Роутер zte f680 мтс пароль

ZTE F680 Default Router Login

To get access to your ZTE F680, you need the IP of your device, the username and password. You’ll find such information in the Manual of your ZTE F680 router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it’s necessary that you are connected to the router.

ZTE F680 Login Guide

• Open your web browser (e.g. Chrome, Firefox, Opera or any other browser)
• Type 192.168.1.1 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface.
• You should see 2 text fields where you can enter a username and a password.
• Check the bottom of your router. There you will find your login credentials. If not then have a look at the manual of your router.
• Enter the username & password, hit «Enter» and now you should see the control panel of your router.

If above login credentials doesn’t work with your ZTE F680 router then try this method

Try different ID/password combinations that are widely used by ZTE that you’ll find below. In this list are the most popular default username and password combinations used by ZTE. Sometimes the username and password doesn’t work that we mentioned in the top of this guide. Then you can try these username/password combinations below to get access to your ZTE F680 wireless router.

#	Username	Password
1	admin	admin
2	user	user
3	(blank)	admin
4	admin
5	admin
6	1admin0	ltecl4r0
7	user	(blank)
8	(blank)	(blank)
9	(blank)	attadmin
10	cytauser	cytauser
11	admin	password
12	(blank)	password
13	admin	printed on router
14	3play	3play
15	attadmin
16	ZXDSL	ZXDSL
17	password
18	HPN	(blank)
19	(blank)	smartbro
20	admin	on router label
21	admin	bayandsl
22	attadmin	attadmin
23	Administrator	admin
24	mtn	admin

Default login IPs for my ZTE router

You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer ZTE. Maybe this will work for you.

#	Default Router IP
1	192.168.1.1
2	192.168.0.1
3	192.168.2.254
4	192.168.1.254
5	192.168.8.1
6	192.168.100.1
7	192.168.128.1
8	192.168.200.1

Nothing of the methods worked for me and I still not get access to my ZTE F680!

All you need to do is to reset your F680 modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert’s assistance in this regard. Note: If you have not enough information, it is obviously recommended that you should get help from a person who has all the knowledge about this topic.

Источник

ZTE F680 router setup & security

1. To login to ZTE F680 Router, Open your web browser and type the default IP Address 192.168.1.1 in the address bar
2. You should now see the router login page with 2 text fields where you can type a username and a password
3. The default username for your ZTE F680 router is admin and the default password is admin
4. In the login page of the router’s web user interface, type-in the username & password, hit «Login» and now you should see the ZTE F680 router control panel

(Remember, you must be at home and connected to home WiFi to do this)

And no need to get your breathing rates high in case you have changed the username / password of ZTE F680 and forgot them, as you can just reset the ZTE F680 router by press-and-hold the reset button with a clip for about 15 seconds.

ZTE F680 Quick links:

Try one of these most Common Passwords

Username	Password
admin	admin
admin	blank
admin	password
blank	admin
blank	blank

Is this not your router model ? Search your router

2.Change ZTE F680 Default Login and Password

Since, security of a network is vital, the first and foremost task is to change the ZTE F680 router Default Login and Password to something more personal and secure.

ZTE F680 Router Password Tips:

Choose a complex and hard-to-guess password for your ZTE which only you can remember

It should be something personal, like &ilostmyvirginity@30, so that you’ll never forget it. Ever

Protect it

The amount of protection directly depends on the password complexity, and the effort taken to protect that password on your ZTE F680 router.

Usability first

Give Password for your ZTE F680 router that you can remember (usability first). Of course, you can build a strong hash password with special characters, numbers, Greek, and Latin. But ultimately you’ll end up writing it on a sticky and putting it on the router, which defeats the purpose. Here is an example $lasttriptovegas0916

You did good so far. Now consider ⭐ Bookmarking this page. It always helps.

3.Change ZTE F680 Default WiFi name (SSID) and WiFi Password and enable Network Encryption

Another small suggestion (as it has no impact on security), is to change the ZTE F680 Default WiFi name (SSID) as it will make it more obvious for others to know which network they are connecting to.

Look for Network Name (SSID), this is the WiFi name of your ZTE F680 Router. Do not use your name, home address, or other personal information (since this isn’t a Facebook status!) in the SSID name. (No Mr.Paul&Princy) A few funny WiFi name suggestions: I’m cheating on my WiFi!, FBI Surveillance Van #594 (scares away stupid criminals), Lord of the Pings .

