Realtek 8111 linux driver

Step-by-step – Realtek RTL8111x Ubuntu 20.04 Driver Installation

GNU/Linux Ubuntu 20.04 Realtek RTL8111x Setup Guide

Hi! The linked Tutorial shows you Step-by-Step How to Install Realtek RTL8111x Wireless Driver for Ubuntu 20.04 Focal LTS GNU/Linux.

And the r8168-dkms Ubuntu 20.04 Package contains the Binary Firmware for Realtek Ethernet, Wifi and Bluetooth Adapters Supported by Various Drivers.

Especially relevant: this Realtek RTL8111x Driver Ubuntu 20.04 Dkms Setup should be working also after an Apt Kernel Upgrade also because is part of the Default Repo.

This Realtek Driver Ubuntu Setup should support All the following PCI Express 10/100/1000M Gigabit Ethernet Adapters:

• RTL8125/8125B(S)
• RTL8168B/8111B
• RTL8168C/8111C
• RTL8168CP/8111CP
• RTL8168D/8111D
• RTL8168DP/8111DP
• RTL8168E/8111E
• RTL8111G/8111H
• RTL8411/8411B

And again also the PCI Express 10/100M Fast Ethernet Interfaces:

• RTL8101E
• RTL8102E
• RTL8103E
• RTL8105E
• RTL8106E
• RTL8107E
• RTL8401
• RTL8402

Please be aware of how this Driver is Not supporting all the Linux Kernels range, so in case of issue consult the available Online Documentation.

So as a possible Solution, then you may also see: How to Install New Kernel Guide.

Again, in case of Issue for preventing any possible Driver loading Interference you should also take into account: How to Blacklist Kernel Modules.

GNU/Linux Ubuntu 20.04 Realtek rtl8111X Driver Installation

So Now I’m truly Happy if this Guide could Help you to Install Realtek RTL8111x Driver on Ubuntu 20.04!

Источник

Saved searches

Use saved searches to filter your results more quickly

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session. You switched accounts on another tab or window. Reload to refresh your session.

Linux driver for Realtek RTL8111/8168/8411 PCIe GBE NIC

airium/Realtek-PCIe-GBE-NIC-Driver

This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

Sign In Required

Please sign in to use Codespaces.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

Realtek PCIe GBE NIC Driver

Applicable for RTL8111/8168/8411 PCIe GBE NIC.

Using the official driver will resolve sending rate being capped at 4MB/s per tcp connection under tcp-bbr, typically when you’re using the default r8169 nic driver on RTL8168 device. Newer distros like Ubuntu 18.04.3 with a mainline Linux 5.3 should not have the problem any more. You should try this driver only if you did notice the sending rate degradation.

Install dependences (assume sudo su )

apt update && apt install build-essential libelf-dev linux-headers-$(uname -r)

git clone https://github.com/airium/Realtek-PCIe-GBE-NIC-Driver.git cd Realtek-PCIe-GBE-NIC-Driver/r8168-8.047.05 sh autorun.sh # this script will break the network temporarily # on Ubuntu 16/18, your ssh session will be automatically resumed in ~1 minute # on Debian 8/9, you might have to reboot manually after ~5 minutes

for i in $(ls /sys/class/net); do echo $i '=====================' ethtool -i $i done

enp4s0 ===================== driver: r8168 version: 8.047.05-NAPI firmware-version: expansion-rom-version: bus-info: 0000:04:00.0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: yes supports-priv-flags: no 

Compared with the reference, this guide complements necessary dependencies, and removes the blacklist operation (it seems the Realtek driver will do it for you).

About

Linux driver for Realtek RTL8111/8168/8411 PCIe GBE NIC

Источник

Saved searches

Use saved searches to filter your results more quickly

You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session. You switched accounts on another tab or window. Reload to refresh your session.

Linux device driver for Realtek Ethernet controllers (unofficial mirror)

mtorromeo/r8168

This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

Sign In Required

Please sign in to use Codespaces.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching GitHub Desktop

If nothing happens, download GitHub Desktop and try again.

Launching Xcode

If nothing happens, download Xcode and try again.

Launching Visual Studio Code

Your codespace will open once ready.

There was a problem preparing your codespace, please try again.

Latest commit

Git stats

Files

Failed to load latest commit information.

