Scroll in screen linux

GNU Screen

GNU Screen is a full-screen window manager that multiplexes a physical terminal between several processes, typically interactive shells. Programs running in Screen continue to run when their window is currently not visible and even when the whole screen session is detached from the user’s terminal.

See the official overview GNU Screen manual for the description of the features.

Installation

Usage

Commands are entered pressing the «escape key» Ctrl+a and then the key binding.

Some users find the default escape key Ctrl+a inconvenient. The escape key can be changed to another key as described in #Change the escape key.

Common Commands

  • Ctrl+a ? Displays commands and their defaults
  • Ctrl+a : Enter to the command prompt of screen
  • Ctrl+a » Window list
  • Ctrl+a 0 opens window 0
  • Ctrl+a A Rename the current window
  • Ctrl+a a Sends Ctrl+a to the current window
  • Ctrl+a c Create a new window (with shell)
  • Ctrl+a S Split current region horizontally into two regions
  • Ctrl+a | Split current region vertically into two regions
  • Ctrl+a tab Switch the input focus to the next region
  • Ctrl+a Ctrl+a Toggle between current and previous region
  • Ctrl+a Esc Enter Copy Mode (use enter to select a range of text)
  • Ctrl+a ] Paste text
  • Ctrl+a Q Close all regions but the current one
  • Ctrl+a X Close the current region
  • Ctrl+a d Detach from the current screen session, and leave it running. Use screen -r to resume

Command Prompt Commands

  • Ctrl+a :quit Closes all windows and closes screen session
  • Ctrl+a :source ~/.screenrc Reloads screenrc configuration file (can alternatively use /etc/screenrc )

Named sessions

To create a named session, run screen with the following command:

$ screen -S session_name 

To (re)name an existing a session, run the following command while screen is running:

Ctrl+a :sessionname session_name

To print a list of pid.tty.host strings identifying your screen sessions:

To attach to a named screen session, run this command:

$ screen -x session_name 
$ screen -r session_name 

Customizing Screen

You can modify the default settings for Screen according to your preference either through a personal .screenrc file which contains commands to be executed at startup (e.g. ~/.screenrc ) or on the fly in command mode (e.g. Ctrl+a :vbell off ).

Читайте также:  Puppy linux puppy package manager

Tips and tricks

Autostart with systemd

This service autostarts screen for the specified user (e.g. systemctl enable screen@florian ). Running this as a system unit is important, because systemd —user instance is not guaranteed to be running and will be killed when the last session for given the user is closed.

/etc/systemd/system/screen@.service
[Unit] Description=screen After=network.target [Service] Type=simple User=%i ExecStart=/usr/bin/screen -DmS autoscreen ExecStop=/usr/bin/screen -S autoscreen -X quit [Install] WantedBy=multi-user.target

Change the escape key

It can be a good idea to change the default escape key, not only because «a» is usually typed with the left pinky, but also because Ctrl+a is mapped to the common command beginning-of-line in GNU Readline and Bash-like shells.

The escape key can be changed with the escape option in ~/.screenrc , or the -e option to screen .

For example, if you find that you rarely type Ctrl+j in your shell or editor, you could use escape ^Jj to set the escape key to Ctrl+j . The second «j» means that a literal Ctrl+j can be sent to the terminal via the sequence Ctrl+j j . For Dvorak keyboard users, Ctrl+t ( escape ^Tt ) might be more convenient.

More exotic options include escape « which sets the escape key to ` , or escape ^^^ which sets it to Ctrl+^ .

The escape key is also called the «command character» in Screen documentation.

Start at window 1

By default, the first screen window is 0. If you would rather never have a window 0 and start instead with 1, add the following lines on your configuration:

bind c screen 1 bind ^c screen 1 bind 0 select 10 screen 1

Nested Screen Sessions

It is possible to get stuck in a nested screen session. A common scenario: you start an SSH session from within a screen session. Within the SSH session, you start screen. By default, the outer screen session that was launched first responds to Ctrl+a commands. To send a command to the inner screen session, use Ctrl+a a , followed by your command. For example:

Start Screen on every shell

For Bash and Zsh, add the following snippet to your .bashrc or .zshrc before your aliases:

if [[ -z "$STY" ]]; then screen -xRR session_name fi

Use 256 colors

This article or section is out of date.

Reason: screen 4.4 sets $TERM to screen.$TERM , although the manual says something different. There should be no need to modify it in ~/.screenrc . (Discuss in Talk:GNU Screen)

By default, Screen uses an 8-color terminal emulator. To enable more colors, you need to be using a terminal that supports them and set the correct term value. This will use terminfo to describe how the ANSI escape codes will be interpreted. An entry in the terminfo database structure must exist, ncurses provides many common descriptions stored under /usr/share/terminfo/ .

Читайте также:  Linux хостинг с ssh

First try the generic value:

If that does not work, try setting it based on your terminal. When using xterm-based terminal:

Note: /usr/share/terminfo/r/rxvt-unicode-256color is provided by rxvt-unicode-terminfo , which is installed as a dependency of rxvt-unicode . However, if you log into a server via SSH and run screen there, this terminfo file might not be available on the server. In this case it is recommended to copy /usr/share/terminfo/r/rxvt-unicode-256color on the server, it can be saved in ~/.terminfo/ .

As a last resort, try setting termcapinfo instead:

attrcolor b ".I" # allow bold colors - necessary for some reason termcapinfo xterm 'Co#256:AB=\E[48;5;%dm:AF=\E[38;5;%dm' # tell screen how to set colors. AB = background, AF=foreground defbce on # use current bg color for erased chars

Informative statusbar

The default statusbar may be a little lacking. You may find this one more helpful:

hardstatus off hardstatus alwayslastline hardstatus string '%[ %%H %][%= %%?%-Lw%?%(%%n*%f%t%?(%u)%?%)%%?%+Lw%?%?%= %][% %m-%d % %c %]'

Another possibility, taken from frodfrog’s blog [dead link 2023-04-23 ⓘ] is:

hardstatus alwayslastline '%[ %%H %][%= %%?%-Lw%?%%n*%f %t%?%(%u)%?%%+Lw%?%= %][ %Load: %l %][%%Y-%m-%d %%c:%s %]'

As of Screen v5 (master branch currently) the escape codes have changed, you could use this instead:

truecolors on hardstatus off backtick 0 5 5 "/bin/date" '+%Y-%m-%d' backtick 1 5 5 "/bin/date" '+%H:%M' hardstatus alwayslastline '%[ %H ][%%= %%?%-Lw%?%%(%%n%f%t%?(%u)%?%%)%%?%+Lw%?%? %=%][ %%%0` %%%1`% ]'

Turn welcome message off

Turn your hardstatus line into a dynamic urxvt|xterm|aterm window title

This one is pretty simple; just switch your current hardstatus line into a caption line with notification, and edit accordingly:

backtick 1 5 5 true termcapinfo rxvt* 'hs:ts=\E]2;:fs=\007:ds=\E]2;\007' hardstatus string "screen (%n: %t)" caption string "%%Y-%m-%d;%c %%-Lw%%[%n %t]%%%+Lw%1`" caption always

This will give you something like screen (0 bash) in the title of your terminal emulator. The caption supplies the date, current time, and colorizes your screen window collection.

Use X scrolling mechanism

The scroll buffer of GNU Screen can be accessed with Ctrl+a [ . However, this is very inconvenient. To use the scroll bar of e.g. xterm or Konsole, add the following line [1]:

termcapinfo xterm*|rxvt*|kterm*|Eterm* ti@:te@

Attach an existing running program to screen

If you started a program outside Screen, but now you would like it to be inside, you can use reptyr to reparent the process from its current TTY to one inside screen.

Get the PID of the process (you can use ps ax for that). Now just enter the PID as argument to reptyr inside a screen window.

Читайте также:  How to write code linux

Setting a different bash prompt while in screen

If you want a different bash prompt when in a screen session, add the following to your .bashrc [2]:

if [ -z $STY ] then PS1="YOUR REGULAR PROMPT" else PS1="YOUR SCREEN PROMPT" fi

Turn off visual bell

With this setting, Screen will not make an ugly screen flash instead of a bell sound.

Getting rid of the vertical and horizontal bars

To get rid of the vertical bars:

To hide the horizontal bar, set the back and foreground color to default (d) and display a blank (» «):

If this does not work, try caption string «% » instead. For the default caption in black and white, use caption string «%%3n %t» .

Troubleshooting

Fix for residual editor text

When you open a text editor like nano in screen and then close it, the text may stay visible in your terminal. To fix this, put the following:

Fix for Name column in windowlist only show «bash»

This article or section needs expansion.

Add following to ~/.screenrc :

See also

  • This page was last edited on 17 June 2023, at 17:59.
  • Content is available under GNU Free Documentation License 1.3 or later unless otherwise noted.
  • Privacy policy
  • About ArchWiki
  • Disclaimers

Источник

How to scroll up and down in sliced «screen» terminal

I just installed screen and like the idea to divide linux terminal into multiple pieces. But I can’t figure out one thing: How to scroll up and down, when I’m in screen . When I’m using regular linux terminal I can achieve this with Shift + Pg Up or Shift + Pg Dn `. but unfortunatelly it doesn’t work in divided terminal. That’s what I mean when saying screen and divided terminal: enter image description hereAnd that’s a regular termina (just in case): enter image description here

5 Answers 5

1. Ctrl + A , then Esc
2. After that, you should be able to move your cursor around using the arrow keys:
↑ , ↓ , PgUp , PgDn and sometimes using the mouse wheel
3. Return control: Q or Esc

@MihaiDanila: How would you «normally» use the navigation keys? The navigation keys are handled by the current foreground application. If it’s an editor, they’ll probably work. If it’s a shell, they’ll probably go back through your command history without scrolling the display.

If my pageup/pagedown keys work in a normal shell, I’d like for them to work in a shell from screen . I think that’s what I’m asking here.

in this mode selection of any text is available by typing Space or Enter key once and finish your text selection with another Space or Enter. the selection will enter into the screen based clipboard. you could paste clipboard data later using Ctrl+a then ]

Источник

Оцените статью
Adblock
detector