Once you enter the name for your network, you have to enable WPA2-PSK encryption on your ZTE F680 router. That’s the strongest encryption standard available for home networks.

Enter a new WPA Pre-Shared Key / WiFi Password – this is the password that you will use to connect to your home WiFi. Keep it to 16-20 characters (please!) don’t use the same password that you used for ZTE F680 router login!

🤓 Geek out your guests. Print a Free WiFi QR Code Sticker for your fridge now

4.Update router firmware in ZTE F680 and turn on Automatic Updates

Router software often contains critical bugs and security vulnerabilities; Check if your router has known vulnerabilities

Its important that you turn on Automatic Firmware updates and always keep your ZTE F680 router up-to-date. To turn on Automatic updates, Login to your ZTE F680 router and look for the section which contains Automatic updates and turn it «ON»

And even if the router has auto-update, check every now and then to make sure it is actually working, and the router firmware is up-to-date. If your router manufacturer hasn’t released any updates to the firmware in the past 3-5 years, consider upgrading to a «newer» router

5.Security is a continuous process

Just keep in mind to change the passwords often or at least once in every 6 months! on your ZTE F680 You don’t want the safety you have worked so hard for to fail just because of ignorance, negligence, or casual laziness! Time for a bulletin on the fridge, folks! We can remind you though? Enter your email below! Nope, we are not spammers!

ZTE F680 Router Reset instructions

How to Reset the ZTE F680 Router To Factory Default

1. Turn on the ZTE F680 router
2. Look for the reset button. Few routers have a tiny hole and few others have a reset button.
3. Press the Factory reset button with a straightened paperclip pin or something that gets through the tiny hole, and hold it for about 15 seconds! (till you see all the lights flashing)
4. The ZTE F680 router will reboot automatically. the unit has been reset and is ready to use. You can start from Step 1 in this guide to set it up.

ZTE F680 Password Does not Work

Passwords find a way to not work! Or, in most cases, users find a way to forget them! In either case, look up the How to Reset the ZTE F680 Router To Default Settings section

Forgot Password for ZTE F680 Router

Incase if you have changed the default username and password of ZTE F680 and forgot it, please see How to Reset the ZTE F680 Router To Default Settings section

How to boost ZTE F680 WiFi and overcome connectivity issues

1.Place the ZTE F680 in a perfect spot

The perfect spot does it all; be it romance or your router! To avail the best signal and network connectivity, make sure you keep your ZTE F680 router visible and not facing the wall or behind the curtains

2.Find a Good Wireless Channel Instead of Auto on your ZTE F680 router

Auto-channels might fail you once in a while; believe that you’re smarter than the ZTE router! Find a seamless wireless channel instead of what the router finds automatically. This would ensure that your signal doesn’t interfere with that of your neighbors.

If you’re running a Windows-based PC, you can see what channels neighboring Wi-Fi networks are using.

• Press Start > type “cmd”. Open Command prompt
• In command prompt type netsh wlan show all

You will see a list of all wireless networks and the channels being used in your vicinity. instead of using “Auto” for the control channel, Pick the channel that has the lowest interference

3.Check the frequency of ZTE F680

Check if ZTE F680 has dual-band, the most commonly used band would be 2.4GHz; however, switching to 5GHz would bring out better results! It depends on your device though; if you’re running an old lad, you might have to switch back to the conventional

4.Hardwire gaming consoles / media streamers into your ZTE F680 instead of WiFi

Gaming consoles/media streamers work better when connected through Ethernet cable of ZTE F680; in fact, as you might not be moving your TV all over the house, why connect it to the Wi-Fi at all? The Gaming consoles / video streaming devices flood the network with data. This means that if possible, you should consider hardwire (using Ethernet cable) the devices that tend to consume a lot of bandwidth. Although this can sort of defeat the purpose of having wireless networks, it can actually help your overall network speed of ZTE F680 if you can hardwire the bandwidth hogs.

5. Reboot ZTE F680 on schedule

Here’s something important to note! On schedule, folks, reboot your ZTE F680 router! Though routers are built to constantly be running at all times, simple tweaks like regular power cycling (a fancy way of saying, unplugging the power cord and shoving it back up) helps with most issues. Rebooting your ZTE F680 can fix Internet connection problems, improve slow moving connections, and resolve wireless issues altogether. Try unplugging your ZTE modem on a quarterly basis to stay proactive (Never reset; always reboot router)

Источник