Sync this iphone with wifi

How to Sync iPhone Over Wi-Fi

Sam Costello has been writing about tech since 2000. His writing has appeared in publications such as CNN.com, PC World, InfoWord, and many others.

Jonathan Fisher is a CompTIA certified technologist with more than 6 years’ experience writing for publications like TechNorms and Help Desk Geek.

What To Know

• Plug the phone in via USB. Select the iPhone icon in iTunes. Under Options >Sync. over Wi-Fi >Apply >Done.
• Alternatively, on the iPhone, go to Settings >General >iTunes Wi-Fi Sync >Sync Now.

This article explains how to sync your iPhone with your computer over Wi-Fi. Information in this article applies to iPhones and other iOS devices running iOS 5 or higher and a computer running iTunes 10.6 or higher.

Sync iPhone With Computer Over Wi-Fi Setup

To sync your iPhone wirelessly, you need to use a cable—at least once—to change a setting in iTunes to enable wireless syncing for your phone. Do this one time, and you can go wireless every time afterward.

1. Plug the iPhone or iPod touch into a computer with USB in the usual wired way that you’d sync your device. If iTunes doesn’t open automatically, open it.

In iTunes, select the iPhone icon to go to the iPhone Summary screen. (It’s possible that iTunes will already be on the screen.)

In the Options section select the Sync with this iPhone over Wi-Fi check box.

Select Apply, then select Done to save the change.

Press the phone icon at the top of the screen. To eject the iPhone, go to the left panel and select the up arrow next to the iPhone icon. Then, unplug the iPhone from the computer.

How to Sync Your iPhone Over Wi-Fi

After the setting is changed and the iPhone is disconnected from the computer, you’re ready to sync over Wi-Fi. You’ll never need to change that setting on the computer again.

Follow these steps to sync:

1. Confirm that the computer and iPhone are connected to the same Wi-Fi network. The iPhone cannot be connected to Wi-Fi at work and sync with a computer at home.

The iTunes Wi-Fi Sync screen lists the computers you can sync your iPhone with, when it was last synced, and a Sync Now button. Tap Sync Now.

Tips to Sync iPhone Over Wi-Fi

Syncing an iPhone wirelessly is slower than doing it with USB. If you have a ton of content to sync, use the traditional wired method.

You don’t have to remember to sync manually. When an iPhone is connected to a power source and is on the same Wi-Fi network as the computer, the phone syncs automatically.

Using Wi-Fi sync, you can sync a phone or iPod Touch to more than one computer, as long as those computers are authorized with the same Apple ID.

You can’t change the sync settings on an iPhone or iPod Touch. That can only be done in iTunes.

Troubleshoot iPhone Wi-Fi Sync

If there are problems syncing the iPhone over Wi-Fi, try these fixes:

• Restart the iPhone.
• Confirm that both devices are on the same Wi-Fi network and that the computer isn’t in sleep mode.
• Check your firewall. Depending on the firewall settings, the firewall could be blocking the ways that the iPhone connects to the computer. Make sure the firewall allows connections on TCP ports 123 and 3689 and UDP ports 123 and 5353.

If the iPhone can’t connect to Wi-Fi, it won’t sync using Wi-Fi. Find out how to fix an iPhone that can’t connect to Wi-Fi.

Sync iPhone With iCloud

You don’t have to sync with a computer or iTunes at all. If you want, sync the data on the iPhone to iCloud. Some people prefer this option. For others who don’t have computers, it’s the only choice. Learn more about how to back up your iPhone to iCloud or how to use iCloud to sync the Notes app across devices.

Get the Latest Tech News Delivered Every Day

Источник

Синхронизация контента iTunes на ПК с другими устройствами по сети Wi-Fi

Если Вы подключены к сети Wi-Fi и у Вас есть iPhone, iPad или iPod touch с iOS 5 (или новее), Вы можете выполнять синхронизацию устройства (добавлять на него объекты с компьютера), не подсоединяя устройство к компьютеру (если компьютер и устройство подключены к одной сети).

При автоматической синхронизации устройства по сети Wi-Fi используются те же настройки, которые Вы выбрали для синхронизации через кабель.

Включение синхронизации по сети Wi-Fi

1. Подключите устройство к компьютеру. Для подключения устройства можно использовать кабель USB или USB-C, а также подключение к сети Wi-Fi. Чтобы подключить устройство с помощью кабеля, см. Синхронизация контента iTunes на ПК с другими устройствами.
2. В приложении iTunes на ПК нажмите кнопку устройства в левой верхней части окна iTunes.
3. Нажмите «Обзор».
4. Установите флажок «Синхронизировать с этим [устройством] по Wi-Fi».
5. Нажмите кнопку «Применить».

При отсоединении устройства от компьютера значок устройства будет по-прежнему отображаться в iTunes, пока Вы не нажмете кнопку «Извлечь» .

После нажатия кнопки «Извлечь» устройство исчезнет, но синхронизация по сети Wi-Fi останется включенной. Значок устройства снова появится при следующем запуске iTunes (если компьютер и устройство подключены к одной сети Wi-Fi).

Синхронизация устройства по сети Wi-Fi

Ниже описаны способы беспроводной синхронизации, когда устройство и компьютер подключены к одной сети Wi-Fi (компьютер должен быть включен).

• Подключите свое устройство к источнику питания. Синхронизация начнется автоматически.
• В приложении iTunes на ПК нажмите значок устройства, затем нажмите кнопку «Синхронизировать».
• Добавьте объекты на устройство вручную путем перетягивания.

Примечание. Для восстановления программного обеспечения iOS или iPadOS устройства и восстановления заводских настроек необходимо подключить устройство к компьютеру.

Устройство можно синхронизировать по беспроводной сети с несколькими компьютерами, но содержимое каждого типа можно синхронизировать только с одним компьютером.

Синхронизация по сети Wi-Fi происходит медленнее, чем по кабелю. Если подключить устройство к компьютеру кабелем во время синхронизации по сети Wi-Fi, то синхронизация продолжится по кабелю. Если отключить кабель устройства от компьютера во время синхронизации, то синхронизация прекратится, даже если синхронизация по сети Wi-Fi включена на устройстве.

Источник

Sync content between your Mac and iPhone, iPad or iPod touch over Wi-Fi

You can sync your Mac and device when they’re connected over same Wi-Fi network. To set up Wi-Fi syncing, first connect your device to your Mac using a USB or USB-C cable. You then turn on Wi-Fi syncing and choose the settings you want. Whenever your device connects to your Mac over Wi-Fi, you can select it in the sidebar and sync it. (You can turn on automatic syncing if you want.) Your device must have iOS 5 or later or iPadOS 13 or later.

1. Connect your device to your Mac using a USB or USB-C cable.
2. In the Finder on your Mac, select the device in the Finder sidebar. If you connect your device to your Mac using a USB cable and can’t see the device in the Finder sidebar, see If your device doesn’t appear in the sidebar.
3. Click General in the button bar.
4. Select the “Show this [device] when on Wi-Fi” tickbox.
5. Use the button bar to turn on and select sync settings.
6. Click Apply.

Whenever your device connects to your Mac, the device’s icon appears in the sidebar. Select the device in the Finder sidebar to view or change syncing options.

Important: If you don’t see your device in the sidebar, choose Finder > Settings, then select the CDs, DVDs and iOS Devices tickbox.

You can choose to sync your Mac and your device automatically whenever you connect them. See Turn automatic syncing on or off on Mac.

Before disconnecting your device from your Mac, click the Eject button in the Finder sidebar. The device icon disappears, but Wi-Fi syncing remains turned on. The icon reappears automatically the next time your Mac and device are connected to the same WI-Fi network.

Note: To restore your iPhone, iPad or iPod touch and revert it to its factory settings, you must connect the device to your Mac using a USB or USB-C cable.

Syncing over Wi-Fi is slower than syncing over a cable. If you connect a device to your Mac while the device is syncing over Wi-Fi, syncing continues over the cable. If you disconnect the device’s cable from the Mac while syncing, syncing stops even if Wi-Fi syncing is on. Syncing resumes when you reconnect the device using a cable or over Wi-Fi.

Источник