Setup linux server ubuntu

Install Ubuntu Server

Ubuntu Server is a variant of the standard Ubuntu you already know, tailored for networks and services. It’s just as capable of running a simple file server as it is operating within a 50,000 node cloud.

Unlike the installation of Ubuntu Desktop, Ubuntu Server does not include a graphical installation program. Instead, it uses a text menu-based process. If you’d rather install the desktop version, take a look at our Install Ubuntu desktop tutorial.

This guide will provide an overview of the installation from either a DVD or a USB flash drive.

For a more detailed guide on Ubuntu Server’s capabilities and its configuration, take a look at our the Community Ubuntu Server documentation.

2. Requirements

You’ll need to consider the following before starting the installation:

• Ensure you have at least 2GB of free storage space.
• Have access to either a DVD or a USB flash drive containing the version of Ubuntu Server you want to install.
• If you’re going to install Ubuntu Server alongside data you wish to keep, ensure you have a recent backup.

See the server guide pages for more specific details on hardware requirements. We also have several tutorials that explain how to create an Ubuntu DVD or USB flash drive.

3. Boot from install media

To trigger the installation process, perform the following:

1. Put the Ubuntu DVD into your DVD drive (or insert the USB stick or other install media).
2. Restart your computer.

After a few moments, you should see messages like those shown below on the screen…

Most computers will automatically boot from USB or DVD, though in some cases this is disabled to improve boot times. If you don’t see the boot message and the “Welcome” screen which should appear after it, you will need to set your computer to boot from the install media.

There should be an on-screen message when the computer starts telling you what key to press for settings or a boot menu. Depending on the manufacturer, this could be Escape , F2 , F10 or F12 . Simply restart your computer and hold down this key until the boot menu appears, then select the drive with the Ubuntu install media.

4. Choose your language

After the boot messages appear, a ‘Language’ menu will be displayed.

As the message suggests, use the Up , Down and Enter keys to navigate through the menu and select the language you wish to use.

5. Choose the correct keyboard layout

Before you need to type anything in, the installer will next display a menu asking you to select your keyboard layout and, if applicable, the variant.

If you don’t know which particular variant you want, just go with the default — when Ubuntu Server has been installed you can test and change your preferences more easily if necessary.

6. Choose your install

Now we are ready to select what you want to install. There are three options in the menu:

The bottom two options are used for installing specific components of a Metal As A Service (MAAS) install. If you are installing MAAS, you should check out the MAAS documentation for more information on this! The rest of this tutorial assumes you select the first option, Install Ubuntu .

7. Networking

The installer will automatically detect and try to configure any network connections via DHCP.

This is usually automatic and you will not have to enter anything on this screen, it is for information only.

If no network is found, the installer can continue anyway, it just won’t be able to check for updates. You can always configure networking after installation.

8. Configure storage

The next step is to configure storage. The recommended install is to have an entire disk or partition set aside for running Ubuntu.

If you need to set up a more complicated system, the manual option will allow you to select and reorganise partitions on any connected drives.

Note that Ubuntu no longer requires a separate partition for swap space, nor will the automated install create one.

9. Select a device

This menu will allow you to select a disk from the ones detected on the system.

To help identification, the drives will be listed using their system ID. Use the arrow keys and enter to select the disk you wish to use.

10. Confirm partitions

With the target drive selected, the installer will calculate what partitions to create and present this information…

If this isn’t what you expected to see (e.g., you have selected the wrong drive), you should use the arrow keys and enter to select Back from the options at the bottom of the screen. This will take you back to the previous menu where you can select a different drive.

It is also possible to manually change the partitions here, by selecting Edit Partitions . Obviously you should only select this if you are familiar with how partitions work.

When you are happy with the disk layout displayed, select Done to continue.

11. Confirm changes

Before the installer makes any destructive changes, it will show this final confirmation step. Double check that everything looks good here and you aren’t about to reformat the wrong device!

There is no “Undo” for this step, once you confirm the changes, the indicated devices will be overwritten and any contents may be lost

12. Set up a Profile

The software is now being installed on the disk, but there is some more information the installer needs. Ubuntu Server needs to have at least one known user for the system, and a hostname. The user also needs a password.

There is also a field for importing SSH keys, either from Launchpad, Ubuntu One or Github. You simply need to enter the username and the installer will fetch the relevant keys and install them on the system ready for use (e.g. secure SSH login to the server).

13. Install software

Once you have finished entering the required information, the screen will now show the progress of the installer. Ubuntu Server now installs a concise set of useful software required for servers. This cuts down on the install and setup time dramatically. Of course, after the install is finished, you can install any additional software you may need.

14. Installation complete

When the install is complete, you will see a message like this on the screen.

Remember to remove the install media, and then press enter to reboot and start the server. Welcome to Ubuntu!

15. What next?

With Ubuntu Server installed, you can now carry on and build that file-server or multi-node cluster we mentioned!

If you are new to Ubuntu Server, we’d recommend reading the Server Guide.

You can also check out the latest on Ubuntu Server, and what others are using it for on the Ubuntu Server pages.

Finding help

The Ubuntu community, for both desktop and server, is one of the friendliest and most well populated you can find. That means if you get stuck, someone has probably already seen and solved the same problem.

Try asking for help in one of the following places:

Alternatively, if you need commercial support for your server deployments, take a look at Ubuntu Advantage.

Источник

How to operate the Server installer

This document explains how to use the installer in general terms. For a step-by-step guide through the screens of the installer, you can use our screen-by-screen reference guide.

Get the installer

Installer images are made (approximately) daily and are available from https://cdimage.ubuntu.com/ubuntu-server/daily-live/current/. These are not tested as extensively as the images from release day, but they contain the latest packages and installer, so fewer updates will be required during or after installation.

You can download the server installer for amd64 from https://ubuntu.com/download/server and other architectures from http://cdimage.ubuntu.com/releases/20.04/release/.

Installer UI navigation

In general, the installer can be used with the up and down arrows and space or Enter keys and a little typing.

Tab and Shift + Tab move the focus down and up respectively. Home / End / Page Up / Page Down can be used to navigate through long lists more quickly in the usual way.

Running the installer over serial

By default, the installer runs on the first virtual terminal, tty1 . This is what is displayed on any connected monitor by default. However, servers do not always have a monitor. Some out-of-band management systems provide a remote virtual terminal, but some times it is necessary to run the installer on the serial port. To do this, the kernel command line needs to have an appropriate console specified on it – a common value is console=ttyS0 but this is not something that can be generically documented.

When running on serial, the installer starts in a basic mode that does using only the ASCII character set and black and white colours. If you are connecting from a terminal emulator such as gnome-terminal that supports Unicode and rich colours you can switch to “rich mode” which uses Unicode, colours and supports many languages.

Connecting to the installer over SSH

If the only available terminal is very basic, an alternative is to connect via SSH. If the network is up by the time the installer starts, instructions are offered on the initial screen in basic mode. Otherwise, instructions are available from the help menu once networking is configured.

In addition, connecting via SSH is assumed to be capable of displaying all Unicode characters, enabling more translations to be used than can be displayed on a virtual terminal.

Help menu

The help menu is always in the top right of the screen. It contains help – both general and for the currently displayed screen – and some general actions.

Switching to a shell prompt

You can switch to a shell at any time by selecting “Enter shell” from the help menu, or pressing Control + Z or F2 .

If you are accessing the installer via tty1 , you can also access a shell by switching to a different virtual terminal ( Control + Alt + arrow, or Control + Alt + number keys, move between virtual terminals).

Global keys

There are some global keys you can press at any time:

Key	Action
ESC	Go back
F1	Open help menu
Control + Z , F2	Switch to shell
Control + L , F3	Redraw screen
Control + T , F4	Toggle rich mode (colour, Unicode) on and off

Источник

Ubuntu Server tutorials

This section of our documentation contains step-by-step tutorials to help outline what Ubuntu Server is capable of while helping you achieve specific aims.

We hope our tutorials make as few assumptions as possible and are broadly accessible to anyone with an interest in Ubuntu Server. They should also be a good place to start learning about Ubuntu Server in general, how it works, and what it’s capable of.

Core tutorial

In our core tutorial, you will learn how to set up an Ubuntu Server; from installing using a bootable USB device, to navigating the Server installer menu.

Next steps

Once your Ubuntu Server is up and running, you may be interested in this collection of related tutorials and topics that will help you learn more about how it works and what’s available to you. These pages can be viewed in any order.

If you have a specific goal, but are already familiar with Ubuntu Server, take a look at our How-to guides. These have more in-depth detail and can be applied to a broader set of applications.

Take a look at our Reference section when you need to determine what commands are available, and how to interact with various tools.

Finally, for a better understanding of how Ubuntu Server works and how it can be used and configured, our Explanation section enables you to expand your knowledge of the operating system and additional software.

Источник