-Fi роутере (для нового логотипа)
Дата последнего обновления: 10-18-2017 08:04:15 AM 625015
Archer C1200 , Archer C5400 , Archer A2600 , Archer AX55 , Archer C4 , Archer C5200 , Archer AX53 , Archer C5 , Archer AX10 , Archer C2 , Archer AX51 , Archer AX96 , Archer A2200 , Archer C6U , TL-WR1043N( V5 ) , Archer C80 , Archer AXE95 , Archer C8 , Archer AX10000 , Archer C3150 , Archer C9 , Archer AX50 , Archer C6 , Archer C7 , Archer AX90 , Archer AX6000 , Archer C5400X , Archer C25 , Archer C24 , Archer A20 , Archer A64 , Archer C60 , Archer C2600 , Archer A1200 , Archer C21 , Archer C20 , Archer C64 , Archer AX1800 , Archer AX206 , Archer C59 , Archer C58 , Archer AX4200 , Archer C3200 , Archer C900 , Archer A2 , Archer AX75 , Archer AX4400 , Archer C3000 , Archer AX73 , Archer C50 , Archer A10 , Archer A54 , Archer AX4800 , Archer C50 , Archer C1900 , Archer C55 , Archer C54 , Archer A2300 , Archer AXE75 , Archer A6 , Archer A7 , Archer AX72 , Archer AXE200 Omni , Archer A5 , Archer GX90 , Archer A8 , Archer A9 , Archer AX68 , Archer C2300 , Archer AX5300 , Archer AX23 , Archer AX20 , Archer C3150 V2 , Archer C4000 , Archer AX21 , Archer A3000 , Archer C2700 , Archer AXE300 , Archer AX1500 , Archer C90 , Archer AX60 , Archer AX11000 , Archer AX3200 , AD7200( V1 V2 ) , Archer AX3000
Некоторым интернет-провайдерам, таким как DoDo NBN и TPG FTTB в Австралии, необходимо настроить идентификатор VLAN для подключения к Интернету. Эта статья поможет вам настроить идентификатор VLAN через IPTV.
1. Если ваше интернет-соединение работает нормально, пожалуйста, проигнорируйте эту статью и просто сохраните настройки IPTV по умолчанию.
2. В этой статье в качестве примера приводится модель Archer C9.
3. Эта статья подходит пользователям, которым необходимо настроить идентификатор VLAN для подключения к Интернету.
Страница настройки IPTV.
Страница конфигурации, показанная ниже, используется для добавления тега VLAN для подключения к Интернету.
Сохраните версию IGMP Proxy и IGMP по умолчанию, если ваш интернет-провайдер не попросит вас их изменить.
Как правильно настроить идентификатор VLAN с помощью функции IPTV?
На странице настроек IPTV доступно несколько «режимов». Выберите режим «Указать вручную», если ваш интернет-провайдер отсутствует в списке.
1. Выберите режим «Указать вручную» и введите все выделенные параметры вручную, как показано ниже. Сначала проверьте данные у своего интернет-провайдера. Для настройки выполните следующие действия.
1) Выберите режим «Указать вручную», введите «Идентификатор VLAN для Интернет», предоставленный вашим провайдером.
Например, DoDo NBN предоставляет VLAN100 для интернет-сервиса, пользователь DoDo должен ввести 100 для «Идентификатор VLAN для Интернет».
2) Проверьте параметр «Тег 802.1Q» и оставьте настройки по умолчанию.
3) Введите два разных случайных числа (от 2 до 4094) для «Идентификатор VLAN для IP-телефона» и «Идентификатор VLAN для IPTV».
4) Выберите «Интернет» для всех портов LAN и нажмите «Сохранить».
2. Для пользователей ExStream (SG), Unifi (MY) или Maxis (MY):
Мы указали требуемые параметры в режимах «Singapore-ExStream», «Malaysia-Unifi» или «Malaysia-Maxis». Выберите своего провайдера и нажмите «Сохранить».
Был ли этот FAQ полезен?
Ваш отзыв поможет нам улучшить работу сайта.
Что вам не понравилось в этой статье?
- Недоволен продуктом
- Слишком сложно
- Неверный заголовок
- Не относится к моей проблеме
- Слишком туманное объяснение
- Другое
Как мы можем это улучшить?
Спасибо за обращение
Нажмите здесь, чтобы связаться с технической поддержкой TP-Link.
How to configure 802.1Q VLAN on TP-Link Load Balance and VPN routers using the new GUI
Updated 06-27-2022 06:20:14 AM 140114
TL-R600VPN( V4 ) , TL-ER6120( V2 V3 ) , TL-ER6020( V2 ) , TL-ER5120( V3 V4 ) , TL-R480T+( V9 ) , TL-R470T+( V6 )
VLAN (Virtual Local Area Network) is a technology that can solve broadcasting issues. A LAN can be divided into several VLANs logically, and only the hosts in a same VLAN can communicate with each other.
Here is a configuration example of 802.1Q VLAN for TP-Link routers.
As the following figure shows, the switch connects to two different groups. It is required that the computers in the two groups cannot communicate with each other, but both of them can access the internet via the router.
Configuration Scheme
Configure 802.1Q VLAN on the router:
1) Create VLAN 2 and VLAN 3, and add port 5 (the LAN port) to both VLANs with the egress rule as Tagged.
Configure 802.1Q VLAN on the switch:
1) Create VLAN 2. Add port 1, 2 to VLAN 2.
2) Create VLAN 3. Add port 1, 3 to VLAN 3.
VLAN Configurations on the Router:
VLAN Configurations on the Switch:
Note: The PVID value “-” means you don’t need to configure the PVID for the corresponding port, just leave them as the default value.
Configuration Steps:
The router is demonstrated with TL-R600VPN, and the switch is demonstrated with TL-SG105E. The following section shows how to configure 802.1Q VLAN on the router and switch.
Choose the menu Network >VLAN > VLAN, click to load the configuration page. Create VLAN 2, 3 and add port 5 to both of the VLANs with the egress rule as Tag.
Choose the menu VLAN > 802.1Q VLAN to load the configuration page. Enable 802.1Q VLAN function. Add port 1, 2 to VLAN 2 and port1, 3 to VLAN 3 as untagged ports. Specify the egress rule of port 1 as tagged in VLAN 2and VLAN 3; specify the egress rule of port 2 in VLAN 2as untagged; specify the egress rule of port 3 in VLAN 3 as untagged.
Choose the menu VLAN > 802.1Q PVID Setting to load the configuration page. Configure the PVIDs for port 2-3 as 2 and 3 respectively, and leave the PVID of port 1 as the default value 1.
Looking for More
Is this faq useful?
Your feedback helps improve this site.
What’s your concern with this article?
- Dissatisfied with product
- Too Complicated
- Confusing Title
- Does not apply to me
- Too Vague
- Other
We’d love to get your feedback, please let us know how we can improve this content.
We appreciate your feedback.
Click here to contact TP-Link technical support.
Subscription TP-Link takes your privacy seriously. For further details on TP-Link’s privacy practices, see TP-Link’s Privacy Policy.
How to configure 802.1Q VLAN on TP-Link Load Balance and VPN routers using the new GUI
Updated 06-27-2022 06:20:14 AM 140113
TL-R600VPN( V4 ) , TL-ER6120( V2 V3 ) , TL-ER6020( V2 ) , TL-ER5120( V3 V4 ) , TL-R480T+( V9 ) , TL-R470T+( V6 )
VLAN (Virtual Local Area Network) is a technology that can solve broadcasting issues. A LAN can be divided into several VLANs logically, and only the hosts in a same VLAN can communicate with each other.
Here is a configuration example of 802.1Q VLAN for TP-Link routers.
As the following figure shows, the switch connects to two different groups. It is required that the computers in the two groups cannot communicate with each other, but both of them can access the internet via the router.
Configuration Scheme
Configure 802.1Q VLAN on the router:
1) Create VLAN 2 and VLAN 3, and add port 5 (the LAN port) to both VLANs with the egress rule as Tagged.
Configure 802.1Q VLAN on the switch:
1) Create VLAN 2. Add port 1, 2 to VLAN 2.
2) Create VLAN 3. Add port 1, 3 to VLAN 3.
VLAN Configurations on the Router:
VLAN Configurations on the Switch:
Note: The PVID value “-” means you don’t need to configure the PVID for the corresponding port, just leave them as the default value.
Configuration Steps:
The router is demonstrated with TL-R600VPN, and the switch is demonstrated with TL-SG105E. The following section shows how to configure 802.1Q VLAN on the router and switch.
Choose the menu Network >VLAN > VLAN, click to load the configuration page. Create VLAN 2, 3 and add port 5 to both of the VLANs with the egress rule as Tag.
Choose the menu VLAN > 802.1Q VLAN to load the configuration page. Enable 802.1Q VLAN function. Add port 1, 2 to VLAN 2 and port1, 3 to VLAN 3 as untagged ports. Specify the egress rule of port 1 as tagged in VLAN 2and VLAN 3; specify the egress rule of port 2 in VLAN 2as untagged; specify the egress rule of port 3 in VLAN 3 as untagged.
Choose the menu VLAN > 802.1Q PVID Setting to load the configuration page. Configure the PVIDs for port 2-3 as 2 and 3 respectively, and leave the PVID of port 1 as the default value 1.
Looking for More
Is this faq useful?
Your feedback helps improve this site.
What’s your concern with this article?
- Dissatisfied with product
- Too Complicated
- Confusing Title
- Does not apply to me
- Too Vague
- Other
We’d love to get your feedback, please let us know how we can improve this content.
We appreciate your feedback.
Click here to contact TP-Link technical support.
Subscribe TP-Link takes your privacy seriously. For further details on TP-Link’s privacy practices, see TP-Link’s Privacy Policy.
Be The First To Get Exclusive Deals & News