Подключение wifi через cmd

Scott Hanselman

How to connect to a Wireless WIFI Network from the Command line in Windows 7

For the humorless amongst you who didn’t find these Updated for 2011 — McDonald’s WiFi Guide with updates for Mac OS X Lion and Windows 7 to be HIGH-LARIOUS, the question was asked, «well, sir, how do you connect to a Wireless WIFI Network from the Command line in Windows 7?«

The answer, is, ahem, thusly:

C:\>netsh wlan connect name=HANSELMAN-N
Connection request was completed successfully.

More Details

What happened there? Well, the command line is netsh wlan and the full one is

netsh wlan connect ssid=YOURSSID name=PROFILENAME

What’s a profile? It’s the only thing required. You can see them with:

Profiles on interface Wireless Network Connection:
. ..snip..
User profiles
————-
All User Profile : Clear Spot b0e
All User Profile : HANSELMAN-N
All User Profile : Quiznos

These are the same ones that you see in the wireless networks dialog.

You can set these up and refer to them by name from the command line, or a batch file, etc. Nice to do for the places you are regularly.

If you have multiple wireless cards (What’s wrong with you!?) then you have to be more specific:

netsh wlan connect ssid=YOURSSID name=PROFILENAME interface=»WIRELESS NETWORK CONNECTION»

And include the interface optionally, for multiple interfaces. Additionally, interesting things can be seen with

This is nice because you can

netsh wlan dump > myconfig.txt

on one machine and then later on another machine

All this command line love will work in most versions of Windows, actually, not just 7 AFAIK. There’s lots of more detail and docs on managing Wireless Profiles on the Web.

About Scott

Scott Hanselman is a former professor, former Chief Architect in finance, now speaker, consultant, father, diabetic, and Microsoft employee. He is a failed stand-up comic, a cornrower, and a book author.

Источник

Командная строка Windows: подключение к беспроводной сети

Мы всегда находимся в поисках гениальных способов произвести впечатление на наших друзей, и недавно мы нашли способ подключиться к нашей беспроводной сети из командной строки, поэтому сегодня мы покажем вам, как это сделать.

Как просматривать и подключаться к беспроводным сетям из командной строки

Для просмотра доступных беспроводных сетей из командной строки требуется только одна команда:

К сожалению, для подключения к сети вам необходим сетевой профиль. Это означает, что вам нужно подключиться к нему хотя бы один раз до этого. Чтобы узнать, какие профили доступны на вашем компьютере, используйте следующую команду:

После того, как вы убедитесь, что у вас есть профиль для сети, к которой вы хотите подключиться, вы можете легко подключиться к ней, используя имя сетевого профиля:

netsh wlan connect name=”w1r3l3$$”

Насколько публикация полезна?

Нажмите на звезду, чтобы оценить!

Средняя оценка / 5. Количество оценок:

Оценок пока нет. Поставьте оценку первым.

Источник

How To Connect To Wi-Fi networks using CMD ( Command Prompt )

Nowadays internet connectivity is everything. For the Internet, we have Wi-Fi connections that we manage and use through the network settings on Windows 7/8.1/10 computers.

You can also connect, manage, and delete your WiFi networks using the command prompt.

In fact, the command prompt offers many more features than the standard network connection settings in Windows 10.

To do this we only require a CMD(Command Prompt) with Administrator privileges and will have to use netsh wlan commands.

How to connect to wifi using cmd with netsh wlan commands-

Before we dive into the guide. You’ll need to open the Command Prompt with administrator rights to perform most of the commands. To do this, use the Windows key + X keyboard shortcut, and select Command Prompt (Admin).

Or search cmd and right click run as administrator

1# View various wireless network profiles saved on your PC

Command > Netsh WLAN show profiles

Every time you connect to a wireless access point, the operating system creates a “wireless network profile”, and it’s stored on your computer, you can view all these profiles using the following command line on the Command Prompt Netsh WLAN show profiles.

Alternatively, you can use the “interface” parameter to show the list of profiles for a particular wireless adapter:

Netsh WLAN show profiles interface=”your WiFi interface name”

2# View WiFi adapter driver information

Command > Netsh WLAN show drivers

When you need to get driver information about your computer’s wireless adapter, you can use the the above command. The result will show the exact drivers being used, the WiFi radios on your PC/laptop alongwith driver version number.

You can further use this command to check your WiFi capabilities. Type in the following command

C:\Netsh WLAN show wirelesscapabilities

The results will show you exactly what your WiFi connection is capable of including WiFi Direct service capabilities.

3# View wireless adapter settings

Command > Netsh WLAN show interfaces

You can see the details of your WiFi interfaces using above command. The results will show you description of the interface, SSID, BSSID, Cipher, authentication type, channel, average receive and transmit rate and radio type.

If you have multiple WiFi connections saved on your PC, the “Show interfaces” command will display the information for all the wireless adapters on your computer. If you only need to see the information for one adapter, you can use the following command:

Netsh WLAN show interface name=”your wifi connection name”

4# Recover your WiFi password from any of the WiFi connection profiles saved on your PC

Command > Netsh WLAN show profile name=”your WiFi connection name” key=clear

If you lost and cannot remember your network security key to connect another device to a particular Wi-Fi access point, you can use the above command to view your WiFi password. You can also use this command to see the data limits if you have set them.

5# Connecting to a WiFi network using command prompt

Command > netsh wlan set hostednetwork mode=allow ssid=”your WiFi connection name” key=”your WiFi connection password”

You can use the above command to sign into your WiFi network. The above command is particularly useful if your WiFi settings in Windows 10 is not visible/cannot be connected due to some reasons. The additional commands are C:\netsh wlan start hostednet and C:\netsh wlan stop hostednetwork These two commands will start and stop your WiFi hotspot connection.

6# Stop your PC connecting automatically to a wireless network out of range

Command > Netsh WLAN set profileparameter name=”your WiFi connection name” connectionmode=manual

Normally, you would have configured your Windows 10 PC to connect to different WiFi networks automatically. While this is the best way to connect, sometimes notice that your laptop connects automatically to a WiFi connection that has zero or poor connectivity instead of an available full network WiFi connection. In such a case you can use the above command to prevent your computer from connecting to different networks automatically. If you want to move again to the automatic mode use the following command C:\Netsh WLAN set profileparameter name=” your WiFi connection name” connectionmode=auto

7# Delete wireless network profile stored on your PC

Command > Netsh WLAN delete profile name=”the WiFi connection you want to delete”

When you no longer need to connect to a particular wireless network, the access point is no longer available, or you need to reset the network profile settings, you can also use Netsh WLAN to delete any profile stored on your computer using the above command. If you can’t remember the name of the network profile, you can use the C:\Netsh WLAN show profiles command to list all the available profiles and select the one you want to delete.

8# Export and import wireless network profiles

Command > Netsh WLAN export profile key=clear folder=”the folder you want to save this report”

Sometimes you need to export and import wireless profiles. The above command exports all your wireless network profiles available on your PC. If you want to export a specific WiFi connection profile to a specific location, use this command > C:\Netsh WLAN export profile name=”your WiFi connection name” key=clear folder=”the folder you want to save this report”

9# Generate a complete report of the wireless adapters on your PC/laptop

Command > Netsh WLAN show WLANreport

Trouble shooting WiFi connection problems is very difficult as Internet has lots of conflicting tutorials and troubleshooting guide. Also you should know the exact problem you are facing while connecting to WiFi.

Using the above command will generate a full detailed WiFi networks report to the following location > C:\ProgramData\Microsoft\Windows\WLANReport\ WLAN-report-latest.html.

Once the WLAN report has been created, copy and paste the path into your web browser’s address bar to open the report.

You can use this report to troubleshoot the problems, ask help on tech forums. The WLAN reports contain a graph with details of the connectivity status, including information, such as when the connection started, when it got disconnected, errors, and more.

The report also summarizes network adapters information configured on your system, session success/failures, disconnect reasons, and a lot more. It’s a very detailed report that can help you to ping point many Wi-Fi connectivity issues.

So this was how to connect to wifi using cmd (command prompt) with netsh wlan commands

Источник

How to connect to a WiFi using CMD only?

How to connect to a new WiFi by enter a password using CMD? For my school project I have decided to make a WiFi_manager program using cmd. I know to display all WiFi networks (in cmd):

Now lets say I want to connect to a WiFi network that I never connected before. And that WiFi is not yet added to profiles. But I know the password of the WiFi. 1) What will be the command line for that. Given the information of WiFi network below:

SSID 3 : Ismail Network type : Infrastructure Authentication : WPA-Personal Encryption : CCMP and password is "Thanks_bro". 

3 Answers 3

So you already know netsh wlan

If you enter it you get a list of possible commands. One is add .

If you enter netsh wlan add you get another list of possible subcommands. One is profile .

If you enter netsh wlan add profile you get a detailed explanation about all its possible parameters. One needed parameter is a XML file containing the profile informations.

So how to get such an XML file? Go back to netsh wlan and study the keywords. There is export .

If you enter netsh wlan export you get another list of possible subcommands. One is profile . It creates an XML in your local directory containing the needed informations for your current WiFi connection.

If you like to get the password in clear text, you’ll also have to add the parameter key=clear . Make the whole command becoming

netsh wlan export profile key=clear 

Here is an example which already contains the needed placeholders

    ESS auto   WPA2PSK AES false  passPhrase false   false   

Simply replace the keywords (occurs two times) and with the desired values and import that file by calling

netsh wlan add profile filename="myProfile.xml" 

Источник

Как включить WIFI с помощью cmd?

Добрый день,
как с помощью cmd (например netsh) включить переключатель Wi-Fi в windows 10?

Просьба не отвечать, если не протестировали сами на своем пк. Так как уже многое пробовал.
Заранее благордарю.

Узнаем список доступных интерфейсов сети
netsh wlan show interface
Выводим список Wifi сетей
netsh wlan show networks
Для подключения к WiFi сети служит команда
netsh wlan connect name=ИмяПрофиляСети

Можно указать конкретный интерфейс, при помощи которого выполнять подключение. Синтаксис таков: netsh wlan connect name=ИмяПрофиляСети interface=ИмяИнтерфейса
У меня бы это выглядело так:
netsh wlan connect name=TRENDnet interface=»Wireless Network Connection 3″

Отключение от WiFi сети Чтобы отключиться от WiFi сети, необходимо выполнить следующую команду
netsh wlan disconnect
Или указать конкретный интерфейс
netsh wlan disconnect interface=ИмяИнтерфейса
При помощи netsh можно просмотреть все доступные профили:
netsh wlan show profile
И, собственно, подключиться к сети с выбранным профилем:
netsh wlan connect ssid=ИмяСети name=ИмяПрофиляСети

Источник