Setting quotas in linux

How to Set Filesystem (Disk) Quotas on Ubuntu

Filesystem quota is a standard built-in feature found in Linux Kernel. Quotas determine the amount of space a file should have to support user activities. The disk quotas also limit the number of files a user can create on the system.

Filesystems that support the quota system include xfs, ext2, ext4, and ext3 to mention a few. The assignment of quotas is specific to the filesystem and for each user. This article bears all you need to know about working with the quota filesystem in a multi-user Ubuntu 18.04 environment.

What You Need

The assumption here is that you are using Ubuntu 18.04 system with a user (tecmint) given sudo rights. The ideas shared here can work on any Linux Distros as long as you use the right implementation technique.

Step 1: Installing Quota in Ubuntu

For quotas to be ready and usable, install the quota command-line tool using the apt command, but before that you need to update the system software packages.

Now use the following command to install quota package on Ubuntu.

Press Y , and then ENTER for the installation process to start.

Confirm the installation version by running the command below. Your version number may differ from what you see below.

Step 2: Installing the Module for Quota Kernel

Those running a cloud-based virtual system, the default Ubuntu installation may be missing the kernel modules that support the use of quota. You must confirm using the find tool and ensure that the two modules, quota_v1, and quota _v2, are inside the /lib/modules directory.

$ find /lib/modules/`uname -r` -type f -name '*quota_v*.ko*'

This should be the outcome of the above command.

Do not worry about the kernel versions as long as the two modules are present. If not found, use the following command to install quota kernel modules as shown.

$ sudo apt install linux-image-extra-virtual

You will get the right modules that you need for quota implementation.

Step 3: Updating Filesystem Mount Options

For the quotas to be active on a specific system, it must be mounted with related quota options. You can do this by updating the file system entry found in the /etc/fstab file.

You should be ready to edit the file appropriately. The difference between a fstab file and a desktop one is the difference in how the / or root file system represents the entire disk space. Replace the line (/) that points to the root system using the lines below.

LABEL=cloudimg-rootfs / ext4 usrquota,grpquota 0 0

The lines will change to allow the userquota and grpquota to be accessible. You can leave one that is not part of the final configuration. If the fstab had some options, add the new options at the end of the line. As you do the appending, separate the new items with a comma but with no spacing between them.

Remount the filesystem for the changes to take effect.

NOTE: confirm no spaces exist between the options in the /etc/fstab to avoid such errors.

mount: /etc/fstab: parse error

The verification of the use of new options when mounting the filesystem in the /proc/mounts file is done through grep. The command shows the root file system entry in the file.

$ sudo cat /proc/mounts | grep ' / '

From the output, you can see the two options that we set up. It is time to turn on the quota system.

Step 4: Enabling Disk Quotas on Ubuntu

First, you must run the quotacheck command.

The command creates two files a quota user and a quota group that have information on the limit and usage of the filesystem. These files have to be present before you start using the quota.

Here is a definition of the parameters:

• -u : symbolizes a user-based quota file will be created.
• -g : indicates that a group-based quota file will be created.
• -m: disables remounting of the file system as a read-only while at the same time gives accurate results in an environment where the user keeps saving files. The m option is not mandatory during setup.

When there is no need to enable the use of quotas based on user or group, there is no need to run the quotacheck option. Confirm this by listing the root directory using the ls command.

Sample Output

aquota.group bin dev home initrd.img.old lib64 media opt root sbin srv tmp var vmlinuz.old aquota.user boot etc initrd.img lib lost+found mnt proc run snap sys usr vmlinuz

Failure to include the u and g parameters in the quotacheck command, the corresponding files will be missing.

Now we’re ready to turn on quota on the root (/) filesystem with the following command.

Step 5: Configure Quotas for a Single User

We can use the edquota and setquota commands to set them for users or groups.

Using edquota

The edquota commands edits quotas, for instance, we can edit a quota belonging to tecmint user using:

Using the -u option specifies that the quota belongs to a user. Use the -g option if you need to edit a quota that belongs to a group. The command will open a file using your choice of text editor.

The output lists the username, uid, the filesystem with active quotas, and the usage of blocks and inodes. A quota-based on inodes limits the number of files and directories users can create irrespective of the size they use on the disk. Most Admins prefer the block-based quota that controls the disk space.

NOTE: the use of blocks does not show how it can change depending on different factors such as the command-line tool reporting them. Within the contexts quotas on Ubuntu, we can assume that a single block is the same as one kilobyte of disk space.

Using the command line above, the user will use 2032 blocks, which is the same as 2032KB of space on the /dev/sda1. The 0 value disables both soft and hard limits.

Every quota set allows setting up the soft and hard limit. A user who goes above the soft limit may be over her quota, but not barred from using more spaces or inodes. The user in such a case has seven days to redeem their soft limit space, failing to do that makes it difficult to save or create files.

A hard limit means the creation of new blocks or inodes stops the moment you hit the limit. Users will report seeing warnings or errors while performing regular tasks.

We can update tecmint’s block quota to have a soft limit of 100MB and 110MB for the hard limit.

After editing, close the file and check the new user quota limit settings using the quota command.

NOTE: giving your users an opportunity to analyze their quotas without invoking the sudo command, they must be given access to read quota files during the creation phase in step four. One easy way of doing so is to create a user’s group and give the group access so you can add users to it.

Using setquota

setquota updates the quota information using a single command without any interactive setup. The command requires the username and setting both the soft and hard limits the block and inode will use. You will also need to declare the files system the quota will use.

$ sudo setquota -u tecmint 200M 220M 0 0 /

The command doubles the block-based quota limits to 200 megabytes and 220 megabytes. The two 0 0 indicate that both the hard and soft limits are not set, it is a requirement even when there is no need of setting inode-based quotas.

As usual, use the quota command to verify your progress.

Step 6: Generating Quota Reports

Generating a quota report, it must indicate usage from all users. The command repquota is used.

The output above is a report on the / root filesystem. The -s instructs repquota to give results in human-readable format.

The default Block grace time is 7days. The grace column alerts the user on the number of days before the denial of access to the resource disk.

Step 7: Set the Configuration Grace Periods

The grace period is that time a user gets permission to work beyond the default timing.

$ sudo setquota -t 864000 864000 /

The command instructs the block and inode to have a grace period of 864000 seconds an equivalent of 10 days. The setting will affect all users, therefore, values need to be set even when there will be no use of blocks and inodes. The time value must be in seconds.

Confirm the changes and see if it took effect using the command:

Common Errors Messages

quotaon: cannot find //aquota.group on /dev/vda1 [/] quotaon: cannot find //aquota.user on /dev/vda1 [/]

The above error is common if you try to turn on quotas using the command qoutaon before an attempt to check the status of a quota using the command quotacheck.

quotaon: using //aquota.group on /dev/vda1 [/]: No such process quotaon: Quota format not supported in kernel. quotaon: using //aquota.user on /dev/vda1 [/]: No such process quotaon: Quota format not supported in kernel.

This error tells the Administrator that the kernel does not support or you could have the wrong version on the machine (we have quota_v1 and quota_v2). For Ubuntu, such errors are common on a cloud-based virtual server.

Fix the error by installing the Linux-image-extra-virtual package using apt command.

quota: Cannot open quotafile //aquota.user: Permission denied quota: Cannot open quotafile //aquota.user: Permission denied quota: Cannot open quotafile //quota.user: No such file or directory

The error is notable when the current user does not have permission to read quota files. As an Administrator, you only need to make the correct permission changes or use sudo when you need to access files in a quota system or file.

Conclusion

At the top of the article, we started with quota command-line tools and the verification of the kernel version and went further to explains how to set up a block-based quota for a single user and how to generate a report on a filesystem quota usage.

The article also covers common errors and how to avoid them using an extra package or verifying the kernel version on your system.

Источник