Sunhans wifi signal booster
Sunhans’s family of WiFi boosters is designed for use in mobile and/or mesh wireless networking applications. Designed for bi-directional signal amplification, In contrast, traditional analog amplifier technologies can go into saturation or reduce transmit power as input signal fluctuates, negatively impacting signal quality and network performance. Can be used any 5GHz antenna that implements an SMA-Male connector. The small footprint and low profile design makes it an ideal solution for mounting on vehicles or in other space constrained applications.
The Sunhans’s 5,8GHz WiFi booster efficiently increases signal reach of any antenna by up to 200%-400%.
The Sunhans’s 5,8GHz WiFi booster are been used to increase the power and/or the signal for different products like:
Operating range : 5000~5875MHz
Channel width: 20Mhz&40Mhz&80Mhz
Supported standards: IEEE 802.11a/n, 2Tx2R
Operation mode: Bi-directional, half-duplex, time division duplex, MIMO
Connector type: To radio SMA female (hole inside). To antenna RP-SMA male (pin inside)
Output power: 1000mW (30dBm)
Noise figure: ≤3.5dB typical
Frequency response: ±1dB over operating range
Power adapter: 12V/2A DC, 100~240V
Operating temperature: -20°C to +70°C
Operating humidity: Up to 90% relative humidity
LED light: Power status LED and activity status LED
Booster size: 8.5 x 7 x 2cm
Package size: 21.3 x 15 x 6cm
2 x RG316 cable with SMA connectors (20cm)
Sunhans wifi signal booster
SH24Go10W 2.4GHz 10W 40dBm WiFi Signal Booster O utdoor
Model: SH24G o 10W
P/N: 24G o 1 0W01 4
Barcode: 6958176013 50
2.4GHz, Max. 10W big output power;
Aluminum-alloy case by CNC, anti-interference;
For supermarkets, parking spaces, office, .
Sunhans’s family of WiFi boosters is designed for use in mobile and/or mesh wireless networking applications. Designed for bi-directional signal amplification, In contrast, traditional analog amplifier technologies can go into saturation or reduce transmit power as input signal fluctuates, negatively impacting signal quality and network performance. Can be used any 2,4GHz antenna that implements an SMA-Male connector. The small footprint and low profile design makes it an ideal solution for mounting on vehicles or in other space constrained applications.
The Sunhans’s 2,4GHz WiFi booster efficiently increases signal reach of any antenna by up to 200%-400%.
The Sunhans’s 2,4GHz WiFi booster are been used to increase the power and/or the signal for different products and aplications like:
Sunhans wifi signal booster
SH24Go20W 2.4G H z 20W 43dBm WiFi Signal Booster O utdoor
Model: SH24G o 20W
P/N: 24G o 20W01 4
2.4GHz, Max. 20W big output power;
Aluminum-alloy case by CNC, anti-interference;
For supermarkets, parking spaces, office, .
Sunhans’s family of WiFi boosters is designed for use in mobile and/or mesh wireless networking applications. Designed for bi-directional signal amplification, In contrast, traditional analog amplifier technologies can go into saturation or reduce transmit power as input signal fluctuates, negatively impacting signal quality and network performance. Can be used any 2,4GHz antenna that implements an SMA-Male connector. The small footprint and low profile design makes it an ideal solution for mounting on vehicles or in other space constrained applications.
The Sunhans’s 2,4GHz WiFi booster efficiently increases signal reach of any antenna by up to 200%-400%.
The Sunhans’s 2,4GHz WiFi booster are been used to increase the power and/or the signal for different products and aplications like:
Sunhans wifi signal booster
5.0-5.8GHz 4000mW 36dBm WiFi Signal Booster
Model: SH58Gi4000 P
5.8GHz, Max. 4000mW output power;
Aluminum-alloy case by CNC, anti-interference;
For house, office, UAV, IP cameras, RC equipment.
Sunhans’s family of WiFi boosters is designed for use in mobile and/or mesh wireless networking applications. Designed for bi-directional signal amplification, In contrast, traditional analog amplifier technologies can go into saturation or reduce transmit power as input signal fluctuates, negatively impacting signal quality and network performance. Can be used any 5GHz antenna that implements an SMA-Male connector. The small footprint and low profile design makes it an ideal solution for mounting on vehicles or in other space constrained applications.
The Sunhans’s 5,8GHz WiFi booster efficiently increases signal reach of any antenna by up to 200%-400%.
The Sunhans’s 5,8GHz WiFi booster are been used to increase the power and/or the signal for different products like:
Operating range : 5000~5875MHz
Channel width: 20Mhz&40Mhz&80Mhz
Supported standards: IEEE 802.11a/n
Operation mode: Bi-directional, half-duplex, time division duplex
Connector type: To radio SMA female (hole inside). To antenna RP-SMA male (pin inside)
Output power: 4000mW (36dBm)
Noise figure: ≤3.5dB typical
Frequency response: ±1dBoveroperatingrange
Power adapter: 12V/2A DC, 100~240V
Operating temperature: -20°C to +70°C
Operating humidity: Up to 75% relative humidity
LED light: Power status LED and activity status LED
Booster weight: 135g
Booster size: 9.7 x 6.4 x 1.7cm
Package weight: 420g
Package size: 21.3 x 13.5 x 5cm
Sunhans wifi signal booster
2.4G H z 4 W 36dBm WiFi Signal Booster
Model: SH24Gi4000 P
Barcode: 6958917600834
2.4GHz, Max. 4 000mW output power;
Aluminum-alloy case by CNC, anti-interference;
For house, office, IP cameras, supermarkets.
Sunhans’s family of WiFi boosters is designed for use in mobile and/or mesh wireless networking applications. Designed for bi-directional signal amplification, In contrast, traditional analog amplifier technologies can go into saturation or reduce transmit power as input signal fluctuates, negatively impacting signal quality and network performance. Can be used any 2,4GHz antenna that implements an SMA-Male connector. The small footprint and low profile design makes it an ideal solution for mounting on vehicles or in other space constrained applications.
The Sunhans’s 2,4GHz WiFi booster efficiently increases signal reach of any antenna by up to 200%-400%.
The Sunhans’s 2,4GHz WiFi booster are been used to increase the power and/or the signal for different products and aplications like: