Rsync in linux command

10 Practical Examples of Rsync Command in Linux

Rsync (Remote Sync) is the most commonly used command for copying and synchronizing files and directories remotely as well as locally in Linux/Unix systems.

With the help of the rsync command, you can copy and synchronize your data remotely and locally across directories, disks, and networks, perform data backups, and mirror between two Linux machines.

This article explains 10 basic and advanced usage of the rsync command to transfer your files remotely and locally in Linux-based machines. You don’t need to be a root user to run the rsync command.

Some Advantages and Features of Rsync Command

• It efficiently copies and sync files to or from a remote system.
• Supports copying links, devices, owners, groups, and permissions.
• It’s faster than scp (Secure Copy) because rsync uses a remote-update protocol which allows transferring just the differences between two sets of files. The first time, it copies the whole content of a file or a directory from source to destination but from next time, it copies only the changed blocks and bytes to the destination.
• Rsync consumes less bandwidth utilization as it uses compression and decompression method while sending and receiving data on both ends.

The basic syntax of the rsync command

# rsync options source destination

Some common options used with rsync commands

• -v : verbose
• -r : copies data recursively (but don’t preserve timestamps and permission while transferring data.
• -a : archive mode, which allows copying files recursively and it also preserves symbolic links, file permissions, user & group ownerships, and timestamps.
• -z : compress file data.
• -h : human-readable, output numbers in a human-readable format.

Install Rsync in Linux System

We can install the rsync package with the help of the following command in your Linux distribution.

$ sudo apt-get install rsync [On Debian/Ubuntu & Mint] $ pacman -S rsync [On Arch Linux] $ emerge sys-apps/rsync [On Gentoo] $ sudo yum install rsync [On Fedora/CentOS/RHEL and Rocky Linux/AlmaLinux] $ sudo zypper install rsync [On openSUSE]

1. Copy/Sync Files and Directory Locally

Copy/Sync a File on a Local Computer

The following command will sync a single file on a local machine from one location to another location. Here in this example, a file name backup.tar needs to be copied or synced to /tmp/backups/ folder.

[[email protected]]# rsync -zvh backup.tar.gz /tmp/backups/ created directory /tmp/backups backup.tar.gz sent 224.54K bytes received 70 bytes 449.21K bytes/sec total size is 224.40K speedup is 1.00

In the above example, you can see that if the destination is not already existed rsync will create a directory automatically for the destination.

Copy/Sync a Directory on Local Computer

The following command will transfer or sync all the files from one directory to a different directory in the same machine. Here in this example, /root/rpmpkgs contains some rpm package files and you want that directory to be copied inside /tmp/backups/ folder.

[[email protected]]# rsync -avzh /root/rpmpkgs /tmp/backups/ sending incremental file list rpmpkgs/ rpmpkgs/httpd-2.4.37-40.module_el8.5.0+852+0aafc63b.x86_64.rpm rpmpkgs/mod_ssl-2.4.37-40.module_el8.5.0+852+0aafc63b.x86_64.rpm rpmpkgs/nagios-4.4.6-4.el8.x86_64.rpm rpmpkgs/nagios-plugins-2.3.3-5.el8.x86_64.rpm sent 3.47M bytes received 96 bytes 2.32M bytes/sec total size is 3.74M speedup is 1.08

2. Copy/Sync Files and Directory to or From a Server

Copy a Directory from Local Server to a Remote Server

This command will sync a directory from a local machine to a remote machine. For example, there is a folder in your local computer “rpmpkgs” that contains some RPM packages and you want that local directory’s content sends to a remote server, you can use the following command.

[[email protected]:~]# rsync -avzh /root/rpmpkgs [email protected]:/root/ The authenticity of host '192.168.0.141 (192.168.0.141)' can't be established. ED25519 key fingerprint is SHA256:bH2tiWQn4S5o6qmZhmtXcBROV5TU5H4t2C42QDEMx1c. This key is not known by any other names Are you sure you want to continue connecting (yes/no/[fingerprint])? yes Warning: Permanently added '192.168.0.141' (ED25519) to the list of known hosts. [email protected]'s password: sending incremental file list rpmpkgs/ rpmpkgs/httpd-2.4.37-40.module_el8.5.0+852+0aafc63b.x86_64.rpm rpmpkgs/mod_ssl-2.4.37-40.module_el8.5.0+852+0aafc63b.x86_64.rpm rpmpkgs/nagios-4.4.6-4.el8.x86_64.rpm rpmpkgs/nagios-plugins-2.3.3-5.el8.x86_64.rpm sent 3.74M bytes received 96 bytes 439.88K bytes/sec total size is 3.74M speedup is 1.00

Copy/Sync a Remote Directory to a Local Machine

This command will help you sync a remote directory to a local directory. Here in this example, a directory /root/rpmpkgs which is on a remote server is being copied in your local computer in /tmp/myrpms.

[[email protected]:~]# rsync -avzh [email protected]:/root/rpmpkgs /tmp/myrpms [email protected]'s password: receiving incremental file list created directory /tmp/myrpms rpmpkgs/ rpmpkgs/httpd-2.4.37-40.module_el8.5.0+852+0aafc63b.x86_64.rpm rpmpkgs/mod_ssl-2.4.37-40.module_el8.5.0+852+0aafc63b.x86_64.rpm rpmpkgs/nagios-4.4.6-4.el8.x86_64.rpm rpmpkgs/nagios-plugins-2.3.3-5.el8.x86_64.rpm sent 104 bytes received 3.49M bytes 997.68K bytes/sec total size is 3.74M speedup is 1.07

3. Rsync Over SSH

With rsync, we can use SSH (Secure Shell) for data transfer, using SSH protocol while transferring our data you can be ensured that your data is being transferred in a secured connection with encryption so that nobody can read your data while it is being transferred over the wire on the internet.

Also when we use rsync we need to provide the user/root password to accomplish that particular task, so using the SSH option will send your logins in an encrypted manner so that your password will be safe.

Copy a File from a Remote Server to a Local Server with SSH

To specify a protocol with rsync you need to give the “-e” option with the protocol name you want to use. Here in this example, We will be using the “ssh” with the “-e” option and perform data transfer.

[[email protected]:~]# rsync -avzhe ssh [email protected]:/root/anaconda-ks.cfg /tmp [email protected]'s password: receiving incremental file list anaconda-ks.cfg sent 43 bytes received 1.10K bytes 325.43 bytes/sec total size is 1.90K speedup is 1.67

Copy a File from a Local Server to a Remote Server with SSH

[[email protected]:~]# rsync -avzhe ssh backup.tar.gz [email protected]:/backups/ [email protected]'s password: sending incremental file list created directory /backups backup.tar.gz sent 224.59K bytes received 66 bytes 64.19K bytes/sec total size is 224.40K speedup is 1.00

4. Show Progress While Transferring Data with rsync

To show the progress while transferring the data from one machine to a different machine, we can use the ‘–progress’ option. It displays the files and the time remaining to complete the transfer.

[[email protected]:/]# rsync -avzhe ssh --progress /root/rpmpkgs [email protected]:/root/rpmpkgs [email protected]'s password: sending incremental file list rpmpkgs/ rpmpkgs/httpd-2.4.37-40.module_el8.5.0+852+0aafc63b.x86_64.rpm 1.47M 100% 31.80MB/s 0:00:00 (xfr#1, to-chk=3/5) rpmpkgs/mod_ssl-2.4.37-40.module_el8.5.0+852+0aafc63b.x86_64.rpm 138.01K 100% 2.69MB/s 0:00:00 (xfr#2, to-chk=2/5) rpmpkgs/nagios-4.4.6-4.el8.x86_64.rpm 2.01M 100% 18.45MB/s 0:00:00 (xfr#3, to-chk=1/5) rpmpkgs/nagios-plugins-2.3.3-5.el8.x86_64.rpm 120.48K 100% 1.04MB/s 0:00:00 (xfr#4, to-chk=0/5) sent 3.74M bytes received 96 bytes 1.50M bytes/sec total size is 3.74M speedup is 1.00

5. Use of –include and –exclude Options

These two options allow us to include and exclude files by specifying parameters with these option helps us to specify those files or directories which you want to include in your sync and exclude files and folders with you don’t want to be transferred.

Here in this example, the rsync command will include those files and directory only which starts with ‘R’ and exclude all other files and directory.

[[email protected]:/]# rsync -avze ssh --include 'R*' --exclude '*' [email protected]:/var/lib/rpm/ /root/rpm [email protected]'s password: receiving incremental file list created directory /root/rpm ./ Requirename sent 61 bytes received 273,074 bytes 60,696.67 bytes/sec total size is 761,856 speedup is 2.79

6. Use of –delete Option

If a file or directory does not exist at the source, but already exists at the destination, you might want to delete that existing file/directory at the target while syncing.

We can use the ‘–delete‘ option to delete files that are not there in the source directory.

Source and target are in sync. Now create a new file test.txt at the target.

[[email protected]:~]# cd /root/rpm/ [[email protected]:~/rpm]# touch test.txt [[email protected]:~/rpm]# rsync -avz --delete [email protected]:/var/lib/rpm/ /root/rpm/ [email protected]'s password: receiving incremental file list deleting test.txt ./ .dbenv.lock .rpm.lock Basenames Conflictname Dirnames Enhancename Filetriggername Group Installtid Name Obsoletename Packages Providename Sha1header Sigmd5 Suggestname Supplementname Transfiletriggername Triggername __db.001 __db.002 __db.003 sent 445 bytes received 18,543,954 bytes 2,472,586.53 bytes/sec total size is 71,151,616 speedup is 3.84

Target has the new file called test.txt, when synchronizing with the source with the ‘–delete‘ option, it removed the file test.txt.

7. Set the Max Size of Files to be Transferred

You can specify the Max file size to be transferred or sync. You can do it with the “–max-size” option. Here in this example, the Max file size is 200k, so this command will transfer only those files which are equal to or smaller than 200k.

[[email protected]:~]# rsync -avzhe ssh --max-size='200k' /var/lib/rpm/ [email protected]:/root/tmprpm [email protected]'s password: sending incremental file list created directory /root/tmprpm ./ .dbenv.lock .rpm.lock Conflictname Enhancename Filetriggername Group Installtid Name Obsoletename Recommendname Requirename Sha1header Sigmd5 Suggestname Supplementname Transfiletriggername Triggername __db.002 sent 129.52K bytes received 396 bytes 28.87K bytes/sec total size is 71.15M speedup is 547.66

8. Automatically Delete source Files After Successful Transfer

Now, suppose you have the main web server and a data backup server, you created a daily backup and synced it with your backup server, now you don’t want to keep that local copy of backup in your web server.

So, will you wait for the transfer to complete and then delete that local backup file manually? Of Course NO. This automatic deletion can be done using the ‘–remove-source-files‘ option.

[[email protected]:~]# rsync --remove-source-files -zvh backup.tar.gz [email protected]:/tmp/backups/ [email protected]'s password: backup.tar.gz sent 795 bytes received 2.33K bytes 894.29 bytes/sec total size is 267.30K speedup is 85.40 [[email protected]:~]# ls -l backup.tar.gz ls: cannot access 'backup.tar.gz': No such file or directory

9. Do a Dry Run with rsync

If you are a newbie using rsync and don’t know what exactly your command going to do. Rsync could really mess up the things in your destination folder and then doing an undo can be a tedious job.

Use of this option will not make any changes to the files and shows the output of the command, if the output shows exactly the same you want to do then you can remove the ‘–dry-run‘ option from your command and run on the terminal.

[[email protected]:~]# rsync --dry-run --remove-source-files -zvh backup.tar.gz [email protected]:/tmp/backups/ [email protected]'s password: backup.tar.gz sent 50 bytes received 19 bytes 19.71 bytes/sec total size is 267.30K speedup is 3,873.97 (DRY RUN) 

10. Rsync Set Bandwidth Limit and Transfer File

You can set the bandwidth limit while transferring data from one machine to another machine with the the help of ‘–bwlimit‘ option. This option helps us to limit I/O bandwidth.

[[email protected]]# rsync --bwlimit=100 -avzhe ssh /var/lib/rpm/ [email protected]:/root/tmprpm/ [email protected]'s password: sending incremental file list sent 324 bytes received 12 bytes 61.09 bytes/sec total size is 38.08M speedup is 113347.05

Also, by default rsync syncs changed blocks and bytes only, if you want explicitly want to sync the whole file then you use the ‘-W‘ option with it.

[[email protected]]# rsync -zvhW backup.tar /tmp/backups/backup.tar backup.tar sent 14.71M bytes received 31 bytes 3.27M bytes/sec total size is 16.18M speedup is 1.10

That’s all with rsync now, you can see man pages for more options. Stay connected with Tecmint for more exciting and interesting tutorials in the future. Do leave your comments and suggestions.

Источник