Перезагрузка сетевых интерфейсов linux centos

Содержание
  1. 6 different commands to restart network in RHEL/CentOS 7/8
  2. Some Background and Changes with RHEL/CentOS 8
  3. How to check if interface is configured with NetworkManager
  4. Method 1: Using systemctl restart NetworkManager
  5. Method 2: Using ifup and ifdown
  6. On RHEL/CentOS 8 with NetworkManager
  7. On RHEL/CentOS 8 without NetworkManager
  8. Method 3: Using nmcli networking
  9. Method 4: using nmcli con up and down
  10. Method 5: Using nmtui
  11. 🛠️ Как перезапустить сетевые сервисы в CentOS / RHEL 8
  12. Использование Network Manager
  13. Использование инструмента nmcli
  14. You may also like
  15. 📜 Чтение файла построчно на Bash
  16. 📧 В чем разница между IMAP и POP3
  17. ✔️ Как управлять контейнерами LXD от имени обычного.
  18. 📜 Руководство для начинающих по созданию первого пакета.
  19. Феноменальная популярность электроники Xiaomi: основные причины
  20. 📜 Получение вчерашней даты в Bash: Практическое руководство
  21. Использование специальных гелей при мышечных болях
  22. 🐧 Сравнение команд Printf и Echo на Linux
  23. 📦 Как расширить/увеличить файловую систему VxFS на Linux
  24. Услуги по размещению серверного оборудования в ЦОД
  25. Leave a Comment Cancel Reply
  26. • Свежие записи
  27. • Категории
  28. • Теги
  29. • itsecforu.ru
  30. • Страны посетителей
  31. IT is good

6 different commands to restart network in RHEL/CentOS 7/8

In this tutorial I will share different methods you can use to restart your network with RHEL/CentOS environment. I will cover both RHEL/CentOS 7 and 8 releases as with RHEL/CentOS 8 there are some major changes in terms of how networking is handled. Now Red Hat is completely moving towards Network Manager and is trying to ditch the legacy initscripts.

Some Background and Changes with RHEL/CentOS 8

If you are coming from RHEL/CentOS 5 or 6 then you will be familiar with SysV scripts to restart any service i.e.

With RHEL/CentOS 7 the SysV scripts are deprecated (although you may still use these commands but they can be removed any time and shouldn’t be used). Now all the system services, partitions, sockets are handled by systemd. But that is a different topic altogether, now with RHEL/CentOS 7 we used

# systemctl restart network

But with RHEL/CentOS 8 we get below error for this command

# systemctl restart network Failed to restart network.service: Unit network.service not found.

This is because with RHEL/CentOS 7, the network scripts were part of initscripts rpm, which is removed as part of RHEL/CentOS 8 and is migrated to network-scripts rpm
I have already written a detailed guide on this topic and the steps to use legacy network restart commands.

Now considering all these changes, we have multiple methods which we can use to restart network in RHEL/CentOS release. But before we jump there, let us understand if our interface is managed by NetworkManager or not as your command and steps to restart network would vary accordingly.

Читайте также:  All system call linux

How to check if interface is configured with NetworkManager

There are couple of methods to verify if your Ethernet is configured via NetworkManager or manually using ip command or some other method:

Use nmcli con show to list the active connections

# nmcli con show NAME UUID TYPE DEVICE eth0 31e959d2-1c5f-46ea-a122-1f4c0f74d938 ethernet eth0

If you can see your interface in the output then it means that the interface is configured with NetworkManager

Alternatively grep for NM_CONTOLLED in /etc/sysconfig/network-scripts/ifcfg-ethXX

# grep NM_CONTROLLED /etc/sysconfig/network-scripts/ifcfg-eth1 NM_CONTROLLED=no

It is also possible you get a blank output, in such case you can use nmcli to verify but most likely the interface was configured with NetworkManager which is why you don’t see any entry for NM_CONTROLLED .

So now you know if your interface is configured via NetworkManager or not.

Since I have disabled consistent network device naming, the interface is shown as ethXX , in your case the interface name may vary.

Method 1: Using systemctl restart NetworkManager

You can use nmcli or nmtui to configure your network. Once the network configuration is done, you can use systemctl to restart the NetworkManager service

# systemctl restart NetworkManager

This should update your network changes. But if your network is not managed by NetworkManager , this command will do no change to your interface configuration.

Method 2: Using ifup and ifdown

Use this command with precaution as this can bring down your active interface which you may be using for SSH connections locking you out of the system. The only way to recover the network access by connecting to your server via console.

On RHEL/CentOS 8 with NetworkManager

With RHEL/CentOS 8, the ifup and ifdown commands are part of NetworkManager rpm unlike older releases where these were part of initscripts rpm.

# rpm -qf `which ifup` NetworkManager-1.20.0-3.el8.x86_64

So since you are using NetworkManager , you can also use ifup and ifdown to refresh the network configuration of any interface. For example you did some changes for eth1 , so to refresh the changes first bring down the interface and then bring it up

It is important that you execute the command in this format as if you try to execute separately then your server may become unreachable.

This should update your network configuration.

On RHEL/CentOS 8 without NetworkManager

On RHEL/CentOS 8 if your network interface is not managed by NetworkManager then you must install network-scripts to be able to use ifup and ifdown command.

Читайте также:  Clear temp file in linux

On RHEL system you must have an active subscription to RHN or you can configure a local offline repository using which «yum» package manager can install the provided rpm and it’s dependencies.

# dnf -y install network-scripts

Next you can check the rpm ownership for ifup

# rpm -qf `which ifup` NetworkManager-1.20.0-3.el8.x86_64 network-scripts-10.00.4-1.el8.x86_64

Now ifup is part of both NetworkManager and network-scripts rpm. Next you can use ifdown eth1 && ifup eth1

# ifdown eth1 && ifup eth1 WARN : [ifdown] You are using 'ifdown' script provided by 'network-scripts', which are now deprecated. WARN : [ifdown] 'network-scripts' will be removed in one of the next major releases of RHEL. WARN : [ifdown] It is advised to switch to 'NetworkManager' instead - it provides 'ifup/ifdown' scripts as well.

Similar WARN is visible for ifup action.

ifup and ifdown interface

Since network-scripts is added just to support fallback behaviour, it throws WARNING every time you use ifup or ifdown without NetworkManager .

Method 3: Using nmcli networking

We can also use the command-line tool » nmcli networking » for controlling NetworkManager to restart network and update network configuration.

# nmcli networking off && nmcli networking on

This command will bring down all the NetworkManager interfaces and then will bring them up.
IMPORTANT: It is important that you execute the command in this format as if you try to execute separately then your server may become unreachable as the first command will bring down all the NetworkManager managed interfaces

Method 4: using nmcli con up and down

With nmcli we can also use nmcli con up or con down similar to traditional ifup and ifdown to de-activate and activate individual network interface instead of restarting all the networking interfaces on the server.

# nmcli con down eth1 && nmcli con up eth1 Connection 'eth1' successfully deactivated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/14) Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/15)

IMPORTANT: It is important that you execute the command in this format as if you try to execute separately then your server may become unreachable as the first command will bring down all the NetworkManager managed interfaces

Method 5: Using nmtui

We also have NetworkManager TUI which is an alternative to nmcli command. Users who are not comfortable with nmcli command line, they can use nmtui to manage their network
To de-activate or activate a network interface using nmtui , execute nmtui as root user on the Linux server terminal

Читайте также:  Realtek r8169 linux drivers

This should open a window, next select «Activate a Connection» to update the network configuration

centos restart network

Select the interface which you would wish to deactivate and re-activate.

If you deactivate your active interface then your SSH connection will be lost. If you intend to restart network for primary interface then you must use nmtui from graphical console independent of SSH or network connection.

centos restart network

Next Activate the respective interface

centos restart network

Once your interface is active, you can come back and exit the nmtui session.

Источник

🛠️ Как перезапустить сетевые сервисы в CentOS / RHEL 8

В CentOS / RHEL 8 скрипты сетевых служб больше не представлены (systemctl start network.service или /etc/init.d/network скрипт).

Использование Network Manager

Используйте команду systemctl для перезапуска службы / цели NetworkManager, как показано ниже:

# systemctl restart NetworkManager

Использование инструмента nmcli

Примечание. Запустите эти команды из графического интерфейса или консоли, так как сеть отключится.

# nmcli networking off # nmcli networking on
# nmcli networking off; nmcli networking on
itisgood
⛑️ Как загрузить в Rescue Mode и Emergency Mode через Systemd в CentOS / RHEL 7 и 8
👾 Что такое End Of Life (EOL) в вычислительной технике?

You may also like

📜 Чтение файла построчно на Bash

📧 В чем разница между IMAP и POP3

✔️ Как управлять контейнерами LXD от имени обычного.

📜 Руководство для начинающих по созданию первого пакета.

Феноменальная популярность электроники Xiaomi: основные причины

📜 Получение вчерашней даты в Bash: Практическое руководство

Использование специальных гелей при мышечных болях

🐧 Сравнение команд Printf и Echo на Linux

📦 Как расширить/увеличить файловую систему VxFS на Linux

Услуги по размещению серверного оборудования в ЦОД

Leave a Comment Cancel Reply

• Свежие записи

• Категории

• Теги

• itsecforu.ru

• Страны посетителей

IT is good

В этой статье вы узнаете, как удалить удаленный Git-репозиторий. Процесс прост, но его полезно запомнить, чтобы избежать неожиданностей в будущем. Git – это…

В 11-й версии своей операционной системы Microsoft серьезно переработала интерфейс и убрала несколько привычных функций. Нововведения не всем пришлись по душе. Мы дадим…

Продажа ноутбука нередко становится хлопотным занятием. Кроме поиска покупателя, продавцу необходимо подготовить устройство перед проведением сделки. Но если последовательно выполнить все шаги, ничего…

Вы можете оказаться в ситуации, когда вам нужно использовать скрипт шелла для чтения файлов построчно. В этом руководстве я расскажу о нескольких способах…

Вторичное жильё выгоднее для молодых семей, желающих приобрести свою первую квартиру. Сталкиваясь с ипотечным кредитованием, можно избежать много лишней суеты и проблем, если…

Источник

Оцените статью
Adblock
detector