Главная » Роутеры

Роутера trendnet 432 brp

На чтение 10 мин Просмотров 1 Опубликовано
Содержание
  1. 54Mbps Wireless G Broadband Router
  2. 54Mbps Wireless G Broadband Router
  3. Register your Product
  4. Support Ticket
  5. Contact Support

54Mbps Wireless G Broadband Router

TEW-432BRP

The TEW-432BRP (Version D1.2R/D1.3R) has been discontinued. It has been replaced by the TEW-831DR (Version v1.0R). For a list of discontinued products, click here.

The 54Mbps Wireless G Router offers a complete wireless solution that allows you to share files, an Internet connection, or network resource while protecting your network using enhanced security features. Simply plug your workstations and your broadband modem into the Wireless G router, and configure your broadband connection using its built-in Web Interface.

Use the VirtualServer feature to configure any workstation as a Web Server or FTP server easily, allowing users to view files from the Internet. You can also protect your Wireless LAN using64/128-bit WEP encryption or industry standard WPA-PSK with TKIP or AES algorithms. Increase security by enabling MAC, IP, or Protocol Filtering as well as setting Firewall Rules to limit Internet Access or block malicious intruders from accessing your network.

*Note: Coverage and Speed performance might vary depending on the network environment.

  • Wi-Fi compliant with IEEE 802.11g and 802.11b devices
  • Supports Cable/DSL modems with Dynamic IP, Static IP, PPPoE, PPTP or L2TP connection types
  • DHCP server feature allocates up to253 client IP addresses
  • Supports 64/128-bit Wired Equivalent Privacy (WEP)
  • Supports 802.1x WPA/WPA2, WPA-PSK/WPA2-PSKfor Advance Security
  • Supports MAC Address, Protocol, IP Filters and UPnP (Universal Plug & Play)
  • Supports Domain and URL blockings
  • Traffic control with Virtual Server, Virtual PC Mapping and DMZ
  • Provides additional security with NAT/SPI firewall and attack alert via Emails
  • Provides additional security of Enable/Disable SSID, password protection
  • Supports Static and Dynamic Routing
  • Supports WPS (Wireless Protected Setup) for easy secure connection
  • Supports IPSec and PPTP VPN Pass-Through sessions
  • Flash Memory for Firmware upgrade, save/restore settings, and Traffic Log
  • Easy management via Web browser (HTTP) and Remote Management
  • Range for indoor of 30 ~ 50 meters (depending on the environment)
  • Range for outdoor of 50 ~ 200meters (depends on the environment)
  • 3-year limited warranty
  • Wired: IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX), ANSI/IEEE 802.3 Auto Negotiation
  • Wireless: IEEE 802.11b (11Mbps), IEEE 802.11g (54Mbps)
  • 1 x 10/100Mbps Auto-MDIX Port (Internet)
  • 4 x 10/100Mbps Auto-MDIX Port
  • Dynamic IP, Static (Fixed) IP, PPPoE, PPTP, L2TP
  • TCP/IP, NAT, PPPoE/PPTP/L2TP, HTTP, DHCP server/client
  • System, WAN, WLAN, LAN, WPS
  • 155 x 110 x 30 mm (6 x 4.3 x 1.2 inches)
  • 226g (8 oz.)
  • Operation: 0°~ 40°C (32°F~ 104°F)
  • Storage:-10°~ 70°C (14°F~ 158°F)
  • Max. 95% (Non-Condensing)
  • 7.5V DC, 1A External Power Adapter
  • FCC &CE
  • 2.412 ~ 2.484GHz (Industrial Scientific Medical Band)
  • 802.11b: CCK (11 and 5.5Mbps), DQPSK (2Mbps),DBPSK (1Mbps)
  • 802.11g: OFDM
  • 1 x 2dBi External Detachable Dipole Antenna (Female Reverse SMA Connector)
  • CSMA/CA with ACK
  • 64/128-bit WEP (HEX/ASCII),802.1x WPA/WPA2, WPA-PSK/WPA2-PSK, MAC Address Filter, Protocol Filter, Domain Filter
  • 802.11b: 15 ± 2dBm; 802.11g: 14 ± 2dBm
  • 802.11b:11Mbps, 5.5Mbps, 2Mbps, and 1Mbps
  • 802.11g: 54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps,12Mbps, 9Mbps and 6Mbps
  • 11Mbps8% PER @ -82 dBm (typical)
  • 54Mbps 10% PER @ -65 dBm (typical)
  • 11 Channels (US), 13 Channels (EU)
  • TEW-432BRP
  • Multi-Language QIG
  • CD-ROM (User’s Guide)
  • Power Adapter (7.5V, 1A)
  • RJ-45 Cat. 5 Cable (1.5M)
Читайте также:  Tp link беспроводной роутер archer ax50

Все значения скорости приведены только в целях сравнения. Технические характеристики, размер и форма продукта могут быть изменены без предварительного уведомления, а фактический внешний вид продукта может отличаться от описанного в настоящем документе.

Источник

54Mbps Wireless G Broadband Router

TEW-432BRP

The TEW-432BRP (Version D1.2R/D1.3R) has been discontinued. It has been replaced by the TEW-831DR (Version v1.0R). For a list of discontinued products, click here.

DO NOT upgrade firmware on any TRENDnet product using wireless connection.
Firmware upgrade over wireless connection may damage the product. Please perform firmware upgrade with «wired» network connection only

Firmware Version: 3.10B20
Release Date: 1/2013
Note:

JPEG Image
File Size: 415.93 kb
Date: 9/10/2009
Download

JPEG Image
File Size: 346.77 kb
Date: 9/10/2009
Download

JPEG Image
File Size: 483.24 kb
Date: 9/10/2009
Download

TIFF Image
File Size: 2.47 mb
Date: 9/10/2009
Download

TIFF Image
File Size: 2.18 mb
Date: 9/10/2009
Download

TIFF Image
File Size: 3.90 mb
Date: 9/10/2009
Download

Step 1 The TEW-432BRP is connected behind a modem router or another router. To verify this, log onto the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. The default username is admin with a password of admin. They are case sensitive. Step 2 Click.

The EasyGo setup will only work on a Windows PC. If you want to setup the router from a non-Windows PC, follow the steps below. Step 1 Connect an Ethernet cable from your modem to the WAN port on the router. Step 2 Connect a second Ethernet cable from your computer to one of the 4 LAN port.

Step 1 Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. In an indoor environment try to position the wireless devices so that the signal pass.

Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. The default username is admin with a password of admin. Step 2 Click on «Main» on the left hand side then click on «LAN&DHCP Server». Step 3 Click on «Disable» on the «D.

Читайте также:  Соединение видеокамеры с роутером

Make sure that you are using Internet Explorer and not an unsupported browser like Fire Fox. You can also clear the cache in your browser to ensure you are not looking at a cached image of the web page.

First make sure you have the router physically connected properly. Connect the DSL modem via Ethernet to the WAN port of the TEW-432BRP. If you have any computers that need to be hard wired into the router you will connect them to one of the four LAN ports. Make sure the connection from the modem.

For Well Known Ports Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin). Click on «Cancel» if the Setup Wizard comes up. Click on «Access» on the left hand side. .

Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin).Step 2 Click on «Wireless» on the left hand side then click on «Security» below wireless. Next select «Security» from t.

Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin).

Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. At the login, enter your username (admin) and password (admin). Step 2 Click on «Main» on the left hand side then click on «LAN&DHCP Server». Step 3 Enter in the new va.

> Firmware upgrade failure may permanently damage the unit and causing it not to function. If the issues in the «Release Notes» do not address the problem you are experiencing with the router, please do not upgrade the firmware. Do not perform the upgrade if the router’s firmware is newer than th.

Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.10.1. The default username is admin with a password of admin. Step 2 Click «Tools» on the left hand side then click on «Settings». .

Press and hold in the reset button on the back of the router for approximately 15 seconds while the power is on.

Step 1 Log into the router by entering it’s IP address into a browser. The default IP address is https://192.168.1.1. At the login, enter your username (admin) and password (admin). Step 2 Click «Status» on the left hand side then click on «Device Information». .

Читайте также:  Маршрутизатор d link di 707p

Step 1 Log into the router by entering its IP address into a browser. The default IP address is https://192.168.1.1. At the login, enter your username (admin) and password (admin). Step 2 Click on «Wireless» on the left hand side then click on «WEP». Step 3 Enter in the desired encryption.

The default IP address is https://192.168.1.1. The default username is (admin) and the default password is (admin).

First make sure you have the router physically connected properly. Connect the DSL modem via Ethernet to the WAN port of the TEW-432BRP. If you have any computers that need to be hard wired into the router you will connect them to one of the four LAN ports. Make sure the connection from the.

  • Wired: IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX), ANSI/IEEE 802.3 Auto Negotiation
  • Wireless: IEEE 802.11b (11Mbps), IEEE 802.11g (54Mbps)
  • 1 x 10/100Mbps Auto-MDIX Port (Internet)
  • 4 x 10/100Mbps Auto-MDIX Port
  • Dynamic IP, Static (Fixed) IP, PPPoE, PPTP, L2TP
  • TCP/IP, NAT, PPPoE/PPTP/L2TP, HTTP, DHCP server/client
  • System, WAN, WLAN, LAN, WPS
  • 155 x 110 x 30 mm (6 x 4.3 x 1.2 inches)
  • 226g (8 oz.)
  • Operation: 0°~ 40°C (32°F~ 104°F)
  • Storage:-10°~ 70°C (14°F~ 158°F)
  • Max. 95% (Non-Condensing)
  • 7.5V DC, 1A External Power Adapter
  • FCC &CE
  • 2.412 ~ 2.484GHz (Industrial Scientific Medical Band)
  • 802.11b: CCK (11 and 5.5Mbps), DQPSK (2Mbps),DBPSK (1Mbps)
  • 802.11g: OFDM
  • 1 x 2dBi External Detachable Dipole Antenna (Female Reverse SMA Connector)
  • CSMA/CA with ACK
  • 64/128-bit WEP (HEX/ASCII),802.1x WPA/WPA2, WPA-PSK/WPA2-PSK, MAC Address Filter, Protocol Filter, Domain Filter
  • 802.11b: 15 ± 2dBm; 802.11g: 14 ± 2dBm
  • 802.11b:11Mbps, 5.5Mbps, 2Mbps, and 1Mbps
  • 802.11g: 54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps,12Mbps, 9Mbps and 6Mbps
  • 11Mbps8% PER @ -82 dBm (typical)
  • 54Mbps 10% PER @ -65 dBm (typical)
  • 11 Channels (US), 13 Channels (EU)
  • TEW-432BRP
  • Multi-Language QIG
  • CD-ROM (User’s Guide)
  • Power Adapter (7.5V, 1A)
  • RJ-45 Cat. 5 Cable (1.5M)

All references to speed are for comparison purposes only. Product specifications, size, and shape are subject to change without notice, and actual product appearance may differ from that depicted herein.

Image Description

Register your Product

Register your product to stay informed with the latest product updates and warranty information.

Image Description

Support Ticket

Need help with your product? Submit and track the resolution of your issue online.

Image Description

Contact Support

Contact our helpful and friendly support staff for product installation and troubleshooting questions.

Источник

Оцените статью
© 2023 Posetke
Adblock
detector