Polar cadence sensor bluetooth smart

Troubleshooting Cadence Sensor Bluetooth® Smart

There are two ways to pair a cadence sensor with your V800:

1. Press START in time view to enter pre-training mode.
2. V800 starts searching for your cadence sensor. Rotate the crank a few times to activate the sensor. The flashing red light in the sensor indicates that the sensor is activated.
3. The device ID Pair Polar CAD xxxxxxxxis displayed. Choose Yes.
4. Pairing completedis displayed when the pairing is complete.
5. Sensor linked to:is displayed. Choose Bike 1or Bike 2. Confirm with START.

1. Go to General Settings > Pair and sync > Pair new deviceand press START.
2. V800 starts searching for the cadence sensor. Rotate the crank a few times to activate the sensor. The flashing red light in the sensor indicates that the sensor is activated.
3. Once the cadence sensor is found, Polar CAD xxxxxxxxis displayed.
4. Press START, Pairingis displayed.
5. Pairing completedis displayed when the pairing is complete.
6. Sensor linked to:is displayed. Choose Bike 1or Bike 2. Confirm with START.

Does the light flash in the sensor when the cadence magnet passes it?

The light indicates that the cadence sensor is positioned correctly and that the sensor is alive. For more on positioning, see the cadence sensor user manual or installation video.

Источник

Polar Cadence Sensor Bluetooth® Smart

The most practical way of measuring your cycling session is with our advanced wireless cadence sensor. It measures your real-time, average and maximum cycling cadence as revolutions per minute so you can compare the technique of your ride against previous rides.

• Improves your cycling technique and identifies your optimal cadence
• Interference-free cadence data lets you evaluate your individual performance
• Designed to be aerodynamic and light

Pair Cadence Sensor with M460

Make sure the cadence sensor has been correctly installed. For more information on installing the cadence sensor refer to the user manual of the cadence sensor.

There are two ways to pair a cadence sensor with your M460:

1. Go to General Settings > Pair and sync > Pair other device and press START .
2. M460 starts searching for the cadence sensor. Rotate the crank a few times to activate the sensor. The flashing red light on the sensor indicates that the sensor is activated.
3. Once the cadence sensor is found, Polar CAD xxxxxxxx is displayed.
4. Press START , Pairing is displayed.
5. Pairing completed is displayed when the pairing is ready.
6. Sensor linked to: is displayed. Choose Bike 1 , Bike 2 or Bike 3 . Confirm with START . The first cycling sensor you pair will automatically be linked to Bike 1 .

1. Press START in time view to enter pre-training mode.
2. M460 starts searching for your cadence sensor. Rotate the crank a few times to activate the sensor. The flashing red light on the sensor indicates that the sensor is activated.
3. The device ID Pair Polar CAD xxxxxxxx is displayed. Choose Yes .
4. Pairing completed is displayed when the pairing is ready.
5. Sensor linked to: is displayed. Choose Bike 1 , Bike 2 or Bike 3 . Confirm with START .

Источник

Polar Cadence Sensor Bluetooth® Smart

The most practical way of measuring your cycling session is with our advanced wireless cadence sensor. It measures your real-time, average and maximum cycling cadence as revolutions per minute so you can compare the technique of your ride against previous rides.

• Improves your cycling technique and identifies your optimal cadence
• Interference-free cadence data lets you evaluate your individual performance
• Designed to be aerodynamic and light

Pair Cadence sensor with V650

Make sure the cadence sensor has been correctly installed. For more information on installing the cadence sensor refer to the user manual of the cadence sensor.

1. Go to General Settings > Pairing > Pair new device . The V650 should be less than three meters from the sensor you want to pair. It’s close enough when it’s mounted on the handlebar.

2. Activate the sensor you want to pair. Rotate the crank a few times to activate the sensor. The flashing red light in the sensor indicates that you’ve activated the sensor.

Do the pairing within 30 seconds of the sensor activation.

3. V650 lists the devices it finds. The device closest to V650 is at the top of the list. Tap the device you want to pair.

4. Pairing succeeded tells you that the pairing is complete.

5. Link the sensor to Bike 1 , Bike 2 , Bike 3 or Bike 4 . You can change the bike later in Paired devices .

When you select a bike for a ride, your V650 automatically starts searching for the sensors you’ve linked to the bike. V650 is ready once the green circle around the sensor indicator is static.

Источник

Polar Cadence Sensor Bluetooth® Smart

The most practical way of measuring your cycling session is with our advanced wireless cadence sensor. It measures your real-time, average and maximum cycling cadence as revolutions per minute so you can compare the technique of your ride against previous rides.

• Improves your cycling technique and identifies your optimal cadence
• Interference-free cadence data lets you evaluate your individual performance
• Designed to be aerodynamic and light

Pair Cadence sensor with V650

Make sure the cadence sensor has been correctly installed. For more information on installing the cadence sensor refer to the user manual of the cadence sensor.

1. Go to General Settings > Pairing > Pair new device . The V650 should be less than three meters from the sensor you want to pair. It’s close enough when it’s mounted on the handlebar.

2. Activate the sensor you want to pair. Rotate the crank a few times to activate the sensor. The flashing red light in the sensor indicates that you’ve activated the sensor.

Do the pairing within 30 seconds of the sensor activation.

3. V650 lists the devices it finds. The device closest to V650 is at the top of the list. Tap the device you want to pair.

4. Pairing succeeded tells you that the pairing is complete.

5. Link the sensor to Bike 1 , Bike 2 , Bike 3 or Bike 4 . You can change the bike later in Paired devices .

When you select a bike for a ride, your V650 automatically starts searching for the sensors you’ve linked to the bike. V650 is ready once the green circle around the sensor indicator is static.

Источник

Polar Cadence Sensor Bluetooth® Smart

The most practical way of measuring your cycling session is with our advanced wireless cadence sensor. It measures your real-time, average and maximum cycling cadence as revolutions per minute so you can compare the technique of your ride against previous rides.

• Improves your cycling technique and identifies your optimal cadence
• Interference-free cadence data lets you evaluate your individual performance
• Designed to be aerodynamic and light

Pair Cadence Sensor with M450

Make sure the cadence sensor has been correctly installed. For more information on installing the cadence sensor refer to the user manual of the cadence sensor.

There are two ways to pair a cadence sensor with your M450:

1. Go to General Settings > Pair and sync > Pair other device and press START .
2. M450 starts searching for the cadence sensor. Rotate the crank a few times to activate the sensor. The flashing red light on the sensor indicates that the sensor is activated.
3. Once the cadence sensor is found, Polar CAD xxxxxxxx is displayed.
4. Press START , Pairing is displayed.
5. Pairing completed is displayed when the pairing is ready.
6. Sensor linked to: is displayed. Choose Bike 1 , Bike 2 or Bike 3 . Confirm with START . The first cycling sensor you pair will automatically be linked to Bike 1 .

1. Press START in time view to enter pre-training mode.
2. M450 starts searching for your cadence sensor. Rotate the crank a few times to activate the sensor. The flashing red light on the sensor indicates that the sensor is activated.
3. The device ID Pair Polar CAD xxxxxxxx is displayed. Choose Yes .
4. Pairing completed is displayed when the pairing is ready.
5. Sensor linked to: is displayed. Choose Bike 1 , Bike 2 or Bike 3 . Confirm with START .

Источник