README

 This is the Linux device driver released for RealTek RTL8168B/8111B, RTL8168C/8111C, RTL8168CP/8111CP, RTL8168D/8111D, RTL8168DP/8111DP, and RTL8168E/8111E Gigabit Ethernet controllers with PCI-Express interface. - Kernel source tree (supported Linux kernel 2.6.x and 2.4.x) - For linux kernel 2.4.x, this driver supports 2.4.20 and latter. - Compiler/binutils for kernel compilation Unpack the tarball : # tar vjxf r8168-8.aaa.bb.tar.bz2 Change to the directory: # cd r8168-8.aaa.bb If you are running the target kernel, then you should be able to do : # ./autorun.sh (as root or with sudo) You can check whether the driver is loaded by using following commands. # lsmod | grep r8168 # ifconfig -a If there is a device name, ethX, shown on the monitor, the linux driver is loaded. Then, you can use the following command to activate the ethX. # ifconfig ethX up ,where X=0,1,2. 1. Set manually a. Set the IP address of your machine. # ifconfig ethX "the IP address of your machine" b. Set the IP address of DNS. Insert the following configuration in /etc/resolv.conf. nameserver "the IP address of DNS" c. Set the IP address of gateway. # route add default gw "the IP address of gateway" 2. Set by doing configurations in /etc/sysconfig/network-scripts /ifcfg-ethX for Redhat and Fedora, or /etc/sysconfig/network /ifcfg-ethX for SuSE. There are two examples to set network configurations. a. Fixed IP address: DEVICE=eth0 BOOTPROTO=static ONBOOT=yes TYPE=ethernet NETMASK=255.255.255.0 IPADDR=192.168.1.1 GATEWAY=192.168.1.254 BROADCAST=192.168.1.255 b. DHCP: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes There are two ways to modify the MAC address of the NIC. 1. Use ifconfig: # ifconfig ethX hw ether YY:YY:YY:YY:YY:YY ,where X is the device number assigned by Linux kernel, and YY:YY:YY:YY:YY:YY is the MAC address assigned by the user. 2. Use ip: # ip link set ethX address YY:YY:YY:YY:YY:YY ,where X is the device number assigned by Linux kernel, and YY:YY:YY:YY:YY:YY is the MAC address assigned by the user. 1. Force the link status when insert the driver. If the user is in the path ~/r8168, the link status can be forced to one of the 5 modes as following command. # insmod ./src/r8168.ko speed=SPEED_MODE duplex=DUPLEX_MODE autoneg=NWAY_OPTION ,where SPEED_MODE = 1000 for 1000Mbps = 100 for 100Mbps = 10 for 10Mbps DUPLEX_MODE = 0 for half-duplex = 1 for full-duplex NWAY_OPTION = 0 for auto-negotiation off (true force) = 1 for auto-negotiation on (nway force) For example: # insmod ./src/r8168.ko speed=100 duplex=0 autoneg=1 will force PHY to operate in 100Mpbs Half-duplex(nway force). 2. Force the link status by using ethtool. a. Insert the driver first. b. Make sure that ethtool exists in /sbin. c. Force the link status as the following command. # ethtool -s ethX speed SPEED_MODE duplex DUPLEX_MODE autoneg NWAY_OPTION ,where SPEED_MODE = 1000 for 1000Mbps = 100 for 100Mbps = 10 for 10Mbps DUPLEX_MODE = half for half-duplex = full for full-duplex NWAY_OPTION = off for auto-negotiation off (true force) = on for auto-negotiation on (nway force) For example: # ethtool -s eth0 speed 100 duplex full autoneg on will force PHY to operate in 100Mpbs Full-duplex(nway force). Transmitting Jumbo Frames, whose packet size is bigger than 1500 bytes, please change mtu by the following command. # ifconfig ethX mtu MTU , where X=0,1,2. and MTU is configured by user. RTL8168B/8111B supports Jumbo Frame size up to 4 kBytes. RTL8168C/8111C and RTL8168CP/8111CP support Jumbo Frame size up to 6 kBytes. RTL8168D/8111D supports Jumbo Frame size up to 9 kBytes.

About

Linux device driver for Realtek Ethernet controllers (unofficial mirror)

Источник

How to Download Realtek Rtl8111XX Linux Driver

Hi! Here Below you find Links to Download and Install Realtek rtl8111XX Wireless Driver GNU/Linux Release.

And here below are included the Best known Alternatives to Download Realtek rtl8111XX Driver in Linux.

Moreover, the original Realtek Driver should support all the following PCI Express 10/100/1000M Gigabit Ethernet Adapters:

• RTL8125/8125B(S)
• RTL8168B/8111B
• RTL8168C/8111C
• RTL8168CP/8111CP
• RTL8168D/8111D
• RTL8168DP/8111DP
• RTL8168E/8111E
• RTL8111G/8111H
• RTL8411/8411B

And again also the PCI Express 10/100M Fast Ethernet Interfaces:

• RTL8101E
• RTL8102E
• RTL8103E
• RTL8105E
• RTL8106E
• RTL8107E
• RTL8401
• RTL8402

Especially relevant: for USB Dongles you may try the given Alternative Driver.

The Guide includes detailed instructions on How to Install Realtek rtl8111XX Driver on GNU/Linux Computers.

Finally, Relax and Take it Easy because this Setup may result Tricky and Time-consuming.

Downloading Realtek rtl8111XX GNU/Linux Driver

But for the Ubuntu Based OSes you may try instead the rtl8125 PPA or also the default rtl8168 Dkms Driver
Rather for Arch Linux based first you may see the:
Arch Package.
Or: AUR Package.
To check the Kernel Version play:

Источник

Step-by-step – Realtek RTL8111 Driver Red Hat Linux 8 Installation Guide

GNU/Linux Red Hat 8 Installing Realtek RTL8111 Driver Guide

You Are Welcome! The Tutorial shows you Step-by-Step How to Install Realtek RTL8111 Driver in Red Hat Enterprise GNU/Linux 8.x.

Finally, this Realtek RTL8111 Driver Red Hat Linux 8 Setup should support All the following PCI Express 10/100/1000M Gigabit Ethernet Adapters:

• RTL8125/8125B(S)
• RTL8168B/8111B
• RTL8168C/8111C
• RTL8168CP/8111CP
• RTL8168D/8111D
• RTL8168DP/8111DP
• RTL8168E/8111E
• RTL8111G/8111H
• RTL8411/8411B

And again also the PCI Express 10/100M Fast Ethernet Interfaces:

• RTL8101E
• RTL8102E
• RTL8103E
• RTL8105E
• RTL8106E
• RTL8107E
• RTL8401
• RTL8402

1. Launching Shell Emulator

Contents

Showing Ads here is the best solution I found for not embarassing somebody about participating in a #%$Foundation^.

«When the Last Tree has been cut down, the Last Fish caught, the Last River poisoned, only then will we realize that One Cannot Eat Money.»

«No usable Computer exists today with completely Open Software and Hardware (as much as some companies want to Market themselves as such).»

Follow Us

The GNU/Linux Free Software Phylosophy

Steve Jobs’ Last Words

«Being a Winner in a Free Computing OS Mission means to adopt a Commercial like Strategy. Transcending Duality in Oneness and so dispensing both Free and Non Free Software. Cause evangelizing Freedom in a Non Free World is like keeping a Trojan Horse. Hallelujah!»

«Using the Money just for buying Stuff and Not Supporting the Free Gift Philosophy is a sign of a Selfish and Narrow Mind.»

What can Save the World from a Blind and Quick Self-destruction.
The Immediate and Humble Mass Conversion to the Spiritual Way!
Because Earth & Nature has been Ravaged without Pity by the Wild and Selfish mass Competition to Win and Shown that U’re someone Better because you got a Lot of fla$hY Power$$$.

«Taking care if somebody is liking, following, or buying is just a serious hidrance on the priceless Way of Creative Freedom.»

Credits

Everlasting Glory to God, Jesus Christ, The Holy Spirit, Ganesha, Shiva, Vishnu, Krisna, Laozi, Buddha, Bodhidharma, Ma Gcig, Hakuin, Ikkyu, Nagarjuna, Tilopa, Naropa, Milarepa, Suhrawardi, St Dismas, St Francesco, St Teresa, St John, St Filippo, Eckehart. All The Holy Divinities, Avatars, Saints, Mystics, and True Spiritual Masters. Because they are in the Eternal Light of Truth & Delight Enlightening a World of Darkness, Nescience, Blindness, Uneasiness and Falsehood!

Источник