device descriptor read/64, error -110
I have a storage server running openmediavault which is based on debian. The OS is in a USB 3.0 Stick pluged directly on the motherboard (no USB-Hub or sth). The system was running fine for about 3 Months and 2 days ago I got this errors:
usb 1-3: device descriptor read/64, error -110 usb 1-3: device not accepting address 33, error -110 usb 1-3: device not accepting address 34, error -110 hub 1-0:1.0: unable to enumerate USB device on port 3 When I restart the server, everything is fine again. The next day I face the same error. What can I do to fix this. I dont want to loose 3TB of data.
5 Answers 5
USB error -110 means «Timeout expired before the transfer completed», which could be caused by anything. Most commonly, it’s because power was exceeded; the host could not provide enough electric power for the pendrive to operate. Because it has not enough power also the USB stick cannot provide the device descriptor to the host, as a result it cannot be identified and so on. Maybe your motherboard it’s overloaded with devices that consume all the available power.
So far it worked well, and the only things I have pluged into the MB are 3 SATA-HDDs and the CPU-Fan. Nothing that could drain so much power.
Hmmm, it depends. you have study the specs of the motherboard, the hdd and the CPU fan (even I don’t think that fan drains a lot of power).
Off-topic. I once diagnosed a similar issue, an industrial computer board (which actually it was a former laptop line adjusted by Fujitsu-Siemens for industrial/medical use) and a FireWire industrial camera. This camera was reseting randomly. In fact all the peripherals were sharing the same power source, and in some situations the board was cutting the power to the camera, in order to suply it the more higher priority devices.
This answer does not make sense to me. The failed device is an HP LaserJet printer and so it have its own power supply.
The problem was a USB 3.0 Stick that needed more current than usual for a USB 2.0 device. This lead to the errors. I replaced the stick and in addition to that I installed the latest BIOS-Drivers. No more problems!
Just to add another data point: I was running into «error -110» messages for my Inateck dual bay USB 3.0 to SATA device (amazon link). This fixed it for me:
- shutdown -h now (turn off the computer)
- Unplug USB device from computer.
- Unplug power cord to back of the computer.
- Unplug power to Inateck — pull wall wart plug from wall socket.
- Noticed there was a green glowing LED on the Inateck wall wart; waited for that to go dark.
- Waited ~3min total.
- Plugged everything back in and booted up.
Note: Previously I tried just unplugging the computer and letting it sit for a while; that didn’t work. I had to unplug the USB from the computer and the usb device power adapter from the wall.
Must be something with USB power provisioning/negotiation?
Thanks for that information. I have had that glowing LED thing with some NIVIDIA drivers on Linux, so I knew what you meant. In my case I had plugged-in a powered USB hub before the power was connected. I am surprised though that the Hub drew power before anything was connected. Based on the comments here, seems the USB port status is locked at at 110 until whatever hot-start on-board memory loses power long enough to forget. Like I said, seen that already with the graphics driver. It is a relief to be back and running — I couldn’t see what might have gone awry.
I had the same problem, but I only needed to unplug and replug the power cable (while the PC is runnning). For some reason, simply rebooting the PC didn’t help.
unixforum.org
[Решено]usb 1-1: device descriptor read/64, error -110 (В чем проблема?)
