Is it possible to change the Terminal font?
Menu, Edit => Profile Preferences => General tab; uncheck Use the system fixed width font, and select the font you want.
For general xterm terminal, you need to create a file ~/.Xresources , and add settings to it, such as xterm*font: Sublime\ Text\ 2-12 for 12 point (this is a guess, I don’t know if it’s totally correct).
My gnome-terminal crashes when I uncheck the ‘use the system fixed width font’ checkbox. Is there a way to modify or clear this setting without going through this GUI?
Though you did not mention what font you are using or what terminal you are referring, I am giving a general answer to change font in gnome-terminal.
I am giving two ways to do this, though both are relatively close to each other
Formal way
- Open the terminal with pressing Ctrl + Alt + T .
- Then go from menu Edit → Profiles. On the profile edit window, click on the Edit button.
- Then in the General tab, uncheck Use the system fixed width font, and then select your desired font from dropdown menu
Easier way
- Open the terminal with pressing Ctrl + Alt + T .
- Right click on the terminal, from the appeared popup menu, go to Profiles → Profile Preferences
- Then in the General Tab, uncheck Use the system fixed width font, and then select your desired font from dropdown menu.
I am giving two screenshots below:
Linux console
The Linux console is a system console internal to the Linux kernel. The Linux console provides a way for the kernel and other processes to send text output to the user, and to receive text input from the user. The user typically enters text with a computer keyboard and reads the output text on a computer monitor. The Linux kernel supports virtual consoles — consoles that are logically separate, but which access the same physical keyboard and display.
This article describes the basics of the Linux console and how to configure the font display. Keyboard configuration is described in the /Keyboard configuration subpage.
Implementation
This article or section needs expansion.
Reason: In what ways is the Linux console limited compared to terminal emulators? (Discuss in Talk:Linux console)
The console, unlike most services that interact directly with users, is implemented in the kernel. This contrasts with terminal emulation software, such as Xterm, which is implemented in user space as a normal application. The console has always been part of released Linux kernels, but has undergone changes in its history, most notably the transition to using the framebuffer and support for Unicode.
Despite many improvements in the console, its full backward compatibility with legacy hardware means it is limited compared to a graphical terminal emulator.
Virtual consoles
The console is presented to the user as a series of virtual consoles. These give the impression that several independent terminals are running concurrently; each virtual console can be logged in with different users, run its own shell and have its own font settings. The virtual consoles each use a device /dev/ttyX , and you can switch between them by pressing Alt+Fx (where x is equal to the virtual console number, beginning with 1). The device /dev/console is automatically mapped to the active virtual console.
Text mode
Since Linux originally began as a kernel for PC hardware, the console was developed using standard IBM CGA/EGA/VGA graphics, which all PCs supported at the time. The graphics operated in VGA text mode, which provides a simple 80×25 character display with 16 colours. This legacy mode is similar to the capabilities of dedicated text terminals, such as the DEC VT100 series. It is still possible to boot in text mode (with vga=0 nomodeset ) if the system hardware supports it, but almost all modern distributions (including Arch Linux) use the framebuffer console instead.
Framebuffer console
As Linux was ported to other non-PC architectures, a better solution was required, since other architectures do not use VGA-compatible graphics adapters, and may not support text modes at all. The framebuffer console was implemented to provide a standard console across all platforms, and so presents the same VGA-style interface regardless of the underlying graphics hardware. As such, the Linux console is not a terminal emulator, but a terminal in its own right. It uses the terminal type linux , and is largely compatible with VT100.
Keyboard shortcuts
| Keyboard Shortcut | Description |
|---|---|
| Ctrl+Alt+Del | Reboots the system (specified by the symlink /usr/lib/systemd/system/ctrl-alt-del.target ) |
| Alt+F1 , F2 , F3 , . | Switch to n-th virtual console |
| Alt+Left | Switch to previous virtual console |
| Alt+Right | Switch to next virtual console |
| Scroll Lock | When Scroll Lock is activated, input/output is locked |
| Ctrl+c | Kills current task |
| Ctrl+d | Inserts an EOF |
| Ctrl+z | Pauses current Task |
Fonts
Note: This section is about the Linux console. For alternative console solutions offering more features (full Unicode fonts, modern graphics adapters etc.), see KMSCON or similar projects.
The Linux console uses UTF-8 encoding by default, but because the standard VGA-compatible framebuffer is used, a console font is limited to either a standard 256, or 512 glyphs. If the font has more than 256 glyphs, the number of colours is reduced from 16 to 8. In order to assign correct symbol to be displayed to the given Unicode value, a special translation map, often called unimap, is needed. Nowadays, most of the console fonts have the unimap built-in; historically, it had to be loaded separately.
By default, the virtual console uses the kernel built-in font with a CP437 character set[1], but this can be easily changed. The kernel offers about 15 built in fonts to choose from, from which the officially supported kernels provide two: VGA 8×16 font ( CONFIG_FONT_8x16 ) and Terminus 16×32 font ( CONFIG_FONT_TER16x32 ). The kernel chooses the one to use based on its evaluation of the screen resolution. Another builtin font can be forced upon by kernel parameters boot parameter setting such as fbcon=font:TER16x32 .
The kbd package provides tools to override the kernel decision for virtual console font and font mapping. Available fonts are provided in the /usr/share/kbd/consolefonts/ directory; those ending with .psfu or .psfu.gz have a Unicode translation map built-in.
Keymaps, the connection between the key pressed and the character used by the computer, are found in the subdirectories of /usr/share/kbd/keymaps/ ; see /Keyboard configuration for details.
Note: Replacing the font can cause issues with programs that expect a standard VGA-style font, such as those using line drawing graphics.
Tip: For European based languages written in Latin/Greek letters, you can use the eurlatgr font. It includes a broad range of Latin/Greek letter variations as well as special characters [2].
Preview and temporary changes
shows a table of glyphs or letters of a font.
setfont temporarily change the font if passed a font name (in /usr/share/kbd/consolefonts/ ) such as
Font names are case-sensitive. With no parameter, setfont returns the console to the default font.
So to have a small 8×8 font, with that font installed like seen below, use e.g.:
$ setfont -h8 /usr/share/kbd/consolefonts/drdos8x8.psfu.gz
To have a bigger font, the Terminus font ( terminus-font ) is available in many sizes, such as ter-132b which is large.
Note: setfont only works on the console currently being used. Any other consoles, active or inactive, remain unaffected.
Persistent configuration
The FONT variable in /etc/vconsole.conf is used to set the font at boot, persistently for all consoles. See vconsole.conf(5) for details.
For displaying characters such as Č, ž, đ, š or Ł, ę, ą, ś using the font lat2-16.psfu.gz :
It means that second part of ISO/IEC 8859 characters are used with size 16. You can change font size using other values (e.g. lat2-08 ). For the regions determined by 8859 specification, look at the Wikipedia:ISO/IEC 8859#The parts of ISO/IEC 8859.
Since mkinitcpio v33, the font specified in /etc/vconsole.conf gets automatically loaded during early userspace by default via the consolefont hook, which adds the font to the initramfs. See Mkinitcpio#HOOKS for more information.
You may also need to restart systemd-vconsole-setup.service after changing /etc/vconsole.conf .
If the fonts appear to not change on boot, or change only temporarily, it is most likely that they got reset when graphics driver was initialized and console was switched to framebuffer. By default, all in-tree kernel drivers are loaded early, NVIDIA users should see NVIDIA#Early loading to load their graphics driver before /etc/vconsole.conf is applied.
HiDPI
Audible tones
See also
How to Change Console Fonts in Ubuntu Server
By default, Ubuntu server software is designed to run without a graphical environment. Therefore, a fresh installation of Ubuntu server can only be managed via a console (the black background and white text, and a command prompt – after successful login), but for some reason you might like to change the font on your console for better appearance.
In this article, we will show you how to change console fonts and font size on Ubuntu server.
The file console-setup specifies the encoding and the font as well as font size to be implemented by the setupcon program. This program sets up the font and keyboard on the console of the Ubuntu server.
The default font and font size on Ubuntu server console is normally VGA and 8X16 respectively, which does not really look nice (especially if you have developed a strong liking for gorgeous looking fonts on the terminal, like we have), as shown in the following screenshot.
To change Ubuntu server console font, run the following command to reconfigure the console-setup file, this requires root privileges, so use the sudo command as shown.
$ sudo dpkg-reconfigure console-setup
Then choose the encoding to use on the console, you may leave the default, and press [Enter].
Next, choose the character set to support, you may leave the default, and press [Enter] to continue.
In this step, choose the font you want to use, for example we will use Fixed, so we will select it and press [Enter].
Finally, choose the font size, and we have selected 8X18. Then press [Enter]. Your console font will now change and the system will apply the recent changes. Once everything is done, your command prompt should appear with text formated in the new font.
The following screenshot shows the Ubuntu server console with the Fixed font type and font size of 8×18.
For more information, see the console-setup and setupcon man pages.
$ man console-setup $ man setupcon
That’s it! In this article, we have explained how to change console font and font size on Ubuntu server. To ask any questions, use the comment form below.