Raspberry pi wifi address

How to Setup Raspberry Pi Wifi With a Static IP

In this modern world, everything that we do requires an internet connection. Whether it is reading an article or looking up a tutorial, everything demands wifi.

Thus, if you are a Raspberry pi user and want to know more about your static IP address so that you can access wifi, this article is for you!

In this article, we will talk about everything you need to raspberry pi. In addition, we will also highlight the importance of knowing your raspberry pi static IP address and how you can set it up!

Curious to know more? Read on.

What is a Static IP Address?

In simple terms, when you have your raspberry pi static IP address, it does not change. Therefore, if you want to access your computer for a long time, your Raspberry Pi will always need a static IP address.

For those who are new to the tech world, a static IP address refers to your Raspberry’s private IP address. It is often placed by a computer that is within your network. Other than that, it is also located by a public IP address of your network through which your Raspberry Pi is accessible via the internet.

Why You Need to Set a Static IP

If you plan to use Raspberry Pi as your server, configuring a static IP is necessary. Here are some reasons:

Accessibility

As our network SSID usually needs access, this makes having a consistent IP address ideal.

Easy Configuration

The main reason it’s so popular is that it is straightforward to set up and manage compared to DNS networks.

VPN Compatibility

Another reason why using raspbian static IP is ideal is because it makes working remotely a lot easier by using a Virtual Private Network or any other remote network.

Hosting Server

If you host an email server or web server, having a static address will make it a lot easier for people to find you. This means you will have more potential clients on your website.

How to Give Raspberry Pi Its Personalized Static IP Address

If you want to set a raspberry pi static IP, you will need to open your Terminal or do it via SSH. After that, you should run the following command on text editor:

Then, scroll down the bottom by holding down on your keyboard. After that, you can copy and paste the following command. Just change the details of numbers that are bolded to any IP that you wish to have:

• interface eth0
• static ip_address=192.168.0.2/24
• static routers=192.168.0.1
• static domain_name_servers=192.168.0.1
• interface wlan0
• static ip_address=192.168.0.2/24
• static routers=192.168.0.1
• static domain_name_servers=192.168.0.1

If you live at your house, the part of routers= and domain name servers will both be equal to the IP addresses of your raspberry pi router. Otherwise, the name server will be your DNS records’ IP, and your router address will be the IP of the gateway.

Now press Ctrl X and Y on your keyboard to save changes. Afterward, reboot Raspberry Pi, and your Static IP address will be ready!

If you want to check your raspberry pi static IP, do so by opening Terminal or SSH and running the “ifconfig” file.

Types of IP Addresses

There are two types of IP address that work for all versions of Raspberry pi, such as raspberry pi 3 or 2. These are:

• The private IP address within your LAN
• Public IP address, which is basically of your ethernet or wifi connection.

For Static IP on LAN Connection

First, you need to find settings for your local network. You can easily do that with Raspberry Pi while using the DHCP server. However, the commands for them might differ on other systems.

Start by running up -4 addr show | grep global. This will give you the following IP addresses:

• inet 10.1.1.30/24 brd 10.1.1.255 scope global eth0
• inet 10.1.1.31/24 brd 10.1.1.255 scope global wlan0

Here, the first result is your Pi’s IP address on your network, whereas the part which comes after the slash is your network’s size.

On the other hand, the second address is the broadcast address of your network.

Then to find the IP address of your gateway or router, run the following

• IP route | grep default | awk ‘’
• 10.1.1.1

Lastly, write down the DNS server IP address that is often similar to your gateway.

After that, run the following:

When that’s done, choose any method from the following, which is quite common for Raspbian.

a) The dhcpcd.conf File Method

Let /etc/network/interfaces be at the default settings. It would help if you changed/etc/dhcpcd.conf as:

(This is one of the examples that configure your raspberry pi static address, DNS, and routes.)

• interface eth0
• static ip_address=10.1.1.30/24
• static routers=10.1.1.1
• static domain_name_servers=10.1.1.1

Here’s another example for interface wlan0

• interface wlan0
• static ip_address=10.1.1.31/24
• static routers=10.1.1.1
• static domain_name_servers=10.1.1.1

b) Network Interfaces Method

We do not recommend using this method because it will only work if you have disabled the DHCP client daemon.

You can configure your raspberry pi static IP address by running the following:

• auto eth0
• iface eth0 inet static
• address 10.1.1.30
• netmask 255.255.255.0
• gateway 10.1.1.1
• allow-hotplug wlan0
• iface wlan0 inet static
• address 10.1.1.31
• netmask 255.255.255.0
• gateway 10.1.1.1
• WPA-conf /etc/wpa_supplicant/wpa_supplicant.conf

You can also try to specify your raspberry pi DNS server name. However, it is not necessary. You can either setup eth0, or wlan0.

After that, you need to disable your DHCP client daemon by switching to Debian networking by running the following command sudo:

sudo systemctl disable dhcpcd

sudo systemctl enable networking

Then lastly, reboot to make the changes effective by typing the following:

Configure a Static Ip Addresses on Ethernet

If you want to set a static IP for your raspberry pi 3 or other versions where you use ethernet or wifi, try running the following command:

Then write down the following lines at the top of your code:

• interface eth0
• static ip_address=192.168.1.XX/24
• After that, write static routers=192.168.1.1 on the next line
• Then, static domain_name_servers=192.168.1.1 on the next one.
• Lastly, type sudo reboot, and run the program.

Remember: you need to do this for all the new Jessie updates.

However, leave the lines /etc/network/interfaces alone. Now, to check if the assigned code worked, open any browser and enter your router address.

Once it opens up, double-check if your Raspberry Pi comes up as ‘Static.’ If it does, this means your configuration setup is working.

Conclusion

There are numerous reasons why you should configure a static IP address. However, many get overwhelmed after readings its steps of configuration. In this article, we have shared some easy steps that you can follow along easily to solve that issue.

Hedayat S

Hedayat is the new Editor-in-Chief of Rottenwifi and has been writing about computer networking since 2012. Hedayat’s strong background in computer science helped him cement his position in the ever-expanding tech blogging world. As a network engineer, systems administrator, and systems analyst during his decade-long career in Information Technology, he has a passion for the internet & technology in his DNA.

Blog.rottenwifi.com is a participant in the Amazon Services LLC Associates Program which means we may get paid commissions on editorially chosen products purchased through our links to retailer sites. All names, logos, brands, and images are trademarks or copyrighted materials of their respective owners. Amazon and the Amazon logo are trademarks of Amazon.com, Inc., or its affiliates.

Источник