Network connections linux wifi

Configure WiFi Connections

This section explains how to establish a WiFi connection. It covers creating and modifying connections as well as directly connecting.

Establish a Wireless Connection

This section will show how to establish a wifi connection to the wireless network. Note that directly connecting will implicitly create a connection (that can be seen with “nmcli c”). The naming of such will follow “SSID N” pattern, where N is a number.

First, determine the name of the WiFi interface:

$ nmcli d DEVICE TYPE STATE CONNECTION . wlan0 wifi disconnected -- 

Make sure the WiFi radio is on (which is its default state):

Then, list the available WiFi networks:

$ nmcli d wifi list * SSID MODE CHAN RATE SIGNAL BARS SECURITY . my_wifi Infra 5 54 Mbit/s 89 ▂▄▆█ WPA2 

As an example, to connect to the access point ‘my_wifi’, you would use the following command:

$ nmcli d wifi connect my_wifi password

is the password for the connection which needs to have 8-63 characters or 64 hexadecimal characters to specify a full 256-bit key.

Connect to a Hidden Network

A hidden network is a normal wireless network that simply does not broadcast it’s SSID unless solicited. This means that its name cannot be searched and must be known from some other source.

Issue the following command to create a connection associated with a hidden network :

$ nmcli c add type wifi con-name ifname wlan0 ssid $ nmcli c modify wifi-sec.key-mgmt wpa-psk wifi-sec.psk

Now you can establish a connection by typing:

is an arbitrary name given to the connection and is the password to the network. It needs to have between 8-63 characters or 64 hexadecimal characters in order to specify a full 256-bit key.

Читайте также:  Основы работы на линукс

Further Information

You will find further information and more detailed examples on following pages:

Источник

Оцените статью
Adblock
detector