[Решено]usb 1-1: device descriptor read/64, error -110
Сообщение held » 08.06.2009 15:22
Перестали определятся USB устройства. Команда lsusb долго весит в конце выдает список usb без тех к которым подключен сканер и принтер. При загрузки и выключении выходит ошибка
usb 1-4: device descriptor read/64, error -110
usb 1-4: device descriptor read/64, error -110
usb 1-4: device descriptor read/8, error -110
usb 1-4: device descriptor read/8, error -110
в kern.log постоянно сыпится
Jun 8 16:23:40 as-desktop kernel: [ 1613.609046] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:41 as-desktop kernel: [ 1613.856045] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:41 as-desktop kernel: [ 1614.105046] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:41 as-desktop kernel: [ 1614.353071] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:41 as-desktop kernel: [ 1614.600134] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:42 as-desktop kernel: [ 1614.849041] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:42 as-desktop kernel: [ 1615.829057] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:43 as-desktop kernel: [ 1616.077062] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:43 as-desktop kernel: [ 1616.315292] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:43 as-desktop kernel: [ 1616.561048] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:43 as-desktop kernel: [ 1616.808039] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:44 as-desktop kernel: [ 1617.057038] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:44 as-desktop kernel: [ 1617.304317] hub 4-0:1.0: unable to enumerate USB device on port 1 Jun 8 16:23:44 as-desktop kernel: [ 1617.553041] hub 4-0:1.0: unable to enumerate USB device on port 1В журнале в messages временами добовляется
Jun 8 16:13:47 as-desktop kernel: [ 1020.672034] usb 2-2: new full speed USB device using ohci_hcd and address 8 Jun 8 16:14:18 as-desktop kernel: [ 1051.408037] usb 2-2: new full speed USB device using ohci_hcd and address 9 Jun 8 16:14:45 as-desktop kernel: [ 1078.296026] usb 1-4: new high speed USB device using ehci_hcd and address 7 Jun 8 16:14:55 as-desktop kernel: [ 1088.652027] usb 1-4: new high speed USB device using ehci_hcd and address 8 Jun 8 16:15:06 as-desktop kernel: [ 1099.008027] usb 1-4: new high speed USB device using ehci_hcd and address 9 Jun 8 16:15:36 as-desktop kernel: [ 1129.552044] usb 1-4: new high speed USB device using ehci_hcd and address 10 Jun 8 16:16:07 as-desktop kernel: [ 1160.808049] usb 2-2: new full speed USB device using ohci_hcd and address 10 Jun 8 16:16:18 as-desktop kernel: [ 1171.232027] usb 2-2: new full speed USB device using ohci_hcd and address 11 Jun 8 16:16:28 as-desktop kernel: [ 1181.652026] usb 2-2: new full speed USB device using ohci_hcd and address 12 Jun 8 16:16:59 as-desktop kernel: [ 1212.388022] usb 2-2: new full speed USB device using ohci_hcd and address 13 Jun 8 16:17:34 as-desktop kernel: [ 1247.080031] usb 2-2: new full speed USB device using ohci_hcd and address 14 Jun 8 16:17:44 as-desktop kernel: [ 1257.500032] usb 2-2: new full speed USB device using ohci_hcd and address 15 Jun 8 16:17:55 as-desktop kernel: [ 1267.920033] usb 2-2: new full speed USB device using ohci_hcd and address 16 Jun 8 16:18:25 as-desktop kernel: [ 1298.664739] usb 2-2: new full speed USB device using ohci_hcd and address 17В чем проблема, подскажите, пожалуйста.
Ubuntu не может считать мой USB: “чтение/64 дескриптора устройства, ошибка-110”
У меня есть флеш-накопитель на 16 ГБ. Я запускаю Ubuntu 14.04. Я не могу открыть свой флеш-накопитель, и я не вижу его в GParted. После выполнения tail -f /var/log/syslog . После вставки моей флэш-памяти:
USB disconnect, device number 10 Jul 3 16:39:55 rihanna-VGN-Z56GG-B kernel: [ 3309.712166] usb 2-3: new high-speed USB device number 11 using ehci-pci Jul 3 16:39:55 rihanna-VGN-Z56GG-B kernel: [ 3309.846591] usb 2-3: New USB device found, idVendor=090c, idProduct=1000 Jul 3 16:39:55 rihanna-VGN-Z56GG-B kernel: [ 3309.846601] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jul 3 16:39:55 rihanna-VGN-Z56GG-B kernel: [ 3309.846609] usb 2-3: Product: Silicon-Power Jul 3 16:39:55 rihanna-VGN-Z56GG-B kernel: [ 3309.846615] usb 2-3: Manufacturer: UFD 2.0 Jul 3 16:39:55 rihanna-VGN-Z56GG-B kernel: [ 3309.846622] usb 2-3: SerialNumber: 1401208423400131 Jul 3 16:39:55 rihanna-VGN-Z56GG-B kernel: [ 3309.847176] usb-storage 2-3:1.0: USB Mass Storage device detected Jul 3 16:39:55 rihanna-VGN-Z56GG-B kernel: [ 3309.847309] scsi12 : usb-storage 2-3:1.0 Jul 3 16:39:55 rihanna-VGN-Z56GG-B mtp-probe: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-3" Jul 3 16:39:55 rihanna-VGN-Z56GG-B mtp-probe: bus: 2, device: 11 was not an MTP device Jul 3 16:40:17 rihanna-VGN-Z56GG-B kernel: [ 3332.176107] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:40:33 rihanna-VGN-Z56GG-B kernel: [ 3347.288080] usb 2-3: device descriptor read/64, error -110 Jul 3 16:40:48 rihanna-VGN-Z56GG-B kernel: [ 3362.504081] usb 2-3: device descriptor read/64, error -110 Jul 3 16:40:48 rihanna-VGN-Z56GG-B kernel: [ 3362.720076] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:40:52 rihanna-VGN-Z56GG-B kernel: [ 3366.812110] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:41:07 rihanna-VGN-Z56GG-B kernel: [ 3381.924082] usb 2-3: device descriptor read/64, error -110 Jul 3 16:41:23 rihanna-VGN-Z56GG-B kernel: [ 3397.356093] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:41:38 rihanna-VGN-Z56GG-B kernel: [ 3412.468057] usb 2-3: device descriptor read/64, error -110 Jul 3 16:41:54 rihanna-VGN-Z56GG-B kernel: [ 3428.664065] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:42:09 rihanna-VGN-Z56GG-B kernel: [ 3443.776100] usb 2-3: device descriptor read/64, error -110 Jul 3 16:42:24 rihanna-VGN-Z56GG-B kernel: [ 3458.992085] usb 2-3: device descriptor read/64, error -110 Jul 3 16:42:25 rihanna-VGN-Z56GG-B kernel: [ 3459.208063] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:42:40 rihanna-VGN-Z56GG-B kernel: [ 3474.320039] usb 2-3: device descriptor read/64, error -110 Jul 3 16:42:50 rihanna-VGN-Z56GG-B kernel: [ 3484.516109] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:42:50 rihanna-VGN-Z56GG-B kernel: [ 3484.768108] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:43:05 rihanna-VGN-Z56GG-B kernel: [ 3499.880081] usb 2-3: device descriptor read/64, error -110 Jul 3 16:43:20 rihanna-VGN-Z56GG-B kernel: [ 3515.096081] usb 2-3: device descriptor read/64, error -110 Jul 3 16:43:21 rihanna-VGN-Z56GG-B kernel: [ 3515.312048] usb 2-3: reset high-speed USB device number 11 using ehci-pci Jul 3 16:43:36 rihanna-VGN-Z56GG-B kernel: [ 3530.424032] usb 2-3: device descriptor read/64, error -110 Jul 3 16:43:46 rihanna-VGN-Z56GG-B kernel: [ 3540.505230] scsi 12:0:0:0: Device offlined - not ready after error recovery 4 ответа
Таким образом, ошибка device descriptor read/64, error -110 , который является, в основном имеет некоторое отношение к питанию. Ваш ноутбук/рабочий стол не смог подать достаточно питания к USB. Решение, которое работало на многих, закрывает систему, отключите зарядное устройство и USB в течение 5 минут, зарядное устройство переразъема и USB, перезапустите систему.
device descriptor read/64, error -110 средства, что источник питания USB-порта был превышен. Попробуйте еще раз использовать все другие сокеты.
Отключение всего работало на меня. См. , мой stackoverflow ответ на потоке, 1) упомянутом Ron, копировал/вставлял ниже:
я сталкивался «с ошибкой-110» сообщений для моего Inateck двойной отсек USB 3.0 к устройству SATA ( ссылка амазонки ). Это зафиксировало его для меня:
- shutdown -h now (выключают компьютер)
- Отключают USB-устройство от компьютера.
- Отключают шнур питания к задней части компьютера.
- Отключают питание к Inateck — настенный разъем бородавки получения по запросу от стенной розетки .
- Замеченный было зеленое свечение, Вовлек стенную бородавку Inateck; ожидавший для этого для движения темный.
- Ожидал ~3min общее количество.
- Включенный все въезжает задним ходом и загруженный.
Работавший любил очарование.
Примечание : Ранее я пытался просто отключить компьютер и позволить ему находиться некоторое время; это не работало. Я должен был отключить USB от компьютера и адаптера питания USB-устройства от стены.
Должно быть что-то с настройкой/согласованием питания USB?