- Загрузки для TL-MR6400 V5.3
- Файлы для провайдеров
- Как выполнить обновление прошивки
- Видео по настройке
- How to Set up TP-Link 4G WiFi Router
- FAQ
- Приложение
- Download for TL-MR6400 V5.2
- ISP File
- To Upgrade
- Setup Video
- How to Set up TP-Link 4G WiFi Router
- Vanliga frågor
- Firmware
- To Upgrade
- To Use Third Party Firmware In TP-Link Products
- Open Source Code For Programmers (GPL)
- Apps
Загрузки для TL-MR6400 V5.3
Доступность модели и аппаратной версии может изменяться в зависимости от региона. Не забудьте подтвердить указанные данные при рассмотрении вопроса о покупке.
Файлы для провайдеров
Как выполнить обновление прошивки
Обновление программного обеспечения (прошивки) способно решить проблемы предыдущих версий прошивки и улучшить работу устройства. Во избежание возникновения проблем при обновлении ознакомьтесь со следующей информацией.
Проверьте соответствие аппаратной версии и версии прошивки — установка неверной версии может привести к неисправности устройства и аннулировать гарантию (обычно версия 1.x = версия 1). Как узнать аппаратную версию устройства?
Не рекомендуется устанавливать прошивку, предназначенную для другого региона. Нажмите здесь для выбора региона и загрузите последнюю версию прошивки.
Не отключайте питание во время обновления — это может привести к неисправности устройства.
Обновляйте прошивку роутера по Wi-Fi только тогда, когда это является единственно возможным способом.
Перед обновлением рекомендуется закрыть на компьютере все программы, для работы которых требуется интернет-подключение, или просто отсоединить сетевой кабель от устройства.
Перед выполнением обновления файл с прошивкой необходимо извлечь из архива с помощью архиватора (например, WinRAR или WinZIP).
Изменения
1. Обновлён профиль APN для CUHK.
Примечания
1. Совместимые модели: Archer MR600, Archer MR400, Archer MR200, TL-MR6400, TL-MR100, M7200, M7350, M7450, M7650.
2. После установки этой версии вернуться к предыдущей версии будет невозможно.
Видео по настройке
How to Set up TP-Link 4G WiFi Router
Фильтр: Все Устранение неисправностей Руководство по настройке Во время настройки
FAQ
- Почему на iOS 14 появляется предупреждение о низком уровне безопасности при подключении к Wi‑Fi устройству TP‑Link? 01-25-2021 308465
- What should I do if my TP-Link 4G LTE Router cannot detect SIM card? 06-20-2023 27058
- How to check the 4G band working on our smartphones 06-20-2023 18371
- Troubleshooting Guide of DDNS function on TP-Link Wi-Fi Router, LTE Gateway Router or Deco Router 06-20-2023 8448
- Troubleshooting guide of no internet access with TP-Link Wireless 4G LTE Router working as 3G/4G Router Mode 05-17-2023 50094
- What should I do if no APN profile or wrong APN profile is detected by TP-Link Wireless 4G LTE Router? 05-16-2023 33134
- How to Set up TP-Link Wireless 4G LTE Router on Tether App 10-26-2022 57937
- How to troubleshoot if I have low speed with TP-Link Wireless 4G LTE Router working as 3G 4G Router Mode 10-19-2022 45201
- How to log into the web-based management interface of TP-Link Wireless 4G LTE Router 06-27-2022 364236
- How to troubleshoot if remote management does not work on LTE Gateway Router with 3G/4G Router mode 06-24-2022 22187
- How do I install a SIM card for my 4G Wi-Fi router or Mobile Wi-Fi? 09-24-2021 154221
Приложение
TP-Link Tether
Приложение Tether компании TP‑Link обеспечивает удобное управление сетью через любое устройство, работающее на операционной системе Android или iOS. Ознакомьтесь с дополнительной информацией о приложении Tether и списком совместимых устройств.
Примечание: для работы приложения Tether необходимо обновить прошивку устройства TP-Link до последней версии.
Подписаться на рассылку Мы с ответственностью относимся к вашим персональным данным. Полный текст положения об обработке персональных данных доступен здесь. С нашими условиями использования и программой улучшения пользовательского опыта можно ознакомиться здесь.
Download for TL-MR6400 V5.2
IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
ISP File
An ISP file upgrade can update ISP information into the latest verison to improve it’s current compatibility.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade ISP file from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong ISP file upgrade may damage your device and void the warranty. (Normally V1.x=V1)
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during ISP file upgrade process, it’s recommended to upload ISP file with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
Modifications and Bug Fixes:
1. Updated the APN information of Lebara in KSA.
Notes
1. This ISP file can be used for Archer MR600/Archer MR400/Archer MR200/TL-MR6400/TL-MR100/M7200/M7350/M7450/M7650
2. The ISP file version cannot be downgraded
Setup Video
How to Set up TP-Link 4G WiFi Router
Feature Filter: All Troubleshooting Configuration Guide When You Set Up Further Assistance
Vanliga frågor
- Varför får jag varningar om svag säkerhet på min apple enhet? 02-11-2021 308465
- What should I do if my TP-Link 4G LTE Router cannot detect SIM card? 06-20-2023 27058
- How to check the 4G band working on our smartphones 06-20-2023 18371
- Troubleshooting Guide of DDNS function on TP-Link Wi-Fi Router, LTE Gateway Router or Deco Router 06-20-2023 8448
- Troubleshooting guide of no internet access with TP-Link Wireless 4G LTE Router working as 3G/4G Router Mode 05-17-2023 50094
- What should I do if no APN profile or wrong APN profile is detected by TP-Link Wireless 4G LTE Router? 05-16-2023 33134
- How to Set up TP-Link Wireless 4G LTE Router on Tether App 10-26-2022 57937
- How to troubleshoot if I have low speed with TP-Link Wireless 4G LTE Router working as 3G 4G Router Mode 10-19-2022 45201
- Hur man loggar in i webb administrationsgränssnittet. (SE) 07-02-2019 364236
- How to select 4G band manually on the web interface of LTE Gateway Routers 06-27-2022 52606
- How to troubleshoot if remote management does not work on LTE Gateway Router with 3G/4G Router mode 06-24-2022 22187
- How do I install a SIM card for my 4G Wi-Fi router or Mobile Wi-Fi? 09-24-2021 154221
- Hur ändrar man DNS inställningarna för sin 4G router? SE 10-15-2019 4059
- Vanliga frågor och svar. SE 09-02-2019 22675
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
Modifications and Bug Fixes
1. Added IPSec VPN Server and support strongswan
2. Added LTE band selection and data roaming switch on Tether App
3. Updated ISP file version to 2021072301
4. Fixed the issue of PIN code still required after reinserting SIM card with Auto-Unlock PIN enabled
5. Fixed internet connection issue after searching 4G band manually for many times
6. Fixed issue of unable to receive cascade sms
Modifications and Bug Fixes
First firmware released
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product’s warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
TP-Link Tether
TP-Link Tether provides the easiest way to access and manage your network with your iOS or Android devices. Learn more about TP-Link Tether and Compatible Devices
Note: To use Tether, please update your TP-Link device’s firmware to the latest version.