See device connected to wifi

How To Find Devices Connected To Your Wifi Network

As we all know, wifi is now used by many people, and almost everyone has a personal wifi connection. However, you don’t have much option to know who’s connected to your Wi-Fi network. So, we will share the easiest way to help you find devices connected to your WiFi network. Could you go through the post to learn about it?

Many people now use Wi-Fi, and almost everyone has their Wi-Fi network. However, sometimes another person knows your password and can use your wifi network, and with that, your bandwidths get divided, and your network speed gets slow. So to overcome this, we have an excellent method to help you check out all the devices currently connected to your wifi network. So have a look at the complete guide below.

Find Devices Connected To your Wifi Network

The method is straightforward and depends on an excellent tool that will work on your PC and scan all the devices connected to your wifi network. Just follow up the below steps to proceed.

Trace All The Devices Currently Connected To Your Wifi

1. First, download and install the excellent tool to scan devices on your Windows PC on a wifi network that is Wireless Network Watcher. Once you install it, you will see the screen below.

2. Now connect to the wifi network where you want to check the connected devices, launch the tool on your PC, and click on Start Scanning.

3. Once you click on Start Scanning, you need to wait for a few seconds until it finishes the search for your connected devices on your Wifi Network.

4. You will now see the list of all the devices with their IP addresses currently connected to your device.

That’s it now; you can check out the owner of that IP address and trace that person.

Using SoftPerfect WiFi Guard

SoftPerfect WiFi Guard will alert you if your network is used without your knowledge. WiFi Guard is a specialized network scanner that runs through your network at set intervals and reports immediately if it has found any new, unknown, or unrecognized connected devices that could belong to an intruder.

1. First, you must download and install SoftPerfect WiFi Guard on your computer and run it.

2. You need to go to File and select the option Settings.

3. Now enable the last three options.

5. If any unrecognized device connects with your WiFi network, it will notify you.

Using Fing IP Network Scanner

You need to download the Fing IP Network Scanner to access the superfast and reliable Network IP and Wi-Fi Analyzer on a Windows Machine. This is not a tool like SoftPerfect Wifi Guard.

This works in a command line that will give you the MAC and IP address of all connected networks. Lets’ know how to use it.

1. First, you must visit Fing.io and download and install Windows- IP Network Scanner on your Windows computer.

2. Once installed, you need to right-click on the Fing from the start menu and then select the option Run as administrator.

3. Now, you will see the screen like below; here, you need to select the option Discover. So, it would help if you typed D and then hit the Enter button.

4. Now, it will ask you to select the network you want to monitor by selecting the assigned letters. Select the web that you want to scan.

5. Now, you will be asked to select how many rounds. Select “1” to continue.

6. Now, you will be asked more questwhetherns like whether you want to discover domawhether names, whether you like the output in Log or text, which format you prefer, etc.; select all according to your wish.

7. After selecting all, you will be asked: “Do you execute it now” here, you need to Type “Y” to continue.

8. Now, it will scan for the network, and you will find the output file on the desktop.

That’s it! You can now see all the connected devices to your Wifi network.

Using Advanced IP Scanner (how to check who is connected to my wifi router)

Advanced IP Scanner is another best tool for several tasks and scanning your network for connections. This mini tool also features remote options to Wake-on-LAN and shutdown, connect via HTTP/FTP and remote control with Remote Desktop and Radmin.

1. First, download and install Advanced IP Scanner on your Windows computer.

2. After Installing the too, you will see the screen below.

3. You need to tap the Scan button to start the scanning process and wait for a few minutes until it finishes.

4. Now, it will show you the list of devices connected to your Wireless network along with your IP Address and MAC address.

To block any connected devices, you need to copy the MAC address and block it by going through your modem settings.

Using Angry IP Scanner

Well, this is another best network scanner for windows which you can use to scan devices connected to your WiFi network. However, it’s worth noting that Angry IP Scanner is Java-based, so it needs Java Runtime Environment to run. This mini tool pings every IP Address in the selected range for a response and then displays devices connected to your WiFi network.

Using Who Is On My WiFi (wireless network watcher)

Well, this is another best wireless network watcher which you can use to identify the computers connected to your network. This tool carries a neat interface and automatically warns you when unknown or unidentified connections are made. This mini tool is available in two versions, free and premium. The Free one lets you scan and find devices on your WiFi Network.

On Android & iOS

Android & iOS also have an app for scanning devices connected to WiFi. The app which we will be using is known as Fing. Fing- Network Tools is available for Android and iOS App Stores and lets users find devices connected to the current WiFi network.

Below, we will share a working method to use Fing to scan devices connected to the Wi-Fi on Android. The same process applies to iOS.

1. First of all, download & install Fing – Network Tools on your Android smartphone. You can get the app from Google Play Store.

2. Next, open the app from your App drawer, and it will ask you to grant a few permissions. Make sure to give all permissions.

3. You will now see the Fing app’s main interface. You need to tap on the Scan to scan all devices connected to the current WiFi network.

4. Wait until the app finishes the Scan. Once done, it will list all devices connected to your WiFi network.

5. If you want to gather more details about the connected device, tap on the IP Address, which will provide you with a more detailed report.

That’s it; you are done! This is how you can use Fing – Network Tools to find connected devices on Android and iOS. If you have any other doubts, then make sure to discuss them with us in the comments.

With this method, you can easily trace all the devices currently connected to your wifi and steal your wifi network. I hope you like this, do share it with others too. Leave a comment if you have any related queries with this.

Источник

How Can You See What Devices Are Connected to Your Wifi Network

Is your internet connection slower than usual? It can happen because several people might have access to your wireless network.

So, if you have some nosy neighbors and suspect them of stealing your Wi-Fi network, then this article is here to help you find out!

We will cover some easy ways to track all the devices connected to your wireless network.

How to Find My Router’s IP Address?

Before you move on to finding out devices that connect to your network, we recommend that you first figure out your router’s IP address. In most instances, you can find it in the back of the router. But, if you are still unable to track it, you can always follow these easy steps.

On Windows

1. Go to the Start icon and type in “cmd.” It will open up the Command Prompt.
2. After it opens, type in the ipconfig command and hit the return/enter key.
3. Under the Default Gateway, you can access your router’s IP address.

On MacOS

1. Go to the Wi-Fi icon on the top-right screen.
2. Click on the Network Preferences option.
3. From the left panel, select Wi-Fi.
4. Click the Advanced option from the bottom page.

Navigate to the TCP/IP tab.

You can now find your IP address in the Router section.

Use Your Wireless Router

You can easily find out devices that connect to your Wi-Fi by tracking them from your wireless router’s IP address. This method is straightforward and doesn’t require any assistance from third-party applications.

Here is a step-by-step guide on how to do it.

1. Go to your computer or mobile device and open up your web browser.
2. Type your Router’s Gateway IP address in the URL address field and hit Enter.

Once you are in the webpage portal, enter your Login credentials.

Default usernames and passwords can be Admin and password. If not, consult with your Internet Service Providers to access login.

The user interface in routers can differ from one another. Navigate to find the connected devices.

Alternatively, some Internet Service Providers also provide this access through their own router management application. You can head over and download the app. Launch it, Go to the router settings, and search for the Connected Devices option on your mobile or tablet devices.

Some apps can even have options of choosing to block devices from your wireless network. Make sure you consult your manufacturer or your Internet Service Providers for more information.

Using Command Prompt on Windows

At first glance, this method may appear cryptic for some individuals. Nonetheless, you can see exactly how many devices are connected to your wireless network.

Follow these easy steps and the commands below to access the names of the devices.

1. Navigate to the search box on the far-left corner.
2. Open up the Command Prompt by typing “cmd.”
3. Make sure you Run this program as an administrator.
4. In the command prompt box, type in a new command net view.

The process is complete! You will see a list of devices appear on the command prompt.

Note: If you have turned off your devices, they won’t be visible in the command prompt box.

Third-party Applications

If you find the above methods tedious, you can always opt-in by using third-party applications. Here is a simple process on how to use the application.

Wireless Network Watcher (For Windows Only)

Wireless Network Watcher is a small utility that scans your wireless network and displays the list of all computers and devices that connect to your network.

1. From your web browser, go to the Nirsoft website.
2. Scroll down the page and click on the Download Wireless Network Watcher.
3. Click on the Install file option and follow the instructions.
4. After the installation, navigate to the search box and type in Wireless Network Watcher.
5. The utility will scan your network automatically and display a list of connected devices.

Secure Your Wireless Network

Cracking out a Wi-Fi password can be all fun and games. However, you should be aware that your personal and confidential information could get into the wrong hands.

We recommend that you always secure your Wi-Fi network by having a strong password that is hard to decipher. You can also change the Wi-Fi password regularly for better security.

Frequently Asked Questions

How Do You Get the IP and Mac Addresses for the Connected Devices?

If you want to get the IP addresses and the mac addresses for these devices that are connected to your network, here is how to do it.

1. Open up the command prompt utility by typing in cmd.
2. Ensure you Run it as an administrator.
3. Type in the command arp -a and push enter.
4. You will see a list of IP and Mac addresses in the command prompt screen.

How Do I Identify Devices on My Network Using Mac and IP Addresses?

You can easily find out the information by pinging the device on your command prompt on your Windows Devices.

Here is a step-by-step process on how to ping the device.

1. Navigate to the Start icon and type in cmd.
2. You will see the command prompt utility and ensure you run it as an administrator.
3. Type ping -a X, where “X” is the IP address of the item which you want to find.

Note: If you have turned off your devices, they won’t ping.

What Should I Do if I Don’t Know One of the Devices?

If you don’t recognize a device connected to your network, it can because you have forgotten. But if you think it is an intruder, then the first thing you can do is change your Wi-Fi password and then reconnect all of your devices back again.

What Is a Good Example of a Strong Password?

A strong password consists of 8 or more characters. Use upper and lower case letters, numbers, symbols and have them all mix them up. Plus, we recommend that you have different passwords for every site, that way hackers can’t access all of your accounts if they get one password.

An avid writer with a curious mind to explore new things.

Источник