Пароль роутера fritz box 6490

FRITZ Passwords

Here is a list of all the username and password combinations that we are aware of for FRITZ routers.

These are the factory default passwords for FRITZ routers. If you have changed the password in your router, then you need to use the new password that you have set.

This list does not include FRITZ WiFi passwords and will not help you connect to your WiFi network.

How To Login to a FRITZ Router

FRITZ routers have many settings that can be adjusted depending on your needs, such as WiFi network name, password, parental controls, and traffic prioritization. To access these settings, you need to login to your router’s built-in firmware.

To access your router’s settings, you can use a standard web browser such as Chrome, Firefox, or Edge. It does not matter which web browser you use.

In general, the steps to log in to a FRITZ router are the same no matter which model of router you have. Here’s what you do:

• Find your router’s internal IP address.
• Put that IP address in your web browser address bar.
• Login with your router’s username and password.

We cover all of these steps below, including how to find your router’s IP address and a list of all known default FRITZ passwords.

Find Your FRITZ Router’s IP Address

To login to your router, you need to know it’s IP address. All FRITZ routers have 2 IP addresses, but we are only interested in your router’s internal IP address.

• Internal IP address — used for local configuration from inside your network.
• External IP address — used by your friends and coworkers to connect to you from the internet side of things.

Since we are configuring your router from inside your network, we need to know the internal IP address. From here on, for simplicity, we will refer to your router’s internal IP address as it’s IP address. Just remember that whenever we say IP address, we mean internal IP address.

You can find your router’s IP address any of the following ways:

• Try all known FRITZ IP addresses.
• Follow our guide called Find Your Router’s Internal IP Address.
• Use our free software called Router Detector.

The simplest way to find your FRITZ IP address is to try all known default IP addresses. Here are all the known default FRITZ IP addresses.

FRITZ Model	IP Address
6490 Cable	169.254.1.1
6490 Cable	192.168.178.1
6490 Cable	http://fritz.box/
7490	169.254.1.1
7490	192.168.178.1
7490	http://fritz.box/
7590	192.168.178.1
7590	http://fritz.box/
Box 6890 LTE	192.168.178.1
Box 6890 LTE	http://169.254.1.1
Box 6890 LTE	http://fritz.box/
Box 7582	192.168.1.1
WLAN 7360	192.168.178.1
WLAN 7360	fritz.box
WLAN 7360 v2	192.168.178.1

Start with the first IP address in the list and try to login to your router with it. To login to your router, follow the steps outlined below.

If the IP address you picked does not work, then try a different one. It is harmless to try all the listed IP addresses since the only thing that we are doing here is trying to access the firmware settings of your router.

How To Login To a FRITZ Router

Once you have an IP address that you want to try, it’s time to use your web browser to log in. Find the address bar in your web browser. It looks something like this:

Type your router’s IP address into the address bar and press the Enter key on your keyboard. You should see either your router’s home screen or a screen asking for your username and password.

If you do not see anything or you get an error that says This site can’t be reached then the IP address that you are trying is wrong. Go back to the list of IP addresses above and try a different one.

If you try all the IP addresses above and still cannot log in, then you can follow our How to Find Your Router’s IP Address guide.

FRITZ Default Username and Password

You need to know your FRITZ username and password to login to your router. If you are not sure what your router’s username and password are, then your router may still be set to the factory defaults. If your password does not work, you can try all the default FRITZ passwords and see if any of them work. Keep trying them all until you get logged in.

Some routers lock you out after trying too many incorrect passwords. If this happens, then just let it timeout for a minute and try again.

Forgot FRITZ Password

If you have changed your FRITZ password and forgot it, then you have the following choices:

Resetting your router can be a very time-consuming process and may require contacting your ISP to get connected to the internet again. Please do not reset your router until you have tried every other way of getting logged in.

Источник

FRITZ 6490 Cable Default Router Login

To get access to your FRITZ 6490 Cable, you need the IP of your device, the username and password. You’ll find such information in the Manual of your FRITZ 6490 Cable router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it’s necessary that you are connected to the router.

FRITZ 6490 Cable Login Guide

• Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
• Type 192.168.178.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface.
• You should see 2 text fields where you can enter a username and a password.
• The default username for your FRITZ 6490 Cable is admin.
  The default password is admin.
• Enter the username & password, hit «Enter» and now you should see the control panel of your router.

If above login credentials doesn’t work with your FRITZ 6490 Cable router then try this method

Try different ID/password combinations that are widely used by FRITZ that you’ll find below. In this list are the most popular default username and password combinations used by FRITZ. Sometimes the username and password doesn’t work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your FRITZ 6490 Cable wireless router.

#	Username	Password
1	(blank)	(blank)
2	(blank)
3	admin	admin

Default login IPs for my FRITZ router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer FRITZ. Maybe this will work for you.

#	Default Router IP
1	192.168.178.1
2	169.254.1.1

Nothing of the methods worked for me and I still not get access to my FRITZ 6490 Cable!

All you need to do is to reset your 6490 Cable modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert’s assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.

Источник

Login to the FRITZ 6490 Cable

Here are instructions for logging in to the FRITZ 6490 Cable router.

Other FRITZ 6490 Cable Guides

Find Your FRITZ 6490 Cable Router IP Address

In order to login to the FRITZ 6490 Cable router, we need to know it’s internal IP address.

Known 6490 Cable IP Addresses
192.168.178.1
169.254.1.1
http://fritz.box/

Choose an IP address from the list above and then follow the rest of this guide.

If you do not find your router’s interface later in this guide, then try a different IP address. Keep trying different IP addresses until you find your router. It should be completely harmless to try different IP addresses.

If you try all of the above IP addresses and still cannot find your router, then you have the following options:

Choose an internal IP Address using one of the above methods and then try to login to your router.

Login to the FRITZ 6490 Cable Router

The FRITZ 6490 Cable router has a web-based interface. In order to log in to it, you need to use a web browser, such as Chrome, Firefox, or Edge.

Enter FRITZ 6490 Cable Internal IP Address

Find the address bar in your web browser and type in the internal IP address of your FRITZ 6490 Cable router. The address bar will look like this:

Press the Enter key on your keyboard. You should see a window pop up asking you for your FRITZ 6490 Cable password.

FRITZ 6490 Cable Default Username and Password

You must know your FRITZ 6490 Cable username and password in order to log in. If you are not sure what the username and password are, then perhaps they are still set to the factory defaults. Try all of the FRITZ 6490 Cable factory default usernames and passwords below.

FRITZ 6490 Cable Default Usernames and Passwords
Username	Password
none	printed on router

Enter your username and password in the window that pops up. Keep trying them all until you get logged in.

FRITZ 6490 Cable Home Screen

You should now see the FRITZ 6490 Cable home Screen, which looks similar to this:

If you see this screen, then you know that you are logged in to your FRITZ 6490 Cable router. Now you can follow any of our other guides for this router.

Solutions To FRITZ 6490 Cable Login Problems

If you cannot get logged in to your router, here a few possible solutions you can try.

FRITZ 6490 Cable Password Doesn’t Work

Your router’s factory default password might be different than what we have listed here. You can try other FRITZ passwords. Here is our list of all FRITZ Passwords.

Forgot Password to FRITZ 6490 Cable Router

If you are using an ISP provided router, then you may need to call their support desk and ask for your login information. Most of the time they will have it on file for you.

How to Reset the FRITZ 6490 Cable Router To Default Settings

As a last resort, you can reset your router to factory defaults. If all else fails and you are unable to login to your router, then you may have to reset it to its factory default settings.

Other FRITZ 6490 Cable Guides

Here are some of our other FRITZ 6490 Cable info that you might be interested in.

Источник

Forgot password for the FRITZ!Box user interface

You forgot the FRITZ!Box password? ✔ Here you can find out how to log into the user interface again.

You can protect the user interface of your FRITZ!Box against unauthorized access with a password of your choice. In the factory settings, either no password is set, or you can find the password on the bottom of the FRITZ!Box. If you set your own password and forgot it, reset the password or load the FRITZ!Box’s factory settings. Then you can log in again and set a new password.

1 Resetting the password

If you are offered the option of sending a push service mail, have an email sent to you that contains an access link that you can use to reset the password:

1. Open the FRITZ!Box user interface.
2. Click the «Forgot your password?» link.
3. Click the «Send push service mail» button. If the button is not displayed, then the necessary service is not configured.
4. Call up the email with the same device you used to request the push service mail and click the link in the email to assign a new password. If you did not receive an email, either the email account information was entered incorrectly, or the FRITZ!Box is not connected to the internet. Important: The email may have been classified as unsolicited advertising (spam). In this case, also check the spam folder of your email inbox.
5. If you use a username and FRITZ!Box password to access the user interface, click the (edit) button for the respective user and enter a new password.
6. If you only use the FRITZ!Box password to access the user interface, a FRITZ!Box user was created automatically. Click the (Edit) button for this user and enter a new password.
7. Click «Apply» to save the settings.

2 Loading the factory settings and reconfiguring the FRITZ!Box

If you are not offered the option of sending a push service mail or you did not receive the email, you cannot open the user interface again until you load the factory settings:

Loading the factory settings

1. Unplug the FRITZ!Box.
2. Plug the FRITZ!Box back in after 1 minute.
3. Open the FRITZ!Box user interfacewithin the next 10 minutes.
4. Click the «Forgot your password?» link.
5. Click the «Restore Factory Settings» button.
6. After you load the factory settings, open the FRITZ!Box user interface.
7. If you are asked for a password, enter the password given on the underside of your FRITZ!Box and click «Log In».

Configuring the FRITZ!Box

1. Reconfigure the FRITZ!Box. If you previously saved the FRITZ!Box settings, restore the settings.
2. When doing so, select the option «Select manually the settings to be restored» and make sure that you do not select «FRITZ!Box user» because this will restore the FRITZ!Box password.
3. Set up the MyFRITZ! report so you can simply have the password sent to you via email in the future.

Источник