Sql install kali linux

How To Install sql on Kali Linux

In this guide, we’ll discuss How To Install sql on Kali Linux. Also, we will demonstrate how to uninstall and update sql .

One-liner install command

For those in a hurry, here’s a one-line installation command:

sudo apt-get update && sudo apt -y install parallel

But if you are interested in the detailed steps with descriptions, the following information is for you.

What is sql and what are the ways to install it?

Short description: build and execute command lines from standard input in parallel

Before beginning this tutorial, you will need access to a server or computer running Kali Linux. This guide was written specifically with a server running Kali Linux in mind, although it should also work on older, supported versions of the operating system.

Also, make sure you are running a regular, non-root user with sudo privileges configured on your server. When you have an account available, log in as your non-root user to begin.

There are several ways to install sql on Kali Linux. You can use (links are clickable):

In the following sections, we will describe each method in detail. You can choose one of them or refer to the recommended one.

Install sql using apt-get

First, update apt database with apt-get using the following command.

After updating apt-get database, You can install sql using apt by running the following command:

sudo apt -y install parallel

Install sql using apt

Because sql is available in Kali Linux’s default repositories, it is possible to install it from these repositories using the apt packaging system.

To begin, update apt database with apt using the following command.

After updating apt database, You can install sql using apt by running the following command:

sudo apt -y install parallel

Install sql using aptitude

If you want to follow this method, you might need to install aptitude first since aptitude is usually not installed by default on Kali Linux. Update apt database with aptitude using the following command.

After updating aptitude database, You can install sql by running the following command:

sudo aptitude -y install parallel

How to upgrade (update) a single package sql using apt-get?

First, you will need to update packages index. Run update command as usual:

Next, to upgrade only the sql, e.g. single package, you should use the following format with the apt-get command/apt command:

sudo apt-get --only-upgrade install parallel

Note that this command will not install any new packages! If you wish to install the package if it doesn’t exist you may leave out —only-upgrade part.

It’s Good to Know:

sudo apt-get install parallel

This will upgrade the package even if is already installed.

How To Uninstall sql from Kali Linux

To uninstall only the sql package you can execute the following command:

sudo apt-get remove parallel

Uninstall sql and all its dependencies

To uninstall sql and its dependencies that are no longer needed by Kali Linux, you can use the command below:

sudo apt-get -y autoremove parallel

Remove sql with all configurations and data

To remove sql configuration and data from your system you can run the following purge command:

sudo apt-get -y purge parallel

Remove sql completely (configurations, data and all of its dependencies)

And lastly, you can run the next command to remove absolutely everything related to sql package, e.g.: configurations, data and all of its dependencies. Just use this command:

sudo apt-get -y autoremove --purge parallel

Extra info and code examples

GNU Parallel is a shell tool for executing jobs in parallel using one or more machines. A job is typically a single command or a small script that has to be run for each of the lines in the input. The typical input is a list of files, a list of hosts, a list of users, or a list of tables. If you use xargs today you will find GNU Parallel very easy to use. If you write loops in shell, you will find GNU Parallel may be able to replace most of the loops and make them run faster by running jobs in parallel. If you use ppss or pexec you will find GNU Parallel will often make the command easier to read. GNU Parallel also makes sure output from the commands is the same output as you would get had you run the commands sequentially. This makes it possible to use output from GNU Parallel as input for other programs.

• Maintainer: Rogério Brito
• Sources url:https://www.gnu.org/software/parallel/
• Section/Category:utils

Conclusion

You now have a full guide on how to install sql using apt, apt-get and aptitude tools. Also, we showed how to update as a single package and different ways to uninstall the sql from Kali Linux.

Источник

Как установить MySQL 8.0 на Kali Linux

MySQL 8.0 — это последняя стабильная версия системы управления реляционными базами данных MySQL. MySQL — это бесплатная система управления базами данных (СУБД), в которой используется язык структурированных запросов (SQL). MySQL разработан, чтобы быть стабильным, надежным и гибким в использовании.

Мы будем использовать доступный репозиторий MySQL APT для установки MySQL 8.0 на Kali Linux. Убедитесь, что этот репозиторий добавлен в вашу систему, выполнив команду ниже.

sudo apt update sudo apt install -y wget wget https://dev.mysql.com/get/mysql-apt-config_0.8.15-1_all.deb sudo dpkg -i mysql-apt-config_0.8.15-1_all.deb

Поскольку Kali Linux не является официально поддерживаемой версией, выберите выпуск Ubuntu Bionic.

Выберите и нажмите клавишу , чтобы подтвердить установку версии.

sudo apt update sudo apt install mysql-community-server

sudo systemctl enable --now mysql

$ systemctl status mysql ● mysql.service - MySQL Community Server Loaded: loaded (/lib/systemd/system/mysql.service; enabled; vendor preset: enabled) Active: active (running) since Sat 2020-03-21 11:15:30 UTC; 2min 31s ago Docs: man:mysqld(8) http://dev.mysql.com/doc/refman/en/using-systemd.html Main PID: 2188 (mysqld) Status: "Server is operational" Tasks: 38 (limit: 2377) Memory: 386.5M CGroup: /system.slice/mysql.service └─2188 /usr/sbin/mysqld Mar 21 11:15:29 deb10 systemd[1]: Starting MySQL Community Server… Mar 21 11:15:30 deb10 systemd[1]: Started MySQL Community Server.

$ sudo mysql -u root -p Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 8 Server version: 8.0.19 MySQL Community Server - GPL Copyright (c) 2000, 2020, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> mysql> CREATE DATABASE test_db; Query OK, 1 row affected (0.01 sec) mysql> SHOW DATABASES; +--------------------+ | Database | +--------------------+ | information_schema | | mysql | | performance_schema | | sys | | test_db | +--------------------+ 5 rows in set (0.01 sec) mysql> EXIT Bye

sudo apt update sudo apt install -y wget wget https://dev.mysql.com/get/mysql-apt-config_0.8.15-1_all.deb sudo dpkg -i mysql-apt-config_0.8.15-1_all.deb

sudo systemctl enable --now mysql

$ systemctl status mysql ● mysql.service - MySQL Community Server Loaded: loaded (/lib/systemd/system/mysql.service; enabled; vendor preset: enabled) Active: active (running) since Sat 2020-03-21 11:15:30 UTC; 2min 31s ago Docs: man:mysqld(8) http://dev.mysql.com/doc/refman/en/using-systemd.html Main PID: 2188 (mysqld) Status: "Server is operational" Tasks: 38 (limit: 2377) Memory: 386.5M CGroup: /system.slice/mysql.service └─2188 /usr/sbin/mysqld Mar 21 11:15:29 deb10 systemd[1]: Starting MySQL Community Server… Mar 21 11:15:30 deb10 systemd[1]: Started MySQL Community Server.

$ sudo mysql -u root -p Welcome to the MySQL monitor. Commands end with ; or g. Your MySQL connection id is 8 Server version: 8.0.19 MySQL Community Server - GPL Copyright (c) 2000, 2020, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or 'h' for help. Type 'c' to clear the current input statement. mysql> mysql> CREATE DATABASE test_db; Query OK, 1 row affected (0.01 sec) mysql> SHOW DATABASES; -------------------- | Database | -------------------- | information_schema | | mysql | | performance_schema | | sys | | test_db | -------------------- 5 rows in set (0.01 sec) mysql> EXIT Bye