Плагин для wifi cura

MKS WiFi plugin

MKS WiFi plugin for Cura developed by Makerbase, Jeredian and Elkin-Vasily and it was originaly migrated from https://github.com/makerbase-mks/Software after V4.4 version.

Using the plugin with Cura, you can:

  • Connect Cura to the MKS Robin WiFi and MKS TFT WiFi;
  • Control your 3D printer wirelessly with Cura;
  • Transfer .gcode files to a printer with 100kbyte/s speed;
  • Get preview on 3D printer srceen when using MKS Robin TFT35 or MKS TFT35 LCD.

Installation

Manually with .curapackage:

  • Download .curapackage file of the selected release;
  • Open Cura on the Prepare tab;
  • Drag and drop .curapackage on this tab.
  • Download or clone this repository;
  • Open Cura configuration folder. It can be found via Help -> Show Configuration Folder inside Cura;
  • Copy folder into [Cura configuration folder]/plugins/ ;
  • Restart Cura.
  • Latest version of MKS WiFi plugin is only available for Cura 5.0 or higher version;
  • For Cura versions 4.7-4.13.1 please manually install version 1.3.2;
  • For Cura versions 4.5-4.6 please manually install version 1.2.2.

Troubleshooting

Please create a new GitHub issue and provide all details according to the template.

Or you can ask a question in our Telegram group.

Translation

To create new translation, or improve existing one, please check automatic translation guide or manual translation guide.

Funding

The development of this plugin can be sponsored via Paypal or Yoomoney

Open Source Agenda is not affiliated with «Mks Wifi Plugin» Project. README Source: Jeredian/mks-wifi-plugin

Источник

Saved searches

Use saved searches to filter your results more quickly

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session. You switched accounts on another tab or window. Reload to refresh your session.

Читайте также:  Raspberry pi configure wifi

License

Jeredian/mks-wifi-plugin

This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

Sign In Required

Please sign in to use Codespaces.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

MKS WiFi plugin for Cura developed by Makerbase, Jeredian and Elkin-Vasily and it was originaly migrated from https://github.com/makerbase-mks/Software after V4.4 version.

Using the plugin with Cura, you can:

  • Connect Cura to the MKS Robin WiFi and MKS TFT WiFi;
  • Control your 3D printer wirelessly with Cura;
  • Transfer .gcode files to a printer with 100kbyte/s speed;
  • Get preview on 3D printer srceen when using MKS Robin TFT35 or MKS TFT35 LCD.

Manually with .curapackage:

  • Download .curapackage file of the selected release;
  • Open Cura on the Prepare tab;
  • Drag and drop .curapackage on this tab.
  • Download or clone this repository;
  • Open Cura configuration folder. It can be found via Help -> Show Configuration Folder inside Cura;
  • Copy folder into [Cura configuration folder]/plugins/ ;
  • Restart Cura.
  • Latest version of MKS WiFi plugin is only available for Cura 5.0 or higher version;
  • For Cura versions 4.7-4.13.1 please manually install version 1.3.2;
  • For Cura versions 4.5-4.6 please manually install version 1.2.2.

Please create a new GitHub issue and provide all details according to the template.

Or you can ask a question in our Telegram group.

To create new translation, or improve existing one, please check automatic translation guide or manual translation guide.

The development of this plugin can be sponsored via Paypal or Yoomoney

Источник

Saved searches

Use saved searches to filter your results more quickly

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session. You switched accounts on another tab or window. Reload to refresh your session.

Releases: Jeredian/mks-wifi-plugin

1.4.2

What’s Changed

New

  • [MWP-358] Drive prefix feature added @Elkin-Vasily (#360)
  • [MWP-353] Cyrrilic filename rename @Elkin-Vasily (#355)
  • [MWP-344] Check SD card message @Elkin-Vasily (#348)

Bug Fixes

Maintenance

Dependency Updates

Contributors

1.4.1

What’s Changed

New

Bug Fixes

Maintenance

  • [MWP-328] Fix sonarqube code smells @Jeredian (#329)
  • [MWP-322] Update feature labels for versioning @Jeredian (#327)
  • [MWP-309] Translation workflow with PR @Elkin-Vasily (#325)
  • [CI] Translation update @github-actions (#326)
Читайте также:  Раздача wifi kali linux

Documentation

Dependency Updates

Community

Contributors

1.4.0

What’s Changed

New

Bug Fixes

  • [MWP-271] Reset old settings after plugin updated @Jeredian (#310)
  • [MWP-301] Visual fixes @Elkin-Vasily (#306)
  • [MWP-235] Print autostart checkbox added to plugin settings @Elkin-Vasily (#285)

Maintenance

Dependency Updates

Other changes

  • Qt6 migration — pt2 @ParkerK (#292)
  • Qt6 migration @ParkerK (#288)
  • Fix the infinite connect / disconnect loop @ParkerK (#290)
  • [MWP-283] German translation added @Elkin-Vasily (#284)

Contributors

1.3.2

What’s Changed

Bug Fixes

Contributors

1.3.1

What’s Changed

Bug Fixes

Contributors

1.3.0

What’s Changed

New

Bug Fixes

  • [MWP-58] Plugin functions rewritten @Elkin-Vasily (#257)
  • [MWP-253] Wanhao D12 index fix @Elkin-Vasily (#254)
  • [MWP-244] Monitor tab alignement fix @Elkin-Vasily (#245)
  • [MWP-129] Connection procedure when printer start before Cura fix @Elkin-Vasily (#236)

Maintenance

  • [MWP-266] Add «type: community» label to the versioning @Jeredian (#267)
  • [MWP-248] Add codeowners file @Jeredian (#264)
  • [MWP-251] Zeroconf removed @Elkin-Vasily (#252)

Dependency Updates

  • [MWP-261] Support the 7.9.0 version of SDK for Cura 4.13.0+ @Jeredian (#263)
  • [MWP-255] Arachne beta 2 support added @Elkin-Vasily (#256)

Other changes

Contributors

1.2.6

What’s Changed

  • [MWP-207] [DEV] Release 1.2.6-dev by @Jeredian in #209
  • [MWP-212] Wrong printing time by @Elkin-Vasily in #213
  • [MWP-214] Wrong printer model on screenshot tab by @Elkin-Vasily in #215
  • [MWP-199] IP list fix by @Elkin-Vasily in #217
  • [MWP-175] Selected IP did not remove when WiFi support turns off by @Elkin-Vasily in #216
  • [MWP-218] Support the 7.8.0 version of SDK for Cura 4.12 by @Elkin-Vasily in #219
  • [MWP-211] Saving as TFT file for a .ufp file comes with an error fixed by @Elkin-Vasily in #220
  • [MWP-115] [BUG]1.2.0 MKS WiFi Delete file fails by @Elkin-Vasily in #221
  • [MWP-222] QNetworkAccessManager changed by Uranium HttpRequestManager by @Elkin-Vasily in #223
  • [MWP-224] Monitor tab print progress bar by @Elkin-Vasily in #225
  • [MWP-228] File transfer cancel error fix by @Elkin-Vasily in #229
  • [MWP-226] Preview adds on postprocessing by @Elkin-Vasily in #227
  • [MWP-230] UnifiedConnectionState replaced with ConnectionState by @Elkin-Vasily in #231
  • [MWP-210] [DEV] Release 1.2.6 by @Jeredian in #237

Contributors

1.2.6-RC2

Источник

Saved searches

Use saved searches to filter your results more quickly

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session. You switched accounts on another tab or window. Reload to refresh your session.

MKS wifi plugin for Cura with Neptune 3 Pro/Plus/Max thumbnail support

License

finict/mks-wifi-plugin-N3

This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

Читайте также:  Wavelink wifi repeater настройка

Sign In Required

Please sign in to use Codespaces.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

MKS WiFi plugin with N3P thumbnail support

Tested on Neptune 3 Pro with Cura5.3.1 and MKSWiFiPlugin1.4.2 (should work on Plus/Max)

If you already installed original MKS WiFi Plugin jump to instruction 3

  1. Install MKS WiFi plugin at Cura Marketplace
  2. Restart Cura (Required)
  3. Download ELEGOO Cura $\color>$here (Slicing Software section)
  4. Open downloaded exe binary $\color>$ use with 7zip etc.
  5. find specific binary in [ARCHIVE]/plugins/MKS Plugin folder
    1. Windows ColPic_X64.dll
    2. Linux libColPic.so
    3. Mac libColPic.dylib
    1. Windows %appdata%/cura/[VERSION]/plugins/MKSWiFiPlugin/MKSWiFiPlugin
    2. Linux —
    3. Mac —
    1. Select Neptune 3 Pro/Plus/Max
    2. Push MKS WiFi Plugin button
    3. Check the MKS WiFi Plugin is active for this printer
    4. Move Preview settings tab
      1. Check Screenshot support
      2. Printer model to Custom
      3. Simage to 160
      4. Gimage to 200

      MKS WiFi plugin for Cura developed by Makerbase, Jeredian and Elkin-Vasily and it was originaly migrated from https://github.com/makerbase-mks/Software after V4.4 version.

      Using the plugin with Cura, you can:

      • Connect Cura to the MKS Robin WiFi and MKS TFT WiFi;
      • Control your 3D printer wirelessly with Cura;
      • Transfer .gcode files to a printer with 100kbyte/s speed;
      • Get preview on 3D printer srceen when using MKS Robin TFT35 or MKS TFT35 LCD.

      Manually with .curapackage:

      • Download .curapackage file of the selected release;
      • Open Cura on the Prepare tab;
      • Drag and drop .curapackage on this tab.
      • Download or clone this repository;
      • Open Cura configuration folder. It can be found via Help -> Show Configuration Folder inside Cura;
      • Copy folder into [Cura configuration folder]/plugins/ ;
      • Restart Cura.
      • Latest version of MKS WiFi plugin is only available for Cura 5.0 or higher version;
      • For Cura versions 4.7-4.13.1 please manually install version 1.3.2;
      • For Cura versions 4.5-4.6 please manually install version 1.2.2.

      Please create a new GitHub issue and provide all details according to the template.

      Or you can ask a question in our Telegram group.

      To create new translation, or improve existing one, please check automatic translation guide or manual translation guide.

      The development of this plugin can be sponsored via Paypal or Yoomoney

      About

      MKS wifi plugin for Cura with Neptune 3 Pro/Plus/Max thumbnail support

      Источник

Оцените статью
Adblock